Bosch Nexxt DLX dryer Electric stops after 5 min, won't restart for 30 min or more, Lint Filter ligh
Вставка
- Опубліковано 22 тра 2023
- 16 year old system, first problem. unit would run for a few minutes then stop and flash lint filter. This unit will flash lint filter at the end of every load as a factory setting. Was hard to troubleshoot. ended up testing all sensors, they tested good on ohms meter but I replaced them all. That didn't fix it. I tested the door switch and got funny readings after it got hot. door switch would get hot and fail making the computer think the door was opened. I used a jumper wire to make the make the machine think the door was closed and it ran several loads without problem. Super simple fix...replace door switch
Thanks so much for posting this video. Ordered the switch and installed. Works great!!
Having the same problem dismantled everything and this is awfully similar to my case... Thanks for posting this. For the record, it was trouble-free for 19 years, since I got it in 2005.
I shot some aerospace contact cleaner (it basically doesn't harm anything expect the person spraying it) and will cross my fingers that that was the problem. A test run seems to indicate that the problem is solved. I did clean the lint in the lint box, but I had already vacuumed most of it in the previous days so I figure that wasn't it. I'll try to remember to post a follow-up in the next week or so.
Preciate ya… having same problem after I just replaced heater element. Shop vac Ed all the lint out of bottom and still flashing lint. Going to try this