Great video!! Got some more understanding with my sled now.I have the same sled with the 10.4 secondary clutch with clutch kit and I’m having belt defection because the stock 026 belt is to tight and was told to get the 046 belt now. If you could help me out with this I would greatly appreciate it. Keep posting new videos!!! Very much helpful
You are correct on needing the #046 belt to go with the 10.4 secondary, also what clutch kit do you currently have on the sled? I will do a video explaining belt deflection and adjustment very soon.
Finally, a video that is easy to follow, nice job! Thanks for actually showing what you are doing and not the floor, best on you tube. What sealant did you use?
Heidi great vid kid keep on making vids only one on here that actually shows anything or video quality is decent do a video on servicing the clutch both pto and driven I’m also watching your power valve vid bought a f 7 well 2 f7 a diamond drive and a chain need Moore info thanks kid
Great video. Something that a lot of people are scared to perform, you just made look very easy. Did you find that your speed sensor was bad? If so, and you changed it, where did you find the part? Been looking all over and can't find anything other than knock-offs.
Yeah I couldn't find the oem part either, what I did was I found a treadmill speed sensor that fit, then I just cut the end off my stock one and spliced it onto the new treadmill speed sensor. The speed sensor is just a hall effect sensor. This is like the one I used. www.amazon.com/Treadmill-Reed-Switch-Replacement-NordicTrack/dp/B09T5W7R3N/ref=sr_1_5?crid=21ZA1PQOSP62D&keywords=treadmill+speed+sensor&qid=1673235646&s=sporting-goods&sprefix=treadmill+speed+sensor%2Csporting%2C173&sr=1-5
@@HeidisGarage great idea!! I'll give it a try. It fits perfectly into the recess in the diamond drive as well, or did you have to do some modification to the sensor end as well?
Thanks for the video! Literally walked me through the diamond drive removal so I could change speed sensor. Much appreciated
where did you find the replacement sensor?
Found at a dealership yet doesn’t deal with arctic cat anymore here in Syracuse NY. I believe the name is North Syracuse Lawn and Snow
@@robgronau315 unfortunately you may have gotten the last one!! I'm not far from Syracuse so I figured I'd give them a try, but they're out.
Thanks for making this video
Amsoil gearcase n chain oil is what you need to use
Great video!! Got some more understanding with my sled now.I have the same sled with the 10.4 secondary clutch with clutch kit and I’m having belt defection because the stock 026 belt is to tight and was told to get the 046 belt now. If you could help me out with this I would greatly appreciate it. Keep posting new videos!!! Very much helpful
You are correct on needing the #046 belt to go with the 10.4 secondary, also what clutch kit do you currently have on the sled? I will do a video explaining belt deflection and adjustment very soon.
Finally, a video that is easy to follow, nice job! Thanks for actually showing what you are doing and not the floor, best on you tube. What sealant did you use?
I used a silicon RTV sealant by Permatex, stuff works great and cures fast.
Usually put blue locktite on that shaft end to but up to the DD. Might check it if you've been running it.
Awesome video. Useful information and fun to watch. Subbed!
excellent video. Thanks!
Nice video and great job!!!!👍👍👍
Heidi great vid kid keep on making vids only one on here that actually shows anything or video quality is decent do a video on servicing the clutch both pto and driven I’m also watching your power valve vid bought a f 7 well 2 f7 a diamond drive and a chain need Moore info thanks kid
Thank you! Will do!
Awesome video
Thanks!
Very helpful definitely getting a Sub 👌
Use gear oil not motor oil, you need AW additives
Great video. Something that a lot of people are scared to perform, you just made look very easy. Did you find that your speed sensor was bad? If so, and you changed it, where did you find the part? Been looking all over and can't find anything other than knock-offs.
Yeah I couldn't find the oem part either, what I did was I found a treadmill speed sensor that fit, then I just cut the end off my stock one and spliced it onto the new treadmill speed sensor. The speed sensor is just a hall effect sensor.
This is like the one I used.
www.amazon.com/Treadmill-Reed-Switch-Replacement-NordicTrack/dp/B09T5W7R3N/ref=sr_1_5?crid=21ZA1PQOSP62D&keywords=treadmill+speed+sensor&qid=1673235646&s=sporting-goods&sprefix=treadmill+speed+sensor%2Csporting%2C173&sr=1-5
@@HeidisGarage great idea!! I'll give it a try. It fits perfectly into the recess in the diamond drive as well, or did you have to do some modification to the sensor end as well?
I think I had to sand a tiny bit off one side to get the Christmas tree clip to hold it in right. It was maybe a couple thousands off.
Did you drop the track also or no?
No, I didn't drop the track. The brake side was able to hold the cog and track up without issue.
Sled junkies clutch kit