Spur Z digital, Anlagenbau, Update bei der rechten Bahnhofseinfahrt
Вставка
- Опубліковано 6 лют 2025
- #hobbymodellbahn #train #hobbymodelleisenbahn #modeltrains #märklin #railway #modellbahn #trainspotting #modelleisenbahn #railroad #märklin #spurz #spurzdigital
Hier ein kleines Update bezüglich meiner Weichen bei der rechten Einfahrt in den Bahnhof
Email: rolfbeiyoutube@gmx.de
Danke für die Infos zu deiner Verkabelung, für mich noch ein großes Thema
Verkabelung war das ja eher weniger. Hier war es ja der Umbau der Weichen.
Zum Thema Verkabelung, schau dir mal dieses Video von mir an :)
ua-cam.com/video/Q25WHg-3PTc/v-deo.html
Schön das du deine Töchter mit einbeziehst 👍🏼 Und auch schön wie deine Anlage immer ein Stück weiter ausgebaut wird 👍🏼 Grüße
@@rauti73 Diesesmal war es ja ohne Tochter. 🤷♂️
Ich hoffe ich kann das mit den Weichen bald abschließen. Will mal weiter kommen
Hallo Rolf. I need some wire management under my table too. It gets real messy very quickly. Nice yard it will be very realistic when the time is right. I have a similar small tower also. There are many challenges to our hobby too. You have done very much of the fundamental work which is necessary to have a smooth and dependable layout. We don’t often recognize the hard work that goes in under the platform. Appreciate your hard work. Thank you. P.s. I can’t decide which of the new Marklin 2025 models I find interesting.
@@dwightlanden3335 thank you Dwight, hope you are well.
Yeah, wires becomes a nice job 🤪
Need more space for a bigger yard 😎
I got the tower from a club member. Put some LED inside and outside and placed it on the layout.
I know the hard work. Also my back knows it, trust me 😳😳😳
I ordered the blue diesel engine BR290 and the 111
Hi Rolf!: My congratulations!. Thanks for your explanation and videos.
@@xavicodina thank you!
You are welcome!
👋😊👍
@@laboite.a.z 👍
Der Erbauer hat ein Gesicht. eine tolle Z Bahn!
@@marderdax bin doch öfters zu sehen.
Danke!
@Mini-Club-Center-Siegen heute ist es mir aufgefallen, manchmal entfallen mir deine Videos
@ abonnieren und nichts mehr verpassen 🤪
Moin Rolf, sehr schön das es weitergeht. 😎👍
Am Anfang des Videos hättest aber nen Kaffee gebraucht. 🤣 Aber dann ging es ja. 😉
Warum hast Du Dich für diese Servos und nicht die MTB Weichenantriebe entschieden? Oder war es eine reine Kostenfrage, bei Deiner Masse an Weichen?
Ich habe die MTB und bin sehr zufrieden.
@@OVA_CC
Ich hatte mal Motorische Weichenantriebe von Conrad. Gefiel mir aber nicht. Servos sind feiner einzustellen.
🤔 Spur T = 1:480
@@Suesswasserrochen ?
Not to offend you, but replacing those Märklin switch drives with servos was complete waste of time and money. Good luck messing with that flimsy servo linkage. Huge strategic mistake.
@@tomsrensen9382 why? You should explain!
@@Mini-Club-Center-Siegen Right, Märklin did a fine job at designing a nice switch with a low-profile drive. You could dust it with an airbrush to blend in with your ballast for looks; you even made a video explaining the servo setup and why it took you so long. And there's cost; unless you can recover the expense of the servos by selling the original drives, I doubt it. Given the size of your layout, impressive indeed, staying with Marklin's drives would be a real timesaver at no extra cost.
@ for one point you are right. Save costs and time.
But I never ever have seen a layout with the Märklin drives looking good.
Even if you try to hide them. They are still there and looking ugly.
Of course the servos costs extra money. But you don’t see anything of them. And when one drive goes bad, you can change them easily. With the original drive you have to change the whole switch.
In my experience, nobody cares about switch drives when the trains run. I have no knowledge of the Z drive reliability. It's your layout, you're the boss, best of luck!
@ there are lot of people who looking not only for the trains.
The drives are ok, but I got a few broken, and then the change is the only way to fix it.