Speaker manufacture LINE ARRAY PRO - AUDIO

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 980

  • @rajkapoor6109
    @rajkapoor6109 4 роки тому +4

    Bahut achi lagi aapki video bhai and nice work

  • @brawlstartheclubtv311
    @brawlstartheclubtv311 4 роки тому +9

    Good project Brazilian here like video

  • @DrBoobY2K
    @DrBoobY2K 3 роки тому +5

    I'd say that though it all looks a bit rough and ready, judge them by how precise they are with their tools, not how precise it LOOKS like they are. These guys have done this, many many many times and it shows. I am a cabinet and kitchen builder and I was thinking about making some ply cabinets for a hobby, and I was shocked at first, then amazed by the precision these guys have with simple tools, practice and dexterity. At 6:57 I rewound it many times to see if he had a jig to make it that precise, but no, he does that freehand. Mental.

    • @coski87
      @coski87 2 роки тому +5

      Yes, he does have a gig, it's underneath the board he's cutting, the router has an arm that follows the shape

  • @djedbrasil9019
    @djedbrasil9019 4 роки тому +15

    Parabéns pelo excelente trabalho... ficou maravilhoso!!!!

  • @djbhe
    @djbhe 4 роки тому +25

    This is cool! I have some custom hand made speakers that was made 27 years ago and they still sound great better than anything you can buy from a store. Mine are 18" Woofers, Midrange Horn & Tweeters.
    The only thing I had to replace was the Midrange in 27 years. A friend of mine built them for me. I treated the wood with polyurethane with about five coats to bring the details of the wood out.

  • @AdilShahzad
    @AdilShahzad 4 роки тому

    I like ❤❤❤❤❤ your Idea... and nice good job.

  • @isoguy.
    @isoguy. 4 роки тому +6

    Just enjoy the attention to safety in these businesses.

    • @isoguy.
      @isoguy. 4 роки тому

      @João Maverick yes, occupational health Safetey does not seem to be a priority.
      However, life appears to be cheap in many eastern countries.

    • @scottxfactoraudio8799
      @scottxfactoraudio8799 4 роки тому

      The "I" in ISO means international??!!?! Then what does it mean at my local IHOP???? Or any IHOP?? It cannot mean the same. I have traveled to 49 different countries in my lifetime. And the US of A, is the ONLY country on this planet with IHOP's. Therefore......

  • @FUSIONGRUPERAOFICIAL
    @FUSIONGRUPERAOFICIAL Рік тому +1

    Hola, alguien sabe que relación hay en ahorro con respecto a una caja de fábrica? Vale la pena hacerlas DIY? Saludos 👋🏼

  • @derofromdown-under2832
    @derofromdown-under2832 4 роки тому +8

    An excellent presentation Mr.E... WELL DONE!!! Nice to see how precise those guys are with the making of those speaker cabinets... 10/10

  • @pachorubio8737
    @pachorubio8737 4 роки тому +1

    Respect from Indonesia 🇲🇨. Sound System Malang East Java

  • @subramaniamchandrasekar1397
    @subramaniamchandrasekar1397 4 роки тому +3

    Two men army. Working for their livelihood. Don't complain their hard work just because you have seen automated manufacturing in UA-cam channels. All the best.

  • @kienlu1854
    @kienlu1854 4 роки тому

    Người Việt Nam làm kênh này nếu như không lầm kkk, content này hay đấy b

  • @psementalist
    @psementalist 4 роки тому +6

    Absolutely amazingly breathtakingly stunningly beautiful 👍👍

  • @rxk8195
    @rxk8195 3 роки тому +2

    Ciri khas indonesia,,kerja tanpa sarung tangan.

  • @5centsBack
    @5centsBack 4 роки тому +11

    A manufacturer showing how he scratches metal surfaces and stripping screws... Just wow..

  • @sarahhmaitsya7823
    @sarahhmaitsya7823 2 роки тому

    mantap bos aku suka cara kerja nya rapih banget

  • @piragna6483
    @piragna6483 4 роки тому +3

    PERFECTO!!! UN TRABAJO DE PRIMER NIVEL! GRACIAS POR EL VÍDEO! SALUDOS DESDE ARGENTINA

  • @uki1252
    @uki1252 3 роки тому +1

    God job
    -from indonesia

  • @soundguymatt
    @soundguymatt 4 роки тому +6

    If you want to save money, a good alternative to Durex coating is first spray your primer coat then take some thin rubber strips and throw it in a blender. Mix the rubber grains in black paint then..ta da you have poor man's Durex. Playground sand works too but then you end up with sandpaper cabinets that scuff everything you come in contact with ,like vehicle doors ect.

    • @cukurboss9492
      @cukurboss9492 3 роки тому

      o.

    • @marcoty6312
      @marcoty6312 3 роки тому

      I know Im asking randomly but does anyone know a method to get back into an Instagram account?
      I stupidly lost my password. I would appreciate any tips you can offer me!

    • @brookssalvador7888
      @brookssalvador7888 3 роки тому

      @Marco Ty Instablaster ;)

    • @marcoty6312
      @marcoty6312 3 роки тому

      @Brooks Salvador thanks so much for your reply. I found the site through google and I'm in the hacking process atm.
      Takes quite some time so I will get back to you later when my account password hopefully is recovered.

    • @marcoty6312
      @marcoty6312 3 роки тому

      @Brooks Salvador It worked and I actually got access to my account again. Im so happy:D
      Thank you so much you saved my ass :D

  • @mikkosallinen2376
    @mikkosallinen2376 2 роки тому

    Yes...all elements are gold and driver was gold too.those came loud and sound is gold.i live pa

  • @Simegaudio
    @Simegaudio 4 роки тому +18

    Hello I'm form Indonesia 🇮🇩

    • @MrElectricity1111
      @MrElectricity1111  4 роки тому +5

      Hi

    • @Simegaudio
      @Simegaudio 4 роки тому +1

      @@MrElectricity1111 hi too

    • @pachorubio8737
      @pachorubio8737 4 роки тому +2

      @@MrElectricity1111 Respect From 🇲🇨. Sound System Malang East Java

    • @pachorubio8737
      @pachorubio8737 4 роки тому +2

      @@Simegaudio Daerah Mana

    • @AksaTV
      @AksaTV 4 роки тому +2

      aku solo cak... ki sing gawe po yo wong indo? kok suorone koyo wong jowo

  • @DjsoundPro94
    @DjsoundPro94 6 місяців тому

    Excelente trabajo 👌

  • @technic550
    @technic550 4 роки тому +16

    Every time a screw head slips an angel dies. carnage!

  • @user-hm2nj7qf3
    @user-hm2nj7qf3 2 роки тому

    Nice job 👌👍🔥👌👍 good job 👍💯

  • @boryssoundmusic6268
    @boryssoundmusic6268 4 роки тому +10

    Teve uma vacilada, Colocar o dividor de frequencia na lã de vidro! o Resto ficou muito bom

  • @nihalindustrialworks2205
    @nihalindustrialworks2205 2 роки тому

    It is wonderful job and presentation .good luck

  • @romildosilva8971
    @romildosilva8971 3 роки тому +4

    Qualidade de áudio excelente, serviço maravilhoso

  • @thuyxinh7793
    @thuyxinh7793 4 роки тому +1

    chúc các ah thanh công

  • @alcenioalcenio4635
    @alcenioalcenio4635 3 роки тому +5

    Hola, me pareció muy interesante la elaboración del cajón.
    Quisiera mayores detalles del mismo, como las dimensiones, donde puedo adquirir los soportes de metal, las agarraderas y la base para colocar los conectores de entrada, ya que en país me es defisil
    Conseguir.

  • @hasanuddinlalot4363
    @hasanuddinlalot4363 3 роки тому

    Selamat berkarya dan sukses tentunya 👍👍🙏

    • @AungKyaw-w1q
      @AungKyaw-w1q 3 місяці тому

      ဘောက်လုပ်တဲ့စက်ရုံမှာအလုပ်လုပ်ချင်တယ်

  • @vestaxpmc17
    @vestaxpmc17 4 роки тому +11

    Awesome video. Just a couple of nitpicking things: 1. The shop looks like it's a mess. Trash everywhere, especially outside. And in the background you can see lots of half-finished/ disassembled speakers. What's up with that? and 2. It looks like the input plate was installed upside down. With any speaker, and especially line arrays, you want to the cables to be going UP into the box and not down. This is important for water run off etc.. for outdoor shows. 3. I didn't see any "loctite" in the video. Some of those bolts on the rigging hardware were hand-tightened, which wouldn't be a big deal if you used some type thread locker like "loctite" or some generic brand. Safety is #1. But overall, great video!

    • @petersams5054
      @petersams5054 3 роки тому +1

      There was a BUNCH of sketchy stuff: watching the drill slip and mark the sides of the grill. The wiring putting pins 1+ & 2+ together?! Really? Not a great cabinet finish, needs a much better coat, that will scuff off quickly. Line array horn has to be the full height of the cab to couple with the cabs on either side otherwise comb filtering. And then there's no ventilation in the shop, tools from 1960, just basic homemade speakers.

  • @vijaykumar-np8qq
    @vijaykumar-np8qq 4 роки тому

    Hii I am from India ...nice creation ..looking good

  • @watch8821
    @watch8821 4 роки тому +10

    nice speaker,but nextime use a proper sound system to test your speaker, good job bro,,,,

  • @vijaykumarvishwakarma6999
    @vijaykumarvishwakarma6999 4 роки тому

    Excellent work no-1

  • @wellingthonmelo4959
    @wellingthonmelo4959 3 роки тому +3

    Parabéns .... Muito bem feita .

    • @Дарий-б7о
      @Дарий-б7о 2 роки тому

      БОЛЕЕ ПАРШИВОЙ СБОРКИ Я НЕ ВИДЕЛ ЕЩЁ КРУЧЕ ПОКРАСКА...

  • @nicopesil
    @nicopesil 4 роки тому +1

    ESPECTACULAR!!!! Very NICE Job

  • @SuryaDi-hu7tj
    @SuryaDi-hu7tj 4 роки тому +4

    Is Good👍

  • @acecraige6419
    @acecraige6419 2 роки тому +2

    So ,Nice ,Projec

  • @wellingtonsabino7889
    @wellingtonsabino7889 4 роки тому +10

    Wow, what a service pork. In addition to being dirty, you buy the scratched product.
    We will learn to work more carefully

  • @fullswing9309
    @fullswing9309 4 роки тому +2

    superb...boom!!!👌👍🇲🇾

  • @dariovette9351
    @dariovette9351 4 роки тому +9

    If they clean the protective grills before putting them on, they would look better.

  • @robertw.1499
    @robertw.1499 2 роки тому

    These speakers aren’t inexpensive. Am amazed at the very basic (but effective) manufacturing process. Good for those in the western world that sell such products that Labour is cheap in Asia

  • @RTBNL
    @RTBNL 4 роки тому +5

    Is the orientation of that horn correct? Mounted in an array the sound will be mostly spread up and down instead of left and right.

  • @jesusvelasquez6327
    @jesusvelasquez6327 2 роки тому

    Excelente trabajo! exitos!!!

  • @Vincent-Vega24
    @Vincent-Vega24 4 роки тому +22

    Guys, cut them some slack Geez!!!! At least they are doing something instead of robbing or begging!!!!

  • @Henrique3541
    @Henrique3541 4 роки тому

    Excellent...!!! 👌👌👌🥇🙏

  • @angelobarz8658
    @angelobarz8658 4 роки тому +4

    20:40 .... Oh scratch... Daaaaaammmmmmmnnnnn

  • @rociov11000
    @rociov11000 3 роки тому +1

    Excelente trabajo y maravilloso sonido, felicitaciones. saludos desde Chile.

  • @thinwood
    @thinwood 4 роки тому +14

    The finishing quality is very poor.
    Some of the screws were crushed when I hit them.
    There's a scratch on the screw, and there's a wooden case, and there's a scratch on it.
    The finishing quality looks terrible.

    • @rpgggjdmsmkw8
      @rpgggjdmsmkw8 4 роки тому +2

      arte mo

    • @Meowingtiger
      @Meowingtiger 4 роки тому

      Its ment for hard use being moved around a lot. It will be full of scratches after the first few jobs.

  • @quangpham5356
    @quangpham5356 4 роки тому

    Thay hay thiet cam on nhieu

  • @djsilviojalesJales
    @djsilviojalesJales 4 роки тому +3

    Muito bom amigo .quanto custou cada caixa?

  • @tomiemadeja4065
    @tomiemadeja4065 3 роки тому

    astig w0w gnda ng pag, kagawa nio poh sir,, 👍👍👍

  • @gangomalek5326
    @gangomalek5326 4 роки тому +7

    What do they paint from the spray gun? What kind of coverage?

    • @anggapradana9470
      @anggapradana9470 4 роки тому

      Orange peel texture paint.

    • @samak12
      @samak12 4 роки тому

      Duratex

    • @adrianmartinez021319
      @adrianmartinez021319 4 роки тому

      What can a gun u used regular paint car gun?? Causs i have cuple buy i ready tey qnd the texture not coming out never its to heave i used duratext

  • @KELOPCHANNEL
    @KELOPCHANNEL 4 роки тому

    From indonesia☝

  • @แบ็งค์วงสุนทร

    ใบเท่าไรครับชอบๆๆๆๆ

  • @parmjitsingh5411
    @parmjitsingh5411 4 роки тому

    verry verry ultimate video cong. sir

  • @dabeefemus
    @dabeefemus 4 роки тому +12

    I built speakers professionally for years. I would not have accepted that as "Pro Audio" level of quality on the cabinets or the design. Ports are not tuned, no wave guide, two way only....scale of 5 I give them a 3.5

    • @rossstoner1345
      @rossstoner1345 4 роки тому

      did you catch the boat prop in the background? I wouldn't consider these guys pro either ;)

    • @scottxfactoraudio8799
      @scottxfactoraudio8799 4 роки тому +1

      Ha ha ha, On a scale of 1/100? I'll give them a "-13". The HVAC guy called. He wants his filter covers back they stole off of his AC units! Those Line-arrays? Are that in name only. It's an "array", alright. An array of what? I don't think that we'll ever really know.......

    • @angngocson9471
      @angngocson9471 2 роки тому

      It's just a Vietnamese workshop, they just copy the design of China speaker, then their products not the best one.

    • @angngocson9471
      @angngocson9471 2 роки тому

      @@scottxfactoraudio8799 is Just a Vietnam workshop, they don't enough tools and knowledge to make a professional one!

  • @badbloodgamer2280
    @badbloodgamer2280 2 роки тому

    Beautiful Work

  • @bolsonaro2230
    @bolsonaro2230 4 роки тому +3

    Tem como me passar as medidas dessas caixas de son pra mim por favor esse eo meu fece (elielson silva) manda la so maior fã de caixas de son curto muito ...

  • @cristianvelasquez7978
    @cristianvelasquez7978 2 роки тому

    Una maravilla 👌🏼👌🏼👌🏼👌🏼👌🏼

  • @russian9134
    @russian9134 4 роки тому +18

    Товарного вида нет,как будто им 20 лет

    • @sergiik1580
      @sergiik1580 4 роки тому +1

      Ахаха втащил шуруповертом по боковухе, оставил борозду и даже не вздрогнул. Норм так сойдет, manufacture в гараже ахаха.

  • @kudakwashechatyoka1185
    @kudakwashechatyoka1185 3 роки тому

    wakaipa, you are great

  • @jimt5683
    @jimt5683 4 роки тому +6

    Dam that polyfill going to catch on fire

  • @plusminuschanel5077
    @plusminuschanel5077 4 роки тому

    Hello I'm from Indonesia🇮🇩
    Good video👍

  • @Philipov86
    @Philipov86 4 роки тому +7

    Динамики норм, а корпуса не очем.

    • @vovan8547
      @vovan8547 4 роки тому +2

      Морда колонки в стиле кондиционера "электроника БК 1500"

    • @КонстантинСтальной-я2х
      @КонстантинСтальной-я2х 4 роки тому

      Акустическое оформление - "Ящик с дЫрками"" ?? Для пляжа наверно ....

  • @แบ็งค์วงสุนทร

    สวยงามมาก

  • @vladtepes2437
    @vladtepes2437 4 роки тому +12

    If the speakers perform just like "the high quality finish", I'm afraid I'll have to say " pass" to these. I can see it's a long, hard and detailed work but, judging by the way these guys are handling their " instruments", that is a "no-no".

    • @lollol-hk6fv
      @lollol-hk6fv 4 роки тому +1

      These are how most top end line array and speaker boxes are made. U just don't see how they're made. It is quite a bit less professional than this

    • @DrBoobY2K
      @DrBoobY2K 3 роки тому +1

      I'd say that though it all looks a bit rough and ready, judge them by how precise they are with their tools, not how precise it LOOKS like they are. These guys have done this, many many many times and it shows. I am a cabinet and kitchen builder and I was thinking about making some ply cabinets for a hobby, and I was shocked at first, then amazed by the precision these guys have with simple tools, practice and dexterity. At 6:57 I rewound it many times to see if he had a jig to make it that precise, but no, he does that freehand. Mental.

  • @verdydwisaputra2173
    @verdydwisaputra2173 4 роки тому

    Sangat bagus good job salam dari Indonesia sound system' culture

  • @djdom1702
    @djdom1702 4 роки тому +5

    So what kind of metal parts are these connectors

    • @TempoDrift1480
      @TempoDrift1480 3 роки тому +1

      They're fucking metal parts. What other kind of metal parts are there? Horse hair metal parts? Saltwater metal parts?

    • @gideonpeprah
      @gideonpeprah 3 роки тому

      @@TempoDrift1480 salvage reply

  • @bassaddict5436
    @bassaddict5436 4 роки тому +1

    Great build 👏

  • @poserwanabe
    @poserwanabe 4 роки тому +7

    the lesson to be learned here is don't bite your fingernails....

  • @AudioTekAdventures-ph9ke
    @AudioTekAdventures-ph9ke 11 місяців тому

    Nice! and well done:)

  • @muluhsenet7582
    @muluhsenet7582 4 роки тому +8

    Sir please I'm from Cameroon a high school student please I wish could teach me sir

  • @pinka_jhajj
    @pinka_jhajj 2 роки тому

    Fire 🔥🥳🔥

  • @betosky7542
    @betosky7542 4 роки тому +4

    Price ??

  • @carlosalbertovandevelde2144
    @carlosalbertovandevelde2144 2 роки тому

    Exelente!! 💪💪

  • @dmitrykolevatih4692
    @dmitrykolevatih4692 4 роки тому +11

    20:42 dislike (((((((((((((((((((

    • @kokeman3557
      @kokeman3557 4 роки тому

      @Jerk Of All Trades 😛😛😛🤣🤣🤣🤣🤣🤣🤣🤣

  • @djclassy7908
    @djclassy7908 4 роки тому +2

    I’d like to see the speakers arranged in a LINE-ARRAY. These just look like typical high-end PA Speakers 🙏🏻

  • @crispyridervlogs3320
    @crispyridervlogs3320 4 роки тому +3

    can i have a copy of the speaker box plan?

  • @sundayorquest5329
    @sundayorquest5329 4 роки тому

    saludos de desde venezuela

  • @tootall5559
    @tootall5559 4 роки тому +6

    oh I've seen these guys before. They know absolutely nothing about speaker design. Hell, I know more than they do and what I know is a drop in the bucket.

  • @juaquingutierrez8257
    @juaquingutierrez8257 4 роки тому +1

    Mucha dedicación se nota la Calidad EXPECTACULAR

  • @magamamaev9467
    @magamamaev9467 4 роки тому +5

    колхозная работа. вес в царапинах ))))

  • @lavery32
    @lavery32 3 роки тому

    Great looking speakers, even though the paint prep and finishing aggravated my OCD lol.

  • @royk007
    @royk007 4 роки тому +4

    Custom made sh!t speakers.......

    • @syaz4380
      @syaz4380 3 роки тому

      i mean the cab looks good enough

  • @hectorortega9131
    @hectorortega9131 4 роки тому

    Great Job! I like your Table Saw Jig you made too!. 👍👍

  • @nguyenthao-7873
    @nguyenthao-7873 Рік тому

    Việt Nam mãi đỉnh

  • @WKProduction365
    @WKProduction365 3 роки тому

    WOW!!! 😱😱

  • @ericmjumi6043
    @ericmjumi6043 2 роки тому

    Amazing work…. !!!

  • @johnsule8567
    @johnsule8567 2 роки тому

    I love this, nice job. I will want to have idea and if possibly get these equipment s you guys are using. Pls I need your help. I am reaching you guys from Nigeria

  • @cliveyotieno8258
    @cliveyotieno8258 3 роки тому

    Best of the best

  • @celsosellote1079
    @celsosellote1079 7 місяців тому

    Ganda pagawa salute idol

  • @wsmart390
    @wsmart390 2 роки тому +1

    Isso parece caixas do tipo Line Array mas não são. São caixas comuns colocadas uma em cima da outra e penduradas como line array. As caixas line array possuem direcionadores de som bastante sofisticados e elas direcionam o som como se fossem canhões de luz.

  • @Hindsgaul_christian
    @Hindsgaul_christian 4 роки тому +1

    Good video

  • @rubensanchez1797
    @rubensanchez1797 4 роки тому

    Good job, very professional.... de Miami, Florida, USA

  • @ezequiasfernandes4469
    @ezequiasfernandes4469 3 роки тому +1

    Parabéns! Trabalho totalmente profissional, excelente montagem!👏👏👏👏👏👏👏👏👏👏👏👏👏

    • @yasinkhan1572
      @yasinkhan1572 2 роки тому

      Any contact details in Mumbai Maharashtra India

  • @yudiwahyudi4641
    @yudiwahyudi4641 4 роки тому

    Nice Job.

  • @elektromael197
    @elektromael197 4 роки тому

    Wah mantap..skses slalu gan

  • @NGOCNGUYEN-ti1pz
    @NGOCNGUYEN-ti1pz 4 роки тому

    Very good !

  • @Lesnz2009
    @Lesnz2009 4 роки тому +1

    Cool result, nice