There is no glue on it it looks not too hard to remove check this video out. It is the same process to remove it m.ua-cam.com/video/Znzu5eZzRn8/v-deo.html
You won't. 😂 I made the teardown video because the VTX was dead... I got the one with the broken FW, one of the first batches, so I flew it once and then it bricked itself and TBS sent me a new one.
Well I havent tryed the audio I dont use headphones... But it looks like there is no mic inside :D might be under that liquid electrical tape. But I dont know.
@@SHERMA. no. Mine was damaged from squirting corrosion x all over my electronics. I replaced 3 mics on that VTX way back then and went with rush tank ultimate + w/ AGM and has not failed me for the past 2 years. Assuming you have had audio working with your gear with other vtxs and your unify is new, return it. I replaced mine with 3 mics ordered from digikey years ago. tbs support provided a part number. I just looked up my order history, SPU0410HR5H-PB is now obsolete. However, CMM-3729AT-42308-TR is available, same specs and pinout. I used a cheapo hot air station to replace. Good luck.
i was wondering what it looks like inside but didnt wanna take it apart lol so thanks for this video
Yeah I wanted to take it a part too😅 and I got an opportunity because it broke so...
where is the mic?
Good stuff, BIG LIKE
Oh man I have the same issue. After the first crash it was broken. It was so expensive why it is so fragile.
I need to change the mmcx connector, the isolation glue is also on this or not? can you remove it ?
There is no glue on it it looks not too hard to remove check this video out. It is the same process to remove it m.ua-cam.com/video/Znzu5eZzRn8/v-deo.html
Does it look like it’s already conformal coated?
Yeah it probably is
Can you show whats under that type, I am not sure which chips is this using
I don't have it anymore, it was broken. And after 2 years it got lost somewhere. 😅
Can i use any type of eachine for the view of live video . REPLY BCOZ I HAVE WRITTEN WITH HOPE
No, you cannot use any type of eachine for the view of live video.
Do i need resolder these pins?
No they are just pushed on and holding together by standoffs and screws
my button is broken how do i fix it? also i tried opening it up but i wasnt able to remove the top cover it was stuck
You have to pull it apart with more force. But if you dont have hot air station you cant replace the button really.
Did you have this set up with vtx tables? I can’t get mine to work on my kakute f4 on BF 4.1.3
It is set by default to CRSF comunication you have to change it in TBS agent and then you can use SA.
DJ_POP that was it. Thanks man.
if the button is broken, how do you make it unlock ?
You won't. 😂 I made the teardown video because the VTX was dead... I got the one with the broken FW, one of the first batches, so I flew it once and then it bricked itself and TBS sent me a new one.
Mine broke too good thing the first thing I did was unlock it now I really don't need the button but it still sucks its broke
Any solution for broken botton of unify pro32... Now I can't unlock my vtx becoz of a broken botton..
You can try to short the 2 sides of the button with the screwdriver or something like that.
wheres the damn mic? Because I cant get no sound though mic=on
Well I havent tryed the audio I dont use headphones... But it looks like there is no mic inside :D might be under that liquid electrical tape. But I dont know.
@@popfpv I may have to flip it. I have it zipped to bottom plate against thin thermal pad. Maybe one them through holes is a port to it.
@@popfpv nevermind, I spoted it. its that gold rectangle with hole on top next to pins...thanks for posting
@@mas2ery did u ever get ur mic to work? i have audio mic=on in tbs agent software but still get no sound -.-
@@SHERMA. no. Mine was damaged from squirting corrosion x all over my electronics. I replaced 3 mics on that VTX way back then and went with rush tank ultimate + w/ AGM and has not failed me for the past 2 years.
Assuming you have had audio working with your gear with other vtxs and your unify is new, return it.
I replaced mine with 3 mics ordered from digikey years ago. tbs support provided a part number. I just looked up my order history, SPU0410HR5H-PB is now obsolete. However, CMM-3729AT-42308-TR is available, same specs and pinout. I used a cheapo hot air station to replace. Good luck.