Heat Weld Vinyl Installation. Best On Youtube.

Поділитися
Вставка
  • Опубліковано 27 лис 2024

КОМЕНТАРІ • 70

  • @MARKMANIATT
    @MARKMANIATT 3 місяці тому

    A superb explanation. Very well done and thanks👍

  • @tonyblake642
    @tonyblake642 Рік тому +8

    OMG having over 30 years experience laying floors this was hilarious.

    • @frnkrizo
      @frnkrizo  Рік тому

      Keep laying floors loser. I'm an aircraft mechanic. Video was for doing small seams under seats. Get off your knees, I know when I've been licked.

  • @AutomationDnD
    @AutomationDnD 5 років тому +4

    *THANK YOU* ... Great Video. Straight, Simple, & To-The Point
    No goofy music nor any extra chatter. Thanx Brother...................... *HavaGoodOne* !

  • @Timbolele
    @Timbolele 3 роки тому

    Great demo. Thanks!

  • @cory4152
    @cory4152 4 роки тому +4

    Love it great job! Try a strait edge to guide the groover it saves hours of trimming

  • @JOEMAMA-qe9wm
    @JOEMAMA-qe9wm 3 роки тому

    Love You video man. If you can show the knives a little better zoom in very slowly that would help

  • @SonsOfThunder229
    @SonsOfThunder229 8 років тому +5

    Thats just it, the best on youtube..

  • @richardmoss9188
    @richardmoss9188 3 роки тому +7

    This guy is clueless. You need a straight edge when grooving and the Mozart is the best tool for trimming off your weld. After your first pass the spacer spins round so you can do your final pass. You will get the weld flusher with the Mozart and are less likely to cut into the vinyl which you don’t won’t to do with a heterogenous vinyl like that one

    • @frnkrizo
      @frnkrizo  3 роки тому +5

      That is a Mozart knife and this is a simple demo. I have tons of tools and autogroovers and do gymnasiums. I have an autowelder I could have shown too asshole, but I doubt anyone has a $4000.00 autowelder to do their own welding. Your comment produced nothing positive. Think about that before you troll someone. By the way you got over a 100K on your heat weld video? Then STFU.

    • @jameshardiman5692
      @jameshardiman5692 3 роки тому +5

      Saying you own an auto welder has no relevance to anything Richard said. Also you’ve got 100k+ views, so now over 100k people don’t know how to weld correctly. Nice!

    • @richardmoss9188
      @richardmoss9188 3 роки тому +2

      @@frnkrizo I also have autogroovers and welders. That’s not the point though. All this guy had to do was use a straight edge while using his pull groover and use the Mozart for the final pass. Like you said it’s a simple demo and he didn’t get the basics right.

    • @frnkrizo
      @frnkrizo  3 роки тому

      @@jameshardiman5692 now 100k people know how to do a simple weld under an airplane seat. Make your own video asshat. So I can pick it apart. Or does the effort seem too much. Bitching at me is a lot easier. Fuck all

    • @bestdamflooringbestdamfloo5813
      @bestdamflooringbestdamfloo5813 3 роки тому +1

      Lmao

  • @allanpennington
    @allanpennington 4 роки тому

    450 def F is that suitable for 2mm thick Polyflor vinyl?

  • @tonycarubia9328
    @tonycarubia9328 2 роки тому

    This is a brutal seam, no good can never work for me with this qualification

    • @frnkrizo
      @frnkrizo  2 роки тому

      This was a simple demo video made for Aviation professionals so they could do a single small seam underneath a seat. I wouldn't work for your dumbass anyway I work in aviation m***********. I gave up carpet 15 years ago when I realized it's made to kill you. And if you're as old as me and still laying carpet and haven't figured out you need to get an education and get off your knees. You're dumber than that seam is garbage.

    • @frnkrizo
      @frnkrizo  2 роки тому

      Hey guess what I was watching your video and it didn't look any better. Oh wait you don't have any videos. So I'm going to leave these comments up here even though you tried to talk s*** about my seam. Since you felt like inserting yourself into something that's none of your business. You know like a troll.

  • @Dihat110
    @Dihat110 4 роки тому

    Nice I'm vinyl flooring Instolar

  • @fortunatus.rwabigene.4005
    @fortunatus.rwabigene.4005 Рік тому

    How much price?

  • @Mattyouyous
    @Mattyouyous 2 роки тому +1

    Imagine doing a 4 meter run or more doing this… hectic

  • @A3Kr0n
    @A3Kr0n 4 роки тому

    Well I'll be darned.

  • @reginakalalang4044
    @reginakalalang4044 4 роки тому

    hi sir..im fr philippines im having problems with the edges of my table ..can i put that on the edges ..between my laminates

  • @coolbreezeatp
    @coolbreezeatp 3 роки тому

    Great video, I had no idea.

  • @sueka2519
    @sueka2519 6 років тому

    Where can I buy or get the welding rod? Please let me know.

    • @frnkrizo
      @frnkrizo  6 років тому

      You need to get from the manufacturer of the vinyl. If you are trying to fix residential vinyl this is not the fix for you. The tools used in the video are around $1600.00.

    • @sueka2519
      @sueka2519 6 років тому

      I want to do residential work with this vinyl but the manufacturer won’t want to sale it to me unless I work in the file of commercial building like hospitals or school.
      I think is just very stupid. Even though I’m a contractor and I can’t get it. If you know where and how to purchase this material, please let me know.
      As far as the tools goes. I’m not worried about it. I can pretty much purchase these tools anywhere except the vinyl materials and heating welding rod. Please let me know.

    • @frnkrizo
      @frnkrizo  6 років тому

      I guess I never had to buy. It was always supplied and I was the install tech. I will try to find it for you as a consumer.

    • @sueka2519
      @sueka2519 6 років тому

      Thanks and I appreciated.

    • @Honkahonky
      @Honkahonky 5 років тому

      @@sueka2519 what color are you looking for?
      And also what kind of vinyl it's?

  • @johndouglas1978
    @johndouglas1978 6 років тому

    You do moonlighting mate ?

  • @ryanfindlay599
    @ryanfindlay599 2 роки тому

    Use a straight edge when gouging out the join ...............this is brutal to watch lol

    • @frnkrizo
      @frnkrizo  2 роки тому

      I watched your video. Brutal. I will tell you like everyone else. This was an instructional for aviation mechanics for doing seams under seats. No room for straight edge. Let's see your work soon. Thanks for adding to views and comments

    • @ryanfindlay599
      @ryanfindlay599 2 роки тому

      @@frnkrizo best place for your welds mate ,under a seat where no cunt will see them 👍🏻

    • @Christo777-77
      @Christo777-77 2 місяці тому

      If you have no room for a straight edgevthen you ain't getting a welder under there 😂

  • @saifalikhan6955
    @saifalikhan6955 2 роки тому

    Sir please is machine ke price

  • @athecal6878
    @athecal6878 3 роки тому

    Always cut toward your buddy and not your belly

    • @frnkrizo
      @frnkrizo  2 роки тому

      That's what they teach you when you're first learning. Control like knowledge comes with time.

  • @gladiator22666
    @gladiator22666 3 роки тому

    I stopped using a grooving tool years ago ......just leave a small gap in the vinyl. Works just fine 👍

    • @frnkrizo
      @frnkrizo  3 роки тому

      And provides more actual surface area bonding as well. I'm with you.

  • @Charliesdad98
    @Charliesdad98 2 роки тому

    Obviously never seen a Turbo groover

    • @frnkrizo
      @frnkrizo  2 роки тому

      This is a quick tutorial for airline mechanics to do short seams under seats. I have seen all the tools. this is just for very simple splices. your video was informative though.

  • @johndouglas1978
    @johndouglas1978 6 років тому +2

    Got a job in Blackburn could do with you on, hit me up

    • @frnkrizo
      @frnkrizo  6 років тому

      Indiana is where I hang my coat.

  • @Charliesdad98
    @Charliesdad98 2 роки тому +3

    That's pathetic you have no idea

    • @frnkrizo
      @frnkrizo  2 роки тому

      I tried watching your video on how to do it but you don't have any. This is a simple video for Aviation professionals to do a simple under the seat repair. There are many more tools there are many more techniques and there are many more things that I could have shown someone.

    • @frnkrizo
      @frnkrizo  2 роки тому

      Your comment produced nothing positive. Think about that before you troll someone. By the way you got over a 100K on your heat weld video? Then STFU.

  • @shotusingh9786
    @shotusingh9786 3 роки тому

    Hi

  • @kopynd1
    @kopynd1 3 роки тому

    a sold my liecester heat gun and bought the chinese 1 works ok no prob very cheap to buy

  • @chrissheehan7300
    @chrissheehan7300 3 роки тому +2

    Shocking 😂😂 you do not weld like that

    • @frnkrizo
      @frnkrizo  3 роки тому +1

      I tried watching your video on how to do it but you don't have any. This is a simple video for Aviation professionals to do a simple under the seat repair. There are many more tools there are many more techniques and there are many more things that I could have shown someone.

  • @raynatus6511
    @raynatus6511 Рік тому

    Such dir lieber ein anderes handwerk

  • @kopynd1
    @kopynd1 3 роки тому

    a bought 4 chinese made for price ov 1 and they do 110