Decorative Double Wood Steel Gate | JIMBO'S GARAGE
Вставка
- Опубліковано 18 лип 2019
- I made this double wood decorative steel gate for a client and it turned out great! I was really excited about welding this gate together because I knew when it was finished that it would look amazing. Big gates are always impressive and the designer did a great job with this one.
Subscribe to Jimbos Garage: bit.ly/JimbosGarage
HTP: www.USAweld.com
Black Stallion Welding: amzn.to/2XJHBJV
MERCER INDUSTRIES: amzn.to/2UzqdWw
Grinding wheels I use: amzn.to/2PPdEpo
Buy a Jimbo's Garage T-Shirt here: www.jimbosgarage.com/shop
Camera I use: amzn.to/2CfEFOi
Follow Jimbo:
Facebook: / theofficialjimbosgarage
Twitter: / jimbosgarage
Instagram: / jimbosgarage
About Jimbo's Garage:
Jimbo's Garage is a channel to watch real metal, steel, welding and wood projects. - Навчання та стиль
Right on Jimbo! When I build mine I usually build my frame as one piece then cut them apart at the center. Nice to see other ways of doing it. Nice gate!
I started doing gates a year n a half ago and thank God for UA-cam, I watched a few of your videos and still to this day mount my wood into the gate as you do. A very smart way to build and especially for the homeowner's. Keep the videos coming...
Hey Henry, what type or kind of wood you used?
Jimbos Welding Toyland again, Thanks Jimbo.
That's an awesome gate, great attention to detail. Thanks for sharing
Jim, your designs are getting better the more you do. Nice gate and it really looks sharp. Keep them coming.
Классные видео!!! Отличный инструмент и руки золотые))
LOOKS BEAUTIFUL, AWESOME JOB!!!
You are amazing, one more time a beautiful job, congratulation!
You know your stuff, thanks for sharing your knowledge Sir.
Beautiful work, and so nice to have your friend around.
Best regards.
Looks GREAT!!!
Looks awesome Jimbo, great job! 😃👍🏻👊🏻
fantastic looking set of gates jimbo,can appreciate your work even more,when we can see fixed on site,its great to have a true friend like that............all the best................dougie
I need some one in Trinidad
Love that gate. Want to build one for my place in a couple yrs
Wow, that might be the most beautiful gate I've ever seen! And your craftmanship is amazing! Very inspiring, thanks for sharing!
First time I see one of your videos Jimbo, thanks for sharing your techniques. Great camera angles and really well explained! 😉
what a gorgeous stunning looking gate!!! love it!!! :)
Great job. Looks really good.
Looks beautiful
Great deal. Just right size for us. Wish we had bought one sooner.
Beautiful gate Jimbo, I'd love to have your skills. Keep up the great work my friend.
Awesome gate that you made got there idol jumbo'sGarage 👏👏👏👏👏
Glad to see those guys all wrapped up. I get nervous too with corner flex on big hanging pieces like this. Whenever I have some dead space in a sheet of steel on the plasma table I cut gussets from it, so I have a big pile of them to pick from to stiffen things up.
Better over built than re-built, eh?
Great work jimbo, you should do a video on installing these gates.
Hey Jimbo. Why is it none of those guys all loving your work don't ever bother to click LIKE? Your work is always perfect in so many ways. I guess I will continue to watch and wish. Thanks.
Great looking gate Jimbo, I really like the design and build! 👍👍
Holy moly you made that look easy.
Looks Great. I might have to build something like that for my house.
Love it, Very inspiring!
You're the man sir.
AWESOME! NICE LOOKING GATE..LOOKS VERY STURDY!
you make look so easy...thanks for sharing
Beautiful
Great gate, good skills.
Awesome work !
Awesome Job jumbo
Просто,отличная работа!!!
Very very nice indeed
Thanks jumbo awesome job
Beautiful Gates
Very good job, well done !
Super nice!!!👌👌👌👌.
This video should have 2k likes by now atleast
Damn! That's awesome!!!!!!
Beautiful Gates Jimbo
Great job awesome vid!
Great video. Thanks.
Nice, just a few months ago I built a gate almost the same except the arched top above. I've been looking for a video like yours for inspiration, but it's good to see it right now. I see you used argon, I used arc welding that makes life harder and I do not recommend. Greetings from Romanina and thanks for the video!
Wow i love how the gates looks and i love when you combain wood and steal design
Thanks for watching, Jimbo!
I have the sudden urge to go build an RV gate! LOL Great Video!
Beautiful gate, Jimbo.Well done. 👍🇺🇸
Thanks Chris, Jimbo!
Really nice Jimbo! I always liked the look of black steel and wood together. Great design.
Thanks Brian, Jimbo!
Nice job! I like the arch at the top.
You are the best! 👍👍👍
Your table is bad ass!
Great video. Nice gate!
love this gate. wish I could afford something like this
Great video. Gates came out awesome. Just hope no one parks too close to them.👍🏻
The gate is very pretty. Congratulations. Greetings from Poland
I love your jobs watching all time jumbo you good
Love the Swagoffroad table........nice.
If in the future can you show the install I would love to see that on the gates.
nice work!!
I'm a gate builder myself for about 10 years now. I can't stress enough to get away from those types of hinges. The way they are built they wear down. Please look at Barrel Pin hinges. They last 100x longer than normal/heavy door style hinges. The barrel pin hinges have a grease fitting for service. Not to mention they can handle the weight gain of the gate when the wood soaks up water from a nice rain. Great videos too!
Is a Barrel Pin hinge the same as a Bullet hinge? Can't find anything called a Barrel Pin?
Beautiful job going to make me one of these for my house
Nice looking gate.
very good, good job!
Nice!!!!
Great looking gate.
Thanks Wayward. Jimbo!
Good job and look nice.
I wish I lived in your neighborhood. I'd be that aggravating kid always hanging around. "Whatcha working on Mr. Jimbo ? Can I help ?"
MrTonythetiger91 🤣 me to!!!
Nice!
👏 awesome
Holy shit that gate GORGEOUS
and i love your welding table
Amazing work...ciao
DAM..Wow That Looks Super Bad Ass=Awsome..That Was Some Real Good Work Jimbo !
Great Job, love the design. I'm about to build a similar gate. What is the radius you had the top pieces rolled to?
That's a nice looking gate you talk about the 16gage I hate it I rather use 14 but sometimes I have to use it when I do I use 5/64 rods I get it at some welding supply stores home depot don't carry them I like the way you set the wood in pretty neat
Love your videos man, what is the ratio for the bending part of the fence? Thanks man!
Amazing work. How do we call the clamps being used plz and where did you get it from?
Nice door. Barell hinges are great too.King metal has lots of them. Luckily there is one 15 min from my house
As many gates as you do, get a roller. SWAG Off Road is the one I have and it works great and is not too expensive. Their dies are the cheapest of any and that's where the money gets expensive. I have several curved pieces I cut on the CNC plasma table that I use as a template guide when rolling the steel. That's the secret as you can easily tell when you've rolled it to just the right curve. Make several passes with the roller to get it to just the right curve. That way, the gate always ends up matching my drawing. I cut the templates from 10ga steel - about 36"x4" where one of the long sides is cut to the curve I need. I cut letters into the template indicating what radius they were made for. When I do gate tops, I often design them to fit one of the templates I already have cut. And BTW, nice work and what a clean and neat shop you have!
Great video man. Wanted to ask if you have a video of the actual hanging of the gate like when you welded the gate to the post.
Wow Jimbo
Nice project Jimbo. I want something like this at my house but about a 4 meter opening (13ish feet) with horizontal slats and just a plain old rectangle. Always a pleasure getting a jimbo vid popup. Have a good one mate!
Thanks for watching Troy, Jimbo!
Excellent work! Any idea what the radius of the bend in the tubing is? Enjoy the videos!!
What size steel square tubing is a good to use as a good rule of thumb? Is the .06 ok or to thin?
Great job!
Thanks for watching! There is a lot of good ones out there. I like HTP you can go to usaweld.com and check them out. Jimbo!
JIMBO'S GARAGE thanks Jimbo!!
I am completely impressed with the quality of each project!!
Nice beautiful art work,
What size length and thickness post you used to hold gate up
very nice
Awesome gate. What is the radius on the top pieces? Do you have a video of complete install of lock box, with knob and dead bolt? What needs to be done on receiving gate?
I had that problem
Nice gate bro
nice work
Nice👍
Да с таким оборудованием ,одно удовольствие работать
попробуй с нашими зп соруди такую мастерскую!)
You are work is owesam
Excellent work. What did you do for the strike plate for the locks?
好厲害
For me it Would complete the video to see the gate it “ in action “.
Aside from that very very nice looking .
Nice