I would never wear a half helmet that came from the NTSB and it was marked with percentages of where people have died from strikes two particular parts of the helmet. 90% were at the chin and around the face. I want to beat that possibility and can't understand why people wear a helmet that doesn't protect them. Thanks for comment.
This was a simple demo video made for Aviation professionals so they could do a single small seam underneath a seat. I wouldn't work for your dumbass anyway I work in aviation m***********. I gave up carpet 15 years ago when I realized it's made to kill you. And if you're as old as me and still laying carpet and haven't figured out you need to get an education and get off your knees. You're dumber than that seam is garbage.
Hey guess what I was watching your video and it didn't look any better. Oh wait you don't have any videos. So I'm going to leave these comments up here even though you tried to talk s*** about my seam. Since you felt like inserting yourself into something that's none of your business. You know like a troll.
If you go to the pet supply store get an iguana mat or a reptile heating mat they're supposed to go on the bottom of a fish tank when you have a snake or a reptile and it keeps the bottom of the fish tank warm. I took the mirror off and stuck it on the back of the mirror and I poked a hole in the drywall and ran that up to the light kit. So whenever the bathroom light is on the mirror is slightly warmer and it keeps the moisture from sticking to it I have been testing it for 18 years and it has yet to fail same Matt I stuck on there 18 years ago.
I started tinting in 1979 and have used many different types of film but this is a new one on me. I’ve been approached by several wanting this done but it’s been my experience that after several years and possibly the wrong chemical applied, it destroys the film. Would you please tell me your secret…. Thank You
I watched your video. Brutal. I will tell you like everyone else. This was an instructional for aviation mechanics for doing seams under seats. No room for straight edge. Let's see your work soon. Thanks for adding to views and comments
I tried watching your video on how to do it but you don't have any. This is a simple video for Aviation professionals to do a simple under the seat repair. There are many more tools there are many more techniques and there are many more things that I could have shown someone.
This is a quick tutorial for airline mechanics to do short seams under seats. I have seen all the tools. this is just for very simple splices. your video was informative though.
I tried watching your video on how to do it but you don't have any. This is a simple video for Aviation professionals to do a simple under the seat repair. There are many more tools there are many more techniques and there are many more things that I could have shown someone.
This guy is clueless. You need a straight edge when grooving and the Mozart is the best tool for trimming off your weld. After your first pass the spacer spins round so you can do your final pass. You will get the weld flusher with the Mozart and are less likely to cut into the vinyl which you don’t won’t to do with a heterogenous vinyl like that one
That is a Mozart knife and this is a simple demo. I have tons of tools and autogroovers and do gymnasiums. I have an autowelder I could have shown too asshole, but I doubt anyone has a $4000.00 autowelder to do their own welding. Your comment produced nothing positive. Think about that before you troll someone. By the way you got over a 100K on your heat weld video? Then STFU.
Saying you own an auto welder has no relevance to anything Richard said. Also you’ve got 100k+ views, so now over 100k people don’t know how to weld correctly. Nice!
@@frnkrizo I also have autogroovers and welders. That’s not the point though. All this guy had to do was use a straight edge while using his pull groover and use the Mozart for the final pass. Like you said it’s a simple demo and he didn’t get the basics right.
@@jameshardiman5692 now 100k people know how to do a simple weld under an airplane seat. Make your own video asshat. So I can pick it apart. Or does the effort seem too much. Bitching at me is a lot easier. Fuck all
A superb explanation. Very well done and thanks👍
gopro
epik
Idk what this is, but Dayum awesome!!!
I love that sound
Am I the only one who thought it was getting ready to shot a laser at that circular looking object way ova yonder lol I guess
What is this
Rolls-Royce 250 turbine engine. It's the engine that you would find on like a news helicopter
Anakin checking his pods’ engines.
Turbine Engine Spin Up
How much price?
Such dir lieber ein anderes handwerk
Now imagine all those people you see in half helmets with this same scenario.
I would never wear a half helmet that came from the NTSB and it was marked with percentages of where people have died from strikes two particular parts of the helmet. 90% were at the chin and around the face. I want to beat that possibility and can't understand why people wear a helmet that doesn't protect them. Thanks for comment.
That had to be scary.
OMG having over 30 years experience laying floors this was hilarious.
Keep laying floors loser. I'm an aircraft mechanic. Video was for doing small seams under seats. Get off your knees, I know when I've been licked.
I’m so happy for Samantha.
This is a brutal seam, no good can never work for me with this qualification
This was a simple demo video made for Aviation professionals so they could do a single small seam underneath a seat. I wouldn't work for your dumbass anyway I work in aviation m***********. I gave up carpet 15 years ago when I realized it's made to kill you. And if you're as old as me and still laying carpet and haven't figured out you need to get an education and get off your knees. You're dumber than that seam is garbage.
Hey guess what I was watching your video and it didn't look any better. Oh wait you don't have any videos. So I'm going to leave these comments up here even though you tried to talk s*** about my seam. Since you felt like inserting yourself into something that's none of your business. You know like a troll.
Secret plz
If you go to the pet supply store get an iguana mat or a reptile heating mat they're supposed to go on the bottom of a fish tank when you have a snake or a reptile and it keeps the bottom of the fish tank warm. I took the mirror off and stuck it on the back of the mirror and I poked a hole in the drywall and ran that up to the light kit. So whenever the bathroom light is on the mirror is slightly warmer and it keeps the moisture from sticking to it I have been testing it for 18 years and it has yet to fail same Matt I stuck on there 18 years ago.
I started tinting in 1979 and have used many different types of film but this is a new one on me. I’ve been approached by several wanting this done but it’s been my experience that after several years and possibly the wrong chemical applied, it destroys the film. Would you please tell me your secret…. Thank You
There is a reptile heating mat stuck to the back of the mirror that is wired to the light kit above.
Get it Pops 💃🕺
Thanks.
Having fun with the Family that's the way to do it.
You bring back memories with that dance. Long live the Mighty Mighty Bosstones!
❤
Use a straight edge when gouging out the join ...............this is brutal to watch lol
I watched your video. Brutal. I will tell you like everyone else. This was an instructional for aviation mechanics for doing seams under seats. No room for straight edge. Let's see your work soon. Thanks for adding to views and comments
@@frnkrizo best place for your welds mate ,under a seat where no cunt will see them 👍🏻
If you have no room for a straight edgevthen you ain't getting a welder under there 😂
That's pathetic you have no idea
I tried watching your video on how to do it but you don't have any. This is a simple video for Aviation professionals to do a simple under the seat repair. There are many more tools there are many more techniques and there are many more things that I could have shown someone.
Your comment produced nothing positive. Think about that before you troll someone. By the way you got over a 100K on your heat weld video? Then STFU.
Obviously never seen a Turbo groover
This is a quick tutorial for airline mechanics to do short seams under seats. I have seen all the tools. this is just for very simple splices. your video was informative though.
What a hack use a straight edge apprentice
After seeing how you respond to critics, I'll just say that you're not a good professional at best. Too many dumbass mistakes to mention! 🤣
Sir please is machine ke price
Imagine doing a 4 meter run or more doing this… hectic
Great demo. Thanks!
Shocking 😂😂 you do not weld like that
I tried watching your video on how to do it but you don't have any. This is a simple video for Aviation professionals to do a simple under the seat repair. There are many more tools there are many more techniques and there are many more things that I could have shown someone.
Always cut toward your buddy and not your belly
That's what they teach you when you're first learning. Control like knowledge comes with time.
He did not do the fire detection test before he started the APU.
Yes he did
Yes, he did @0:27 sec into the video.
Great video, I had no idea.
Love You video man. If you can show the knives a little better zoom in very slowly that would help
Amazing video
UA-cam keeps recommeding me videos of thrust reversers
This guy is clueless. You need a straight edge when grooving and the Mozart is the best tool for trimming off your weld. After your first pass the spacer spins round so you can do your final pass. You will get the weld flusher with the Mozart and are less likely to cut into the vinyl which you don’t won’t to do with a heterogenous vinyl like that one
That is a Mozart knife and this is a simple demo. I have tons of tools and autogroovers and do gymnasiums. I have an autowelder I could have shown too asshole, but I doubt anyone has a $4000.00 autowelder to do their own welding. Your comment produced nothing positive. Think about that before you troll someone. By the way you got over a 100K on your heat weld video? Then STFU.
Saying you own an auto welder has no relevance to anything Richard said. Also you’ve got 100k+ views, so now over 100k people don’t know how to weld correctly. Nice!
@@frnkrizo I also have autogroovers and welders. That’s not the point though. All this guy had to do was use a straight edge while using his pull groover and use the Mozart for the final pass. Like you said it’s a simple demo and he didn’t get the basics right.
@@jameshardiman5692 now 100k people know how to do a simple weld under an airplane seat. Make your own video asshat. So I can pick it apart. Or does the effort seem too much. Bitching at me is a lot easier. Fuck all
Lmao
I stopped using a grooving tool years ago ......just leave a small gap in the vinyl. Works just fine 👍
And provides more actual surface area bonding as well. I'm with you.
I miss this airplane.
What? It’s still used commonly around the world. You can’t miss it if it’s still there....
@@kurtsvensson4362 I used to fly it. I fly another now.
@@paulnobleii4239 May I ask what airline you flew for?
@@kurtsvensson4362 I flew for Mesa.
a bought 4 chinese made for price ov 1 and they do 110
Where?
a sold my liecester heat gun and bought the chinese 1 works ok no prob very cheap to buy
Hi
Nice I'm vinyl flooring Instolar
Cowboys and HipHop. I’ve seen it all now.
Love it great job! Try a strait edge to guide the groover it saves hours of trimming
говно
450 def F is that suitable for 2mm thick Polyflor vinyl?
hi sir..im fr philippines im having problems with the edges of my table ..can i put that on the edges ..between my laminates
No
use silicone same colour as laminate
Well I'll be darned.
Very educational