RE7R01A Teardown
Вставка
- Опубліковано 22 сер 2020
- In this video, i teardown down my first 7 speed Infiniti transmission. Car did not move due to a clogged filter which was caused by a bad converter. Not a bad unit to work on. Thanks for watching, off to the shop this morning
- Авто та транспорт
Thanks for the time you take to put into these videos! You have your hands full with this one.
As always another well made informative video, thank you for sharing your knowledge with us.
Thanks for chiming in every week
My 2012 M37 is exhibiting these exact symptoms, thanks for this video. I'm going to tackle this job.
Not a bad trans to work on, be careful
You are awesome! I remember the first transmissions I tore down for tech school. Those were just 3 speed turbo 350's and all the parts freaked me out. I've done Jatco's 40/50 series and CVT for Mitsubishi since they wouldn't replace them and we had no choice, but that's probably the simplest transmission I've seen. You just non nonchalantly lay parts from several transmissions all over the place. I wouldn't be able to sleep at night. LOL
I'm going to try again though, because I've got a Challenger with the ZF 8 speed and when the warranty runs out I want to be able to take care of it myself. Good job!
ZF8 speed nice trans to work on, need special tools for that unit
Gary, Great video! Thank you for pointing out the capped filler tube. I was wondering, does that filler tube go all the way to the oil pan? I ask because I would like to do a drain and fill on my transmission and per the factory manual the level needs to be set when the fluid is exactly 104F. Since I can't access the transmission temperature without the Nissan Consult computer, my thought was to use the filler port as a way to gauge the fluid temperature after I have done a drain and fill. Your thoughts sir?
Put in what you drain out, you will be close. You can use a infrared temp gun on the pan. You will be close when water temp gauge is normal zone after coolant thermostat opens. Filler tube goes into pan. I had the Nissan dealership do my G37S, a drain and fill only drained about 4 qts., they used Matic S fluid. Run it with brake on through gears a couple of times, car level.You would have to do 2 or three in a row to get it looking red and clean. I think I will use the Valvoline Max full Synthetic next time, it is Nissan approved. The Matic S says it's ester based...Which leads me to believe it is semi or non synthetic base oil with an ester package. Do not let anyone run solvent through or use a pressure based fluid exchange system. Tricky deal with no dipstick tube for jack stands and manual pump. Lifetime fluid they try to tell you. Bad joke! Nissan charged me about $150.00. But,will use their fluid.
e meus parabéns pelo excelentetrabalho e por mostrar os segredos do cambios automaticos
Thank you for watching
Awesome videos I have a question I have a 6l90e off a 2011 2500hd. It doesnt go forward or reverse gears at all. I tried Drive reverse and manual.
So no movement at all? did this happen suddenly
@@GaryFerraro no movement at all. Idk the truck was given to me. So i dont know history
Thanks Gary
Thanks for watching Ron
Too bad that there is very little information on these transmissions, can't even buy a filter. Stealership says non service item...They don't want to change the lifetime fluid ... Even the solenoids numbers can be the same number but have different voltage values for different years and models. Then the ecu won't know what to signal... Many shops will not work on these. Your very meticulous Gary, nice work!
www.ebay.co.uk/itm/Transmission-Oil-Filter-For-RE7R01A-JR710-JR711E-Nissan-Patrol-5-6-Infiniti-/254891697549?_trksid=p2349624.m46890.l49286
Would a transmission from a 2015 Q50 AWD work in a 2014 Q50 AWD?? The transmission I’m looking at has 5K miles on it so I want to grab it if it’s compatible I’m just not sure, any input would help. My car was build 9/13 (2014) , The Transmission is from 11/14 (2015 Model Year) thank you so much in advanced!
I'm Honestly not sure, you would have to go by the Vin numbers to see if it would fit
Teste de aplicação nas embreagem vc não faz?
Tem como vc me da uma dica sobre este câmbio?
Not sure what you mean by exchange rate. Does the trans have a problem
Yes the valve body is sold separately just put one in my g37 as it was failing
The valvebody/tcm you purchased as one?
@@GaryFerraro yes my g37 wouldn’t shift past 3rd gear and was throwing a code for a bad speed sensor but Infiniti said it was the valve body so they put a new one in it was a 2400 dollar fix (part was $1350).
@@5.7_TY Haven't gotten many 7 speeds yet but i'm sure they will start coming in the shop
irmão cambio diferente parece frontier 5 marchas
Hi sir can you send parts and give support for doing work .. Am in india and need a assit,
I do not sell parts, what trans are you working on
Can you rebuild mines
Why are you doing it? it costs 160 dollars. take another one and put it on. How are you going to assemble this now? I scattered everything and filled it with oil. and what kind of interior is this? What is this, Russia?
what cost 160?
@@GaryFerraro yes
@@JuliaI.-wf3pw still confused
@@GaryFerraro transmission
@@JuliaI.-wf3pw wow thats cheap, here they are thousands