We must execute pull-off tests on a vertical surface, so we must paste the aluminum dolly on the wall. We are thinking about a two-component epoxy glue that hardens quickly (4-5 hours). Could you recommend us some good products for the concrete surface? I hope you can help us with this problem.
Hi, We supply 2-pack epoxy araldite with the gauge, however it may not be suitable for every application. We would recommend you speak with a technical representative of your local glue manufacturer. If you have any more questions, please get in touch at support@elcometer.com
![Pull-off adhesion ASTM D4541 [Paint Testing]](/img/n.gif)
However much time should i mix the glue
Hi,
The glue should be mixed until all the glue becomes one uniform colour. The curing time should then be 24 hours.
We must execute pull-off tests on a vertical surface, so we must paste the aluminum dolly on the wall. We are thinking about a two-component epoxy glue that hardens quickly (4-5 hours). Could you recommend us some good products for the concrete surface?
I hope you can help us with this problem.
Hi,
We supply 2-pack epoxy araldite with the gauge, however it may not be suitable for every application. We would recommend you speak with a technical representative of your local glue manufacturer.
If you have any more questions, please get in touch at support@elcometer.com