How to Replace Engine Water Pump 2008-2012 Honda Accord

Buy Now!
New Engine Water Pump from 1AAuto.com trq.video/ia-1...
This video shows you how to install an engine water pump on your 2008-2012 Honda Accord. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This repair was done on a 2010 Honda Accord LX-S 2.4L Coupe 2-Door FWD Manual and the process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord
Tools you will need:
• 10mm Wrench trq.video/oa6-...
• 14mm Wrench trq.video/oa6-...
• 12mm Socket trq.video/oeQ-...
• 14mm Socket trq.video/oeQ-...
• 19mm Socket
• Trim Tool Set trq.video/obt-...
• 1/4 Inch Ratchet trq.video/oed-...
• 3/8 Inch Drive Ratchet trq.video/oeQ-...
• Torque Wrench trq.video/ocP-...
• Gloves trq.video/oY-1...
• Safety Glasses
• Drain Pan
• Funnel
Subscribe: / @trq
Check out our playlist:
Honda Accord 2008-12 8th Gen: • Honda Accord 2008-12 8...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@taurobolo]

Nice work, Sr. You saved a lot of money 💰.

[@4morrone]

Can this be done on jack stands or does car need to be raised.

[@SlametRiyadi-jm3sm]

Really great video sir 👍👍👍

[@williewest-ny9gk]

the guy did a great job he will improve on editing skills hes a mechanic not a movir director for heaven sakes movie critic

[@patrykhillard2837]

What tool is that for the plastic pins and where did you get it?

[@danjones3402]

How many miles when replaced?

[@RedMohawk95]

Those are two step tabs use a screw driver flat head to get insert out then button will come out

[@dougB4454]

This guy is good. I would be dropping bolts all over the place. The 8 pounds of torque surprised me. Not very tight at all.

[@TRQ]

+@dougB4454 Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@DEADIKATED]

If the leak is behind the Thermostat would it be the water pump that needs to be replaced or the water passage housing?

[@JAVIERMARTINEZ-pn7nm]

You need to comepletely drain coolant in order to change water pump?

[@williewest-ny9gk]

raise car on jack stand so remove tire for easy access

[@user-oz3bu3qz5t]

Is this the same for an 08 crv??

[@TRQ]

+@user-oz3bu3qz5t The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ

[@costalamb3065]

Dude, You taking way too long on those clips at the beginning. Just stick a blade screwdriver in their slots and pop them up.

[@tamikatripp6516]

Some things could have been edited. It's taking too long to take the stuff off

[@gaskinsgarage4192]

How hard is it to put that this is a 4 cly my god

[@aamirshahzad8012]

،🤔🤔🤔

[@williewest-ny9gk]

yeah because you removed the tire for easy access

[@TheplusSizequeen]

So is there a timing belt on this car?