How to fix blinking lights on Montero Pajero Activ Trac Super Select
Вставка
- Опубліковано 18 січ 2019
- How to pull codes and diagnose blinking dash lights on the Activ Trac Super Select Mitsubishi Montero and Pajero trucks. I also cover the most common codes and the appropriate fixes and repairs.
Codes: i.postimg.cc/GtydYf26/Screens...
Super Sheet: i.postimg.cc/HkCXJDnD/AT2.jpg - Авто та транспорт
Thank you for the video! I just got a 2004 Montero and am working through the list of codes, great to see someone else in the US that truly appreciates these trucks.
I am Arabic and I do not speak English. So you can write what you did briefly please I can program it and thank you
Love to see someone who appreciates mitsubishi! Nice endeavor back there i have both as well a 2001 mitsubishi montero limited and a 2004 endeavor xls both reaching almost 200k miles still strong! As long you change the timing belt on time they will last forever!
WOW...! Awesome advice David..! My 93 Montero Sr gets stuck in 4x4 every single time I shift into it. Now I know what to look for. Thank you for sharing this Sir.
Dude thx! In addition to giving me much info on my 4wd system u saved me from stress in the last minute of your video. I recently tried shifting in 4wdl and the car started beeping. I tried everything to get it to stop and if I had not watched your whole video I would not have known about the need to be in neutral when shifting into 4wdl. So..I started the car, shifted into neutral and boom! All good. Much thx
Me too . Really good information .
This video has given me so much information, appreciate you taking the time to record this
Great video! Man i ordered the 5 switches and the vacuum selenoids! But before i put them in i decided to take a look under the car! Turned out that conector under the oil filter had a broken wire! Splined it together and now everything is working fine!! 🙏 thanks!
Thanks for this great advice David, guys like you are what makes youtube so helpful!
I know Im asking the wrong place but does any of you know a tool to get back into an instagram account?
I was dumb lost the account password. I love any assistance you can give me!
@Boston Juan instablaster =)
@Zechariah Donald i really appreciate your reply. I found the site thru google and Im trying it out atm.
Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.
@Zechariah Donald It did the trick and I actually got access to my account again. I am so happy!
Thank you so much you saved my account!
@Boston Juan no problem =)
Thank you so much for this great video. One of the best videos out there regarding this problem. I have a 2008 Pajero 35" , which I can now diagnose better from your help. Thanks man! Kind regards from Iceland.
I had front wheel light blinking issues. It turns out that one of the wire of the sensor switch was cut. If it wasn’t for your video, i wouldn’t be familiar with the system. Local mechanic, advice me to change the transfer case. Many thanks man. You are legendary!
My front tire light flashes too and rear tire lights don't come on
Tons of knowledge here! Thanks for making this video.
Very useful video! Thank you!👍💪👏
Hi David
I am from Zambia in Africa and must say I found your presentation quiet helpful, may I have more of your videos on such topics please.
Legend - Thanks from Adelaide, South Australia
Thank you very helpful indeed. I have the dreaded cdl flashing orange on my 2017 pajero which has done only 60k kms.
No problem, glad it helped. 👍
Thanks a bunch for the help!!!
Found the presentation very informative. Had to subscribe. Where can I find the group you're in? I can tell you are a great guy. Keep up the good work!
I'm actively on the Facebok groups.. Misubishi Montero USA and Mitsubishi Gen 3 Squad.
thank you for posting
Very helpful video thanks for taking the time
From Australia thanks man
This video is very informative.My experience was to try all these things and when it came time to purchase transfer case switches I went for one of the cheap aftermarket sets (-$50).These actually made things worse as the vehicle would no longer shift from 4th to 5th and still had flashing lights.I rolled the dice and bought OEM Mitsubishi switches for $330 and like magic everything was working properly!
Dude.... Thank you!
Not a problem. Glad you enjoyed it and hopefully it helped.
Great video. I have a transmission issue in 2003 Montero ltd. wheels lock middle of the road 2WD mode.
Why no more videos ..this one was very helpful 👍
Thank you so much.
Any help appreciated!!
Thanks for the help David! i tried to pull the codes by connecting a wire to pin 1 and 4 but all lights went off completly nothing is blinking. Any suggestions?
Gonna try your advice. Thanks for making this video, David. Question: If the actuator is corroded, how can it be cleaned?
Thanks for the video very informative....will the 4wd and center diff engage although the lights are blinking?
Such a helpful video. Thanks
I have the same codes as you on mine. 33 and 41 would 41 pretty well be the actuator as well?
That's a nice truck
OMG, if you knew how this video saves my time, energy and patience ^^ Thank you so much. But hey i've got an other problem. I have to change the switches of the transfert box. But every time i buy one, or a pack of five, they are all of normaly closed type... Do you know where i can buy the right one ? The normaly open ? Thanks ;)
What a great video. I am currently having a problem with my Pajero glx. All vacuum hoses on the gearbox and transfer case have been removed. It lost power,speedometer doesn't work.etc. may u pliz describe for me how the vacuum line immediately next to the gear lever(not transfer case lever) connects to the transfer vacuum lines and I restore this 4 WD? Eric.
Hi David. Thanks for the video.. great info. I have a 2003 Montero Limited (in Central Indiana). I grounded pin 1 to pin 4 and the center diff light simply blinked uniformly (I think the short blink) for many minutes. It did this both times I tried it. Any thought on the reason for that? Also, I have a Zurich ZR11 code reader, and it has supposedly reads Mitsubishi ABS codes and it showed a code 35 "engine fail". Do you have any info on whether these issues may be related? IT's from the rust belt, so I'm guessing some of the five Tcase switches are corroded and not working right. I look forward to your thoughts? Thanks.
I would attempt the pin 1 & 4 again to make sure or pin 1 to a ground. If the 4WD lights are blinking then you have a code that goes with it and you need that code. Engine and ABS codes read from a diffrent ECU and will not represent the 4WD system.
Thanks for the video, great help. I’ve got code 33 and am going to replace all 5 switches. Can you tell me the steps to dropping the transfer case? Did you do it with or without disconnecting the driveshaft?
No, yull have to disconnect the drive shaft and then drop the tranafer case mount and lower the case with a jack. You can lower it enough to reach the switches but youll still have trouble seeing them. So sme feeling around is required.
Buy Genuine Mitsubishi switches not cheap aftermarket ones.
can you give the connection of your bypass to make? because im having the same code 33
David, Thanks for sharing. Good stuff!... On another note,..what type of bumper Make/model is that? Where did you get it? R/
Your welcome and hope it has helped.
Its is a Jeep JK bumper thats 72" wide. Anything shorter won't reach the fenders. I made custom brackets that mounted around the Montero frame to bolt the bumper too. Jeep bumpers have flat plates for mounting so they're not too hard to adapt.
Hi David, just got my 2000 NP DID. Awesome so far but my front wheel indicator blinking and I'll try getting the code. My question is it ok to stay in 4H? Noticed the rear wheel indicator doesn't light up. Thanks for the great vid, I'm learning something new for my truck.
Ok tried pulling any error code, the engine light just blinks, not long and short - just blinks...
Thanks. Now I understand how this system works.
I've got a 2003 Montero Limited, 3.8L, 217,000 miles. I've also got the infamous Differential Lock orange blinking light that would come and go for months and eventually stayed, and DTC 33 when I read the codes by jumping pins 1 & 4 on the OBD2 plug and counting the blinks. I also had codes 34 and 35 but after swapping the Freewheel Clutch Solenoid and disconnecting the battery for 5 minutes, the 34/35 codes went away and only 33 remains...the center orange light blinking and no control of the system remain also.
The ground cable on the transfer case is good. All device plugs, vacuum hoses and wires are connected, clean and tight. Voltage reads 10.8-volts from each of the switches' harnesses with the ignition key On.
I'm trying to figure out which Transfer Position Switch(s) (1 thru 5) is actually bad, before dropping the t-case to swap all 5 of them out. I want to be sure something else is not the issue making it look as of the switches are bad, as I hate swapping parts and doing unnecessary labor. I'm suspicious because I know the clutch solenoids were bad because I tested them, but I doubt they went bad, plus a t-case switch also...as in simultaneously. Maybe so, maybe not.
I have a test light probe and a digital voltmeter/ohmmeter. Is there a test procedure to test each switch before dropping the t-case and removing them to be sure it is a switch (or maybe two) and not another issue?
Thanks!
You solved it?
@@ibbi270 yes. When the solenoid failed it confused the 5 switches. All I did was manually open and ground the applicable plugs to make it cycle from 2wd to 4 low lock and then back to 2h. It reset the switches. I would not suggest changing switches until you do this first, especially if you had a 4x4 part fail and it was replaced.
Were did you get that bumper I love it I have the exact same suv
Hello Sir David, I know it doesn't have anything to do with the main content of your video but where can I get a bull bar/guard like your Montero's. I've come across the single tubular model that only holds the fug lights and a winch platform. I like the looks of a full size bull guard.
The bull bar front bumper i have is a custom fit i did my self. It is a 72" wide Jeep JK bumper. I made custom brackets that bolted around and through the front frame support with plates to mount the JK bumper too. If your looking to use a jeep JK bumper, anything under 72" wont reach the fenders so keep that in mind.
Thanks Mate
I have the centre diff light flashing when driving for a distance. I have a new vacuum solenoid and at the freewheel actuator there is suction in one pipe when in 2H and in the other when in 4H. However, actuator does not move in or out. It does move by hand so not seized. So I am guessing the actuator needs replacement?
Nice video man appreciate it! I had no idea diff codes don’t show up on OBD 2. I’ve had the center diff light blink on me two times On the highway now but it went away after restarting the car. Hasn’t come back but still a little worrisome. Would the codes still read right now or do they only show up as issues are happening. Thanks!
You could still try to pull the code once its cleared. It does seem to store for some unknown period.
David G. Thanks bro! I’ll give it a try
David, are you still answering questions on this video? I have a 2003 very similar to yours but I also have a 2001 XLS and the flashing codes appear on the ABS dashboard light. Have you come across anyone with the same problems but from this year model? is it normal that the it uses the ABS light for emitting those codes?
I am, and if the ABS light is flashing then there is a code attached to it. I would try to pull the ABS codes before moving forward. The ABS system communicates with the Actic Trac and Super Select but ultimately the ABS system is its own entity and youll need the code in order to resolve the issue.
Thank you so much. I got scared when my 2wd light disappeared and the center light staring blinking. I was on the road. Towing a small mazda miata. Pretty light for a mid SUV
I am Arabic and I do not speak English. So you can write what you did briefly please I can program it and thank you
Orlan Medina hi mate how did you adress this problem, having the same issue here, thanks in advance
Please I would like your help. There is the gear lever of my mitsubishi pajero manual gearbox which shakes a lot on takeoff. It also shakes when I slow down to stop for example. Often also It goes out while I am driving normally 80km/h.
The mechanic checked the oil in the gearbox, it was missing, we added oil but the problem persists. He also checked the fuel injector pump but still the problem.
Finally he told me that I have to change the clutch disc. Need your opinions please
Nice evo by the way! Hey i have a question i ordered all 5 switches im getting code 33 and they all look the same except for the wires colors are different!! Are they all the same or they go in certain position on the transfer case?
Each goes in its own position. If you hit the details on this video i have a super sheet linked that lists the part numbers, wire colors, and locations for each sensor. I took the time to find an amazing amount of great info you normally have to search the entire manual and then the internet for hours to find, and then out it all on one awesome sheet, enjoy mate 😉.
David G. Cool!! Thanks a lot!!
Hi David just wondering if you know how to fix indicator light and hazard I try nearly everything Pajero 2006 NP diesel thank you
Do you have a spreadsheet for the fault codes by anychance
David I'm getting 2wheel high light but only the left rear tire light is on ?
My problem too
Hi there, i replaced yesterday all 5 switches and still have the same problem so i guess problem wasn't in switches????
Also do you know how to remove the plug? I been trying but no progress it was covered in carbon
What kind of a bumper is that? I love it. Can you send some info of it?
Its a a wide jeep JK bumper with custom made mounts to get it attached to the frame.
Do you mind sharing how to bypass the code 33?
Hey david. I do have a code 33 on Montero, I replaced all 5 sensors, check the actuator and it is working, but the orange light still blinking and dosen't let the transfer lock on any position, Do you have some ideas or tips cause I try also the shifter and nothing works. . Thank you. Also if can show how you did the bypass.. thanks again..
What fixed your issue? Similar issue on mine. Thanks!
Thank you so much for this video. Do you have the full file for the fault codes?
Mine currently have codes, 31, 38, 42, 52, 64 and 83. Any help please?
What year and model Montero do you have. The chart i have linked in description is all the codes listed. You either have a diffrent model or your not reading the codes correctly.
will this work on a 2011 montero sport? im afraid to cause a short?
You stated that you were going to post a link to a chart with the definitions of the codes in the video description, but I don't see it. Also, I believe to read the codes after shorting pins one and four on the OBD-II connector, the key must then be placed in the "run" position, not the "acc" position, as you stated. And if there are five transfer position switches and one is bad, giving you the 33 code, why would you say that a lot of people just change all five? Isn't that like people replacing the solenoid pack to start with, before even pulling codes...except a lot more expensive? Lastly, can you pull "any" of these codes out of an OBD-I/pre-96 Montero?
It's a 26min unscripted video of me rushing to include a lot of information. I misspoke several times but for the most part all of it was corrected a some point. People change all five because it's a lot of work to change one and the same amount of work to change five. It's not even comparible to the solenoids. Replacing all would be preventive maintenance after the problem is fixed. Randomly replacing the solenoids cause your lazy to take 2sec to check the code is just moronic. You can pull these codes of any of the active-trac and super select equipped vehicles.
@@davidg.9478 David,if u could avail us ur watsapp number,we would keep in touch with graphic or photographic representations of what we r talking about unlike UA-cam videos and their hardship loading.
I've got a 2005 Montero, and one of the lights indicator (rear left) it's off...code it's 35 and apparently I'm not having that wheel enabled (engaged). The system it's up and running, actuators, vacuum set up and the valve switches are working properly but sometimes when driving the transfer light indicator starts to blinking orange. Do you have any clue about where should I start to look into for a quick diagnose? Thanks for your help!
If one green light is off but the one beside it is on as with the rear wheels... that means you have a light buld blown out. The two front wheels and two rear wheels will always be on or off together unless a bulb is blown. Not a big deal but if it bothers you, youll have to replace the bulb. The code 35 is the front wheel engagement actuator and switch. Watch the area in the video related to the front of the truck, specifically when i talk about the "actuator" and the "switch". Dirty switch plug, bad switch, dirty actuator, or one of the two vacuum lines that goes to the actuator need to be replaced.
@@davidg.9478 Just got the whole diagnosis you mentioned before and checked the dashboard, turns out one light bulb is missing; couldn't find it from nowhere...do you have any idea where I can find the OEM spare? The light bulb it's a T5 S BD8 but the ones I ordered at eBay didn't fit well and I'm kinda needing some advices if you have any.... thanks in advance for all your help man!
thank you for the video it is so helpful i got the code 34 can you tell me what's that means ???
by the way i have a PAJERO 3.2 did 2001 engine 4M41
@Jannik Sobrado not yet hhhh
I found problrm in the vacuum and the switches.....
A lot of problems
@@guesmiomar454 hows it going? I fix mine after spendinh 4 months waiting for parts and a good mechanic lol
Hi mate got a code 75 do you know where to start with a fix ?
What happens when your pulling codes on diff and center lock light keeps flashing?
Hi, I have same problem with my Mitsubishi Pajero 2009 when I drive in highways with 90km/h speed and higher, the scan tool shows a code U1120 with super select 4WD. Do you know what the problem is? And could you please help me with this issue?
Hi David I have code 75 come up with center diff light flashing and no 4wd selection was thinking it was one of those 5 switches any thoughts ?
Are you sure its code 75? I don't know of a code 75.
@@davidg.9478 sorry David got this code with a gscan code reader . Did just check it by grounding the ob connector you showed and got code 33 witch confirms what i was thinking thank you
p.s great video very informative
Good stuff mate and thank you.
If you want to figure out which switch is causing the issue and have some basic knowledge with a multimeter, the super sheet in the link will show you all the positions and you can check each one to see which is not in the right position.
David G. Hi david sorry to be a pain but did all 5 switches code 33 gone now I have front wheels flashing and code 32 coming any thoughts thank you
I have code 75 in my traction control i replace all sensor switches on my transfer case but still blinking center diferential and traction control
Hi David. My Montero 3.2 DID from 2000 with 4M41 motor has a blinking light in all positions except 2H. But it is very special. f.i. if I switch from 2H to 4H I hear the system under the car work and it drives 4 wheels. But after about 10 seconds I have the blinking light and the 4 green light switch off. It keeps 4 wheel drive after this. But now it is not possible to switch to another position. I have to switch off the motor and start again and then I hear the system work for the position I have chosen. Again blinking light after 10 seconds except for 2H. In these 10 seconds all lights work properly! I supose that the old owner has not used the 4WD very much. Thanks for your help. By the way, I found code 23 yesterday. My garage cannot find the problem. Is this fault indeed code 23?
Hy, wat was the problem by you, i have similar problem ?
@@aeperformance6765 Hello, I still did not repair the problem. I should have go to a Mitsubishi dealer but they are very exspensive. Probably one of the sensors on top of the transferbox is broken because the "all brand garage" did not lower the box. I like to hear from you how you solved the problem. Succes.
@@guido53 hi, i have found 2 codes by me, 23 front speed sensor 2 and 35 front whell engage, need to check this, it is good if you can recive the codes, than you bether know where to look .
@@aeperformance6765 Tell me please how you have solved the problem. I have my car on my holiday adress where I do not have much tool.
@@guido53 i have Launch diagnostic, and i culd read the codes in transfer case. But you can trough the blinking lights read it to, every bliknk is x10 calculated. slow blink is first number, fast blink is second, i hope it helps.
Very informative video. Thank you. You seem to be very knowledgeable. I have a related issue with my 2004 that Mitsubishi can’t seem to figure out If you are willing to help I can send you a detailed description and video of the clunking rattling sound Thanks
I did this on my 2001 3.2 DID Pajero, my transfer case light blinks constantly at a fixed rate. However, my ABS light gives me codes 21, 22, 23, 24, 33, 52. Is this normal that the ABS instead of the Transfer case light flickers? I have a video that I can share.
ABS error codes can trip the Activ Trac Super Select system. So i would look into the ABS codes and in addition you can look at the 4WD systems codes to ensure the errors are in response to the ABS system. In your case you need to get tje bigget picture to determine the cause. If i get a chance i will look up the abs code definitions later today.
Same with me just did this I'm having a loud ding noise that's constant with abs light and brake light on brakes went hard . Changed out the entire booster unit and brakes came back but still getting the loudly annoying chime and abs and brake lights still on. Brakes great not sure what is wrong
from when i can get those codes sheets for my car?
Mitsubishi Pajero 2016 NX V87 3 doors 3.8 petrol
I have a link to code sheet in the comments that is good for the 4th Gen +2006. I haven't checked to see if there was any code added for your years. They are in the service tech manuals and not sure if the 2016 manuals are even obtainable yet. Mitsubishi tends to add codes and not change the older ones so the current list should still be valid.
I got 33 and 35. On actuator i try moving its not stuck. With change vacum line its disengate byt not engage. Also only on one line i have vacum. No mather if its 2h or 4h. How vacum work.
Hey David, I wanted to ask you about my car which is a 2006 Pajero,Whenever I switch the car to any type of 4WD the front light just keep Blinking and nothing happens and when i switch it to Low gear it just does the same thing but with the Dif Blinking too
Well, step 1 is to pull the codes. The front blinking lights is going to be one of the two main differential codes. I cover most of the causes for issues under the front of the truck in the video so i would start looking at that after you know which codes its throwing at you. The center light may be a result to the front lights blinking so i would put my efforts into fixing the issue causeing the front lights and then if its still blinking the center at you in low, then focus on addressing that.
@@davidg.9478 Okay then am looking to do it today Hopefully and thanks you are a life saver
My front tires light up green and flash . they are solid when in 4x4 no lights for back tires .also how you you use diff lock I don't see a button or nothing just 2h 4h 4l
The flashing green light indicate an issue with the front tires like i mentioned in the video. If the center yellow light is flashing it indicates an error or issue in the system. Your rear light should always be on unless the yellow center light is blinking. If no lights are on, then that means you've probably blown the light bulbs for the two rear wheel light indicators in the display. I didnt cover that, but i would atempt to replace the bulbs.
@@davidg.9478 thanks for the fast reply mine is 2001 and only has 2h 4h 4l is there away to unlock the diff lock features or is it a different rear end and transfer case also it does not coast when you let off the gas don't know if that is related or not no check engine lights on
Is it a Montero Limited, or Montero Sport? What country?
All the Montero Limited in the USA have 4L and the 4LLC which is the locked center. Its going to require the locking center differential. Im sure it could be swapped if you didnt have it, but its not something i could walk you through online.
Also, if its not coasting are you sure its in 2WD? Meaning the only light on would be the two rears, or if the rear bulbs are blown, then no lights at all. 😉
I would probably need more info on your vehicle to aid you any better, as im not fully aware on your vehicle configuration.
@@davidg.9478 I believe the rear green lights are blown my front lights blink most of the time it's a third gen Montero can't recall the exact model but it's the basic one not a sport it's real Montero and at 70mph I'm at 2900 rpm .does that sound right seems a bit high when I let off the gas it slows down pretty fast it doesn't coast at all the converter does not let go to coast I have no problems with it sticking while coming to a stop
Does this work for a 2000 mitsubishi Delica L400
Im not sure, would have to do some research on that one. If it has Activ Trac, its likely to be similar though.
Mine is blinking but only after driving for a while... i plan on checking the codes and then fixing it
I got 23, the front propeller speed sensor system. I have no idea where or what that is. If you could that would be great
faq.out-club.ru/download/pajero_iv/maintenance/Service_Manual_2008_2013/2008_eur/22/html/M122110410005200ENG.HTM
@@davidg.9478 thanks also do you where I can find the codes for my 02 3.5 NM.. just incase im chasing the wrong codes
@@thombo1524 no problem. The code sheet in he comment includes your year and model. So if the active-trac is showing code 23 it should match the description. However code 23 is not very common in this system. Id ask if there was any work done recently or suggest looking at the wiring and simple stuff first.
@@davidg.9478 I just recently bought the car so wouldn't know about any work done. I've checked the vacuum into the actuator, seems fine, it moves back and forward. All the connections seem good also. Ill replace the transfer switches before I try code 23
@@thombo1524 do you have other codes? Because looking at the other items wont help you with code 23 unless theres other codes your addressing as well.
What is the behavior of the bad actuator?
Is code 33 is necesary change, Set 5 Switches 4WD Mitsubishi Pajero V60 Years 1999 - 2007 MR580151 /2/3 /4/5
Code 33 is one or more of the switches not reading correctly. If you change modes it might clear up, but if it keeps happening youll need to change a switch most likely.
Avoiding 4LLC, does it go away in one of the other modes? If you can tell me what modes it goes away and faults in, we might be able to rule it to certain switches and you can first check the plugs.
@@davidg.9478 I send you a test video of each switch (Pajero V60 = Montero XLS o Montero Limited), in my case, I changed all the switches, they never failed me since 2003, and that's why I decided to change them all, and bought another set as a backup.
ua-cam.com/video/cGcpxEcjWDY/v-deo.html
Hi my actuator on the transfer case isn't working the gears don't light up when I select it, any idea?
Its likely not the acturator, but faulted and not telling the actuator to move. What are the codes?
@@davidg.9478 gonna check the codes now bro will reply shortly
@@davidg.9478 hi I did the paper clip test and the abs light flashes continously as well as the center diff light
Hello I have a problem When the four-wheel drive is turned off, the lights go off immediately
Im not sure if i understand what your saying. Could you word it differently?
Do you have email I can ask questions and send a picture to? Need some help with replacing the actuator.
Thanks
Front wheel lights blinking green, no code 34 or 35 just code 27 for transmission range switch.
Mine says code 31. What can I do to fix that?
Hi David, got a few issues with my 4wd system on my pajero 2003, I have uploaded a video of you could take a look and maybe think what’s wrong with it.
I have code 33. I just changed all the sensors and it still isn't working. It started to function but now it's stuff in 4wd and I can't get it out of there and into 2wd. It also won't shift into 5th gear. Any ideas?
After change the sensors, do you still have code 33 and center blinking light? Im going to guess you changed to after market switches and not OEM. The non-oem switches aren't as good, and sometimes you need to remove the washer to get them working correctly. The 5th gear issue won't be releated to the 4wd Active-Trac or transfer case. You may have unpluged something for the transmission while changing tbe sensors. You should get a normal Check Engine light code for transmission issues. I would check that with an OBD reader for clues on where to look to fix that.
@davidg.9478 I was having a center blinking light after I changed the sensors I got from RockAuto. I changed them a few weeks ago. Today, when I turned it on, the rear green lights were on. I began shifting through the 4wd. When I went into 4HLc, the orange light came back on. I moved the selector back to 2wd and when I drove it, it wouldn't swift into 5th even when I was manually trying to do it. I'm just trying to figure how to get it into 2wd so I can still drive it. When I turn the front becomes very stiff and almost feels like it's binding.
I have no blinking lights at all when started. Before start up all lights flash but after I start no lights. When I engage gears no lights what so ever
what kind of bumper is that? is it custom?
Its a 72" wide Jeep JK bumper. The widest they make. And then i made custom bolt on mounts which are coincidentally simular to the ARB bumper mounts. Turned out really nice, i like it more then the ARB options.
@@davidg.9478 yeah I like a lot better thanks 🙏
I got code 35 it apparently has to do with the solenoids
I am new to 4×4 and I got error 35 what can I do.
I have code 35 up as well have you found your problem
Can you help
I got a code 35
How did you fixed it
mine continues to blink.... does that mean no codes
If you have the blinking center light, then there is a code. If jumping the OBD pins it continues to blink the same way instead of blinking you a code, then your pins are not jumped out correctly.
@@davidg.9478 i jumped pin 8 with pin 4 and it just blinked a constant never ending or changing length or sequence.. the problem I'm having is after changing the solenoids because of partial engagement in 2wd but not 4wd(awd), now it won't fully engage in 4wd, i hear it but doesn't complete. I'm figuring it must be vacuum related. i checked the harness over the axle and it was clean, and i checked out the actuator on front diff and it was decently clean, nothing obviously broken
@@davidg.9478 i have a scissor lift in my garage and also just finished replacing rack and pinion, poly control arm(upper and lower) bushings, all ball joints, tierods, sway bar bushings, rotors, pads, brake hose, and New Bilstein front shocks.
I am Arabic and I do not speak English. So you can write what you did briefly please I can program it and thank you
Please Quickly
mb620532 eBay
Do you have a spreadsheet for the fault codes by anychance
Do you have a spreadsheet for the fault codes by anychance
Do you have a spreadsheet for the fault codes by anychance
There is a link in the video description. 👍