Now there's some good O'l boys that aren't afraid of getting there hands dirty and doing there own work, we need more neighbors like this. Right on guys great job.
You prolly dont care but does anybody know of a way to get back into an instagram account? I somehow lost the login password. I would love any assistance you can give me.
Nice, I'm in the middle of upgrading my stage 2 too a stage 3 , I got slp 3 in full exhaust 2in long tube headers cold air intake, tsp lifters and push rods with btr springs and cam, im really hoping for over 500 rwhp
Hey guys hope all is well there. I have a 2010 ss that am willing to install stage 2 cam and looking for help to do the work, please let me know if I can count on your, where you located then we can talk about cost to help Ty all
Forgot to ask, who did your tune? I did the exact swap then did the EFI Live thru BlackBear performance and he just can't get rid of the slight flat spot at around 1800 RPMs upon acceleration.
What a sweet sound! I have a 2010 L99 with just headers, cats, and chambered mufflers and a Diablo tune. It sounds good, but not as nice as yours. BTW, mine is the same color. !
did yall do your own timing after the install? I've got '98 camaro SS with the same stage 2 camshaft but runs too aggresive, stalls the engine at low revs after a couple of pulls.
This was my buddy’s car and he bought all the stuff from Texas Speed not sure what exact parts they were but it’s stage 2 cam, valve springs and trunnion upgrade. You can call Texas Speed and they can help you. Thanks for watching!
@@EdsGarage99 Thank you. Putting a list together for my 2010, 2SS/RS Camaro, LS3. Probably going with GPI SS2 with TSP .660 springs. And then the other usual items. 👍
We put headers on it and the rest was already on the car don’t know if it was the stock setup or not but look like glass packs you can check out this video where we put the headers on ua-cam.com/video/M8xx5aTXXYA/v-deo.html
Elemuel Crankfield valve springs, trunnion upgrade, push rods and timing cover gasket. It’s all from Texas speed they well let you know everything you need for your cam swap! 🤙 Thanks for watching!
Elemuel Crankfield no we didn’t do the lifters, it’s doing fine. But if you got an engine with DOD or AFM you need them or high mileage then yeah I would replace them, just my opinion I’m no professional 🤙
I just wanted to say “Thank You” personally. Watching this video helped me tremendously when installing my cam kit from TSP. Great content!
You’re welcome! I glad it helped you! Thanks! 🤙
Now there's some good O'l boys that aren't afraid of getting there hands dirty and doing there own work, we need more neighbors like this. Right on guys great job.
W Braico Thanks! 🤘
You prolly dont care but does anybody know of a way to get back into an instagram account?
I somehow lost the login password. I would love any assistance you can give me.
@Benton Hudson instablaster =)
Nice, I'm in the middle of upgrading my stage 2 too a stage 3 , I got slp 3 in full exhaust 2in long tube headers cold air intake, tsp lifters and push rods with btr springs and cam, im really hoping for over 500 rwhp
Sounds great man! I went to GPI SS2 cam and should have mine in on Friday of this week.
Beautiful sound!
"1:47" how the powerade bottle fits perfectly there is so satisfying 😌
Naa I'm him 🤣🤣
You guys are awesome, thank you & great content 💪💪
Thanks I appreciate it!✌️
Great video gentlemen!
Thanks!
Stick shift damn! I bet she is FUN!!!
Very helpful thank you
21:36 damn that sounds good
Seems like a lot to remove for cam shafts. My 4g63 wasn't to bad, I am looking at a 2011 2SS manual tomorrow though so good to know.
Lol I have a 2011 2ss and I just put the tsp chop monster cam in mine this weekend, going to get tuned tomorrow
Did you have to drop the oil pan?
Hey guys hope all is well there.
I have a 2010 ss that am willing to install stage 2 cam and looking for help to do the work, please let me know if I can count on your, where you located then we can talk about cost to help
Ty all
That stage 2 is slightly bigger than my stage 3 lol. I have 230/243 .621 .612 114 +4. Manual car made 470:435. Mine is same colour as yours.
I also got upgraded chain, ls2 chain dampner, trunion bushings, springs, pushrods.
Wesley Beeson Nice! It’s not my car though wish it was 🤣 it was my buddy’s Thanks for watching!
Who’s the mechanic that did your im in Virginia and want to cam mine
Bad ass
Forgot to ask, who did your tune? I did the exact swap then did the EFI Live thru BlackBear performance and he just can't get rid of the slight flat spot at around 1800 RPMs upon acceleration.
Dirty dirty racing in Va.
Thanks 👍
What a sweet sound! I have a 2010 L99 with just headers, cats, and chambered mufflers and a Diablo tune. It sounds good, but not as nice as yours. BTW, mine is the same color.
!
lawyers9 it’s not mine it’s my buddy’s but it does sound good! Thanks for watching!
Kinda unrelated but do you know what that phone mount was? Pretty good place to put it.
I don’t know man, it was my buddy’s.
did yall do your own timing after the install? I've got '98 camaro SS with the same stage 2 camshaft but runs too aggresive, stalls the engine at low revs after a couple of pulls.
We had to take it somewhere to get it tuned
can you post all the links to the products you used it would be helpful to see what I need to look for.
This was my buddy’s car and he bought all the stuff from Texas Speed not sure what exact parts they were but it’s stage 2 cam, valve springs and trunnion upgrade. You can call Texas Speed and they can help you. Thanks for watching!
@@EdsGarage99 ok thanks
U must of had it tuned before doing the cams because on LS motors even if u do a cam swap u have to get it tuned ur lucky it runs
Yeah he had it tuned after we put headers on and deleted the cats and had to tune it again after the cam swap
What was the length on the dowel rods to the tape mark? Thanks.
I can’t remember but I think I still have them somewhere I’ll check when I get off work, thanks for watching! ✌️
They are 19 inches to the mark and about 23 inches all together
@@EdsGarage99 Thank you. Putting a list together for my 2010, 2SS/RS Camaro, LS3. Probably going with GPI SS2 with TSP .660 springs. And then the other usual items. 👍
How are the stock lifters holding up?
Tommy Yang good so far
I want to install a cam but I have no clue how to 😅🤣.
what wheels do you have?
Colby tsw Sebring, thanks for watching!
What kind of exhaust system?
We put headers on it and the rest was already on the car don’t know if it was the stock setup or not but look like glass packs you can check out this video where we put the headers on ua-cam.com/video/M8xx5aTXXYA/v-deo.html
That’s the only mod you did? Everything else stock right?
It also has headers and cat delete
Timwuan Carter you can check out my other videos to see everything we did to it. Thanks for watching! ✌️
How long did it take for you guys to install it
J Highroller I can’t remember the exact time but we got it done in a weekend, we took our time. Thanks for watching!
@@EdsGarage99 I have a 15 I wanna cam swap. Did you guys change the timing and what brand camshaft you went with ?
J Highroller it’s a Texas Speed stage 2, and you have to get it tuned
@@EdsGarage99 ok thanks.
What all did you buy with this cam?
Elemuel Crankfield valve springs, trunnion upgrade, push rods and timing cover gasket. It’s all from Texas speed they well let you know everything you need for your cam swap! 🤙 Thanks for watching!
@@EdsGarage99 thanls im working with a dealer for texas speed and he said lifters to did you install those as well or are u doing fine without
Elemuel Crankfield no we didn’t do the lifters, it’s doing fine. But if you got an engine with DOD or AFM you need them or high mileage then yeah I would replace them, just my opinion I’m no professional 🤙
@@EdsGarage99 2010 camaro ss with a ls3 with 10k so i don't think i have dod or afm
Elemuel Crankfield no it don’t have none of that, I don’t think you need them but that’s just my opinion..... you doing a stage 2 cam also?
Is it daily drivable?
It’s not mine but he was driving it daily before he sold it ✌️
Awesome, thank you!