You are a lifesaver! Thank you so much for doing this video. I am disabled and my Landy is my only contact with the world. I got stranded at my Sisters 400 miles away from home. Thanks to you I'll be home tonight!
@@davidmorris5161Help needed, got a 99 D2 V8, parked her up, and the following day dead battery, no codes, cranks but won't start, no spark, no power to fuel pump, on advice I've changed, CPS twice, coil packs, plugs & leads, fuel pump & both fuse boxes. Is this a BCU & ECU fault. I'm at my wits end. Any advice would be appreciated.
Thank you for the video. You helped me today. My key wasn't working, changed the batteries, and still would not open the car. I tried what you showed here and worked. 👍
This video has just saved me a lot of money 👌👌 misread the instructions on how to enter the EKA code and only really understood it after watching your video so cheers 🎉 spot on
just had do it again,starter motor died,disconect battery,remove starter,fit new one ,reconect battery ,and imobilised again,3 loud horns and flash indicators,got my eka code out,watch this again ,as forgot ,and now disco fixed,thanks for the helpfull video,time windows and steps can be bit stange ,if never done it before ,but not to bad of a job,i bought the nanocom as well now ,as my snapon verus and topdon,not really do much on the disco,seems different software setup,well pleased now,i did the same ,put the numbers on the door,works well
Had 2 codes 1 Radio code and 1 EKA code, tried this numerous times and failed! Rang Land Rover HQ in Coventry and a lady told me there are 3 codes, Radio code Ignition code & Immobilizer code after receiving all 3 we realized we were using the ignition code! Returned to the vehicle armed with the Immobilizer code and Boom it worked first time. Tip to all make sure you have the IMMOBILIZER CODE!! Happy Days - Happy Motoring. Thanks for the detailed step by step instructions.
Hi Scruf72, kindly assist how do I get these codes, especially immobilizer code? My vehicle has been locked for a year now and the mechanics are unable to start the vehicle..... Please help
@@chrispinemmweemba6189 Hi we're in the UK and I phoned Land Rover HQ in Coventry, needed to prove we owned the vehicle by sending a picture of log book in our name and a picture of the owners driving license. Within an hour she sent us the 3 codes. As I said make sure you get the immobilizer code. Unfortunately without these codes no-one can help. Some garages/dealerships may charge you so go directly to LR and you should get them for free! Hope this helps:-)
@@scruf72 hi my leader, I have received my EKA code 6DE2 unfortunately they did not provide the procedure and wanted to ask perhaps you may assist me how to go about it. The EKA code which David provided in his video above was 6 1 7 D= 13 which is different arrangement from mine and am in a dilemma how I can use mine. Any help?? ♥️
@Festeringfesterer how did you get EKA code? My vehicle has similar problem and the mechanics can't start it.... It's a land rover discovery td5 please help
Thanks for the video. Fortunately, I never had to find my EKA code. I had the red alarm indicator light flashing slow and the hazards blinking for a while, but all I had to do was lock and unlock the truck a couple times and then the light flashed super fast and I did as the manual suggested by putting key into position II and it started!! Thanks man!
just had to do this tonight ,in works car park,car gone mad,alarm keep going off,thought some one had tried to steal it ,while at work,got missus to give me the code ,on the imob card,at home ,then watch this vid ,write down key steps,then go for it ,got it done ,drive home from work,disco 2 ,td5 diesel ,auto ,thanks for vid,not sure why car lost its code,but it did,my local landrover dealer said bring logbook,photo id ,and reg car,can have the code free,but that was the next day ,as had to get there some how,not do it over the phone
you all prolly dont care at all but does someone know a way to get back into an Instagram account..? I stupidly lost my login password. I love any help you can give me
@Avi Muhammad i really appreciate your reply. I got to the site on google and I'm trying it out atm. Seems to take a while so I will get back to you later with my results.
Well we got EKA code from heritage land rover tried in vain tonput it in but no go...friend of mine turned up with vast experience of land rover probs.was there 5mns changed Transponder...BINGO it started on the button....No Code put in nothing....👍👏👏👏👏👏👏
I am so glad I found this specific, straight to the point and detailed video 🙏🏾. Thank you. I need a new car battery. Will changing the car battery affect the alarm? Will it have to be reset after a new battery is installed?
So I was using my disco yesterday and when I came back out of the store my key can’t turn in the key hole on driver side door, not letting me unlock. Worked fine before. Had to break window to get in but alarm goes off now when I try to start it, any advice?
You have to listen if codes been accepted 2 beeps from hooter..😊 sadly its not worked on mine possibly a hiccup with wrong code being given waiting for land rover to get back to me..🤔
Hello David, With the English manual in hand I interpreted “all doors must be closed” as “all doors must be locked” before I started with de procedure to enter the EKA. So, all doors are locked! But now I can not initiate the procedure with the 5 seconds in the unlock position. Is there anything I can do now?? With the key I can not unlock the door. Turning the key has no effect what so ever on neither the door lock nor the dashboard anti-theft indicator. Please help me out. Regards Nick Waringa (from Holland)
Very informative. I have a nanocom so am I able to entry vehicle in this state & get the EKA code or is that not possible & I need to purchase it. Many thanks.
Please help, my central locking unlocks the whole car on one touch, the engine will turn but doesn't start, the hazard lights won't stop working and the central locking doesn't lock the car also the temperature red light doesn't go out.
Hi this hasn’t worked for mine is it a 5 minute wait or could it be longer? Should I just wait until the lock makes the required noise regardless of the time? Thanks in advance
I have a land rover discovery td5 and it has been locked, I don't have the EKA code and the mechanics are unable to start the car.......please your assistance needed
When I turn and hold the key to unlock for 5 seconds the sec light keeps flashing every 2 sec. Has anyone else been unable to get it ready to accept the EKA?
Same here - I’ve had to do this once in the past and it worked. After flat battery charged - and needing to use this procedure again… I can’t get the light signal to start inputting the code after turning door key to right and holding for 5 secs… proper twarse.
@@JaybeeDefianceThis was on a project I picked up. But I think it may have been sabotaged to keep it from starting since the windows work on all doors except the drivers. Did a compression test and the drivers cylinders all came out low.
If you’re reading this I have a 03 discovery 2 and the immobilizer is armed I have no key fobs and no code the car has been through 8 people and I can’t do shit because I live in Ketchikan Alaska no Land Rover dealerships here I can’t do anything and I need a car I also don’t have money to do anything please help me asap (edit) I noticed how yours didn’t crank but mind did idk please help...
Bit late but might help others. Ring a Land Rover dealership in the UK. With log book/Vin details and possibly proof of ownership. They CAN get the code. I did it from Germany.
“I’ve disconnected the horns because it just drives me nuts!” 🤣 bet it keeps making you jump everytime when you open the door, it keeps sets the alarm off!?🤣
@@davidmorris5161 oh, I will try again, but what do I do if the bcu has been changed? My disco is on an 04 td5. Dont know much about it, it's my 1st disco, I bought as an mot failure and want to restore it, I've had it about 3 years and this is the first time its dont it!
@@davidmorris5161 is there a trick to start inputting the code. When I turn the key to the right and hold for 5 seconds I’m not getting the light pulse to confirm ready to input the code? I’ve opened / closed all the doors + bonnet…
Je n’es plus la clé de ma voiture landrover discovery td5 2004 à été volé ma voiture est fermer à clé comment je pourrais ouvrir ma portière de ma voiture
Quick question So I have a 01 d2 v8 and if I lock it and try to unlock it with my key it triggers the immobiliser and the alarm goes off until I put the key in the ignition and turn it to the 2nd position what would cause this and how can I fix it
You are a lifesaver! Thank you so much for doing this video. I am disabled and my Landy is my only contact with the world. I got stranded at my Sisters 400 miles away from home. Thanks to you I'll be home tonight!
Your very welcome 👍
@@davidmorris5161Help needed, got a 99 D2 V8, parked her up, and the following day dead battery, no codes, cranks but won't start, no spark, no power to fuel pump, on advice I've changed, CPS twice, coil packs, plugs & leads, fuel pump & both fuse boxes. Is this a BCU & ECU fault. I'm at my wits end. Any advice would be appreciated.
Thank you for the video. You helped me today. My key wasn't working, changed the batteries, and still would not open the car. I tried what you showed here and worked. 👍
This video has just saved me a lot of money 👌👌 misread the instructions on how to enter the EKA code and only really understood it after watching your video so cheers 🎉 spot on
just had do it again,starter motor died,disconect battery,remove starter,fit new one ,reconect battery ,and imobilised again,3 loud horns and flash indicators,got my eka code out,watch this again ,as forgot ,and now disco fixed,thanks for the helpfull video,time windows and steps can be bit stange ,if never done it before ,but not to bad of a job,i bought the nanocom as well now ,as my snapon verus and topdon,not really do much on the disco,seems different software setup,well pleased now,i did the same ,put the numbers on the door,works well
Had 2 codes 1 Radio code and 1 EKA code, tried this numerous times and failed!
Rang Land Rover HQ in Coventry and a lady told me there are 3 codes,
Radio code
Ignition code &
Immobilizer code
after receiving all 3 we realized we were using the ignition code!
Returned to the vehicle armed with the Immobilizer code and Boom it worked first time.
Tip to all make sure you have the IMMOBILIZER CODE!! Happy Days - Happy Motoring. Thanks for the detailed step by step instructions.
No problem mate glad your up and running.
Hi Scruf72, kindly assist how do I get these codes, especially immobilizer code? My vehicle has been locked for a year now and the mechanics are unable to start the vehicle..... Please help
@@chrispinemmweemba6189 Hi we're in the UK and I phoned Land Rover HQ in Coventry, needed to prove we owned the vehicle by sending a picture of log book in our name and a picture of the owners driving license. Within an hour she sent us the 3 codes. As I said make sure you get the immobilizer code. Unfortunately without these codes no-one can help. Some garages/dealerships may charge you so go directly to LR and you should get them for free! Hope this helps:-)
Scruf72 am so grateful for your response, I will communicate with them tho I don't have their contacts
@@scruf72 hi my leader, I have received my EKA code 6DE2 unfortunately they did not provide the procedure and wanted to ask perhaps you may assist me how to go about it. The EKA code which David provided in his video above was 6 1 7 D= 13 which is different arrangement from mine and am in a dilemma how I can use mine. Any help?? ♥️
David morris I love you so very much. Our car has not started for 6 hours and this worked.
Fantastic mate , car now running after broken fob , and Land Rover dealer told me C =3 when in fact it’s 12 . Your way worked perfectly
No problem bud it does make you wonder especially when a Land Rover dealer gives you incorrect information.
@@davidmorris5161 I know ! He never said about you need to add 9 . Thanks to your info it’s now up and running so can get new fobs coded
@Festeringfesterer how did you get EKA code? My vehicle has similar problem and the mechanics can't start it.... It's a land rover discovery td5 please help
Thanks for the video. Fortunately, I never had to find my EKA code. I had the red alarm indicator light flashing slow and the hazards blinking for a while, but all I had to do was lock and unlock the truck a couple times and then the light flashed super fast and I did as the manual suggested by putting key into position II and it started!! Thanks man!
just had to do this tonight ,in works car park,car gone mad,alarm keep going off,thought some one had tried to steal it ,while at work,got missus to give me the code ,on the imob card,at home ,then watch this vid ,write down key steps,then go for it ,got it done ,drive home from work,disco 2 ,td5 diesel ,auto ,thanks for vid,not sure why car lost its code,but it did,my local landrover dealer said bring logbook,photo id ,and reg car,can have the code free,but that was the next day ,as had to get there some how,not do it over the phone
Stuff me dead this worked, I love ya work David ,the horn went off but immobiliser was disabled and car started
Great video!! Super useful and a livesaver. Thank so much for this content 🙌🏻
Brilliant video. Managed to get into my disco after the second attempt. I messed up the first one. Thanks very much 👍👍👍👍
you all prolly dont care at all but does someone know a way to get back into an Instagram account..?
I stupidly lost my login password. I love any help you can give me
@Finley Rayan instablaster :)
@Avi Muhammad i really appreciate your reply. I got to the site on google and I'm trying it out atm.
Seems to take a while so I will get back to you later with my results.
@Avi Muhammad It did the trick and I actually got access to my account again. Im so happy!
Thank you so much, you saved my account :D
@Finley Rayan happy to help :D
Fantastic video, just got me out of a whole world of panic having had the battery off all day on a mates D2. Thanks 😊
No problem mate
Well we got EKA code from heritage land rover tried in vain tonput it in but no go...friend of mine turned up with vast experience of land rover probs.was there 5mns changed Transponder...BINGO it started on the button....No Code put in nothing....👍👏👏👏👏👏👏
I am so glad I found this specific, straight to the point and detailed video 🙏🏾. Thank you. I need a new car battery. Will changing the car battery affect the alarm? Will it have to be reset after a new battery is installed?
No it won’t just make sure the vehicle is completely unlocked before removing the battery.
So I was using my disco yesterday and when I came back out of the store my key can’t turn in the key hole on driver side door, not letting me unlock. Worked fine before. Had to break window to get in but alarm goes off now when I try to start it, any advice?
Great video, so well explained
Can I say a massive thank you it worked...cheers 🍻🍻
Just a quick question how can I get my remote to work with the disco???
Worked a treat , great video !thanks
Just used this and worked perfectly!!! Thank you
Will this procedure allow the central locking to program as well?
Hi mate are codes individual to each an how do you get the code? Mine is in the same state?
Please how do you disable the horn/sounder , and also if I don’t lock it again will it stay in this state re the removed immobilisation state ? Cheers
Will this work if I buy a new fob and put it in my case with the original key? Thanks
Great Info here. Thank you for the video and making things clear 🍻
Awesome of you to share this!!
Thanx that was extremely helpful
Thanks for the video will be trying this later much appreciated
Amazing! Worked perfectly, thanks man… 🙏🏽
this code is unique for each land rover disco 2??
You have to listen if codes been accepted 2 beeps from hooter..😊 sadly its not worked on mine possibly a hiccup with wrong code being given waiting for land rover to get back to me..🤔
Hello David,
With the English manual in hand I interpreted “all doors must be closed” as “all doors must be locked” before I started with de procedure to enter the EKA. So, all doors are locked!
But now I can not initiate the procedure with the 5 seconds in the unlock position.
Is there anything I can do now??
With the key I can not unlock the door. Turning the key has no effect what so ever on neither the door lock nor the dashboard anti-theft indicator.
Please help me out.
Regards Nick Waringa (from Holland)
Thanks mate you’re video saved the day
How do we get the code pls
Can the Alarm Immobilizer be turned off?
Very informative.
I have a nanocom so am I able to entry vehicle in this state & get the EKA code or is that not possible & I need to purchase it.
Many thanks.
Please help, my central locking unlocks the whole car on one touch, the engine will turn but doesn't start, the hazard lights won't stop working and the central locking doesn't lock the car also the temperature red light doesn't go out.
Hey mate, what dose it mean when you try and activate the code for the 5 secs but the red flashing light dosent change?
The micro switch in your door lock is probably not working so you may need to replace your door lock.
Excellent video..
Hi this hasn’t worked for mine is it a 5 minute wait or could it be longer? Should I just wait until the lock makes the required noise regardless of the time? Thanks in advance
If it doesnt work you probably need your BCU unlocking, needs to be removed and sent to a specialist
I have a land rover discovery td5 and it has been locked, I don't have the EKA code and the mechanics are unable to start the car.......please your assistance needed
Hi mate do you know how to find out the code has having the same issues with mine
When I turn and hold the key to unlock for 5 seconds the sec light keeps flashing every 2 sec. Has anyone else been unable to get it ready to accept the EKA?
Same here - I’ve had to do this once in the past and it worked. After flat battery charged - and needing to use this procedure again… I can’t get the light signal to start inputting the code after turning door key to right and holding for 5 secs… proper twarse.
@@JaybeeDefianceThis was on a project I picked up. But I think it may have been sabotaged to keep it from starting since the windows work on all doors except the drivers. Did a compression test and the drivers cylinders all came out low.
Thanks alot!!! Its working !
If you’re reading this I have a 03 discovery 2 and the immobilizer is armed I have no key fobs and no code the car has been through 8 people and I can’t do shit because I live in Ketchikan Alaska no Land Rover dealerships here I can’t do anything and I need a car I also don’t have money to do anything please help me asap (edit) I noticed how yours didn’t crank but mind did idk please help...
Bit late but might help others. Ring a Land Rover dealership in the UK. With log book/Vin details and possibly proof of ownership. They CAN get the code. I did it from Germany.
Excellent video
Is it possible to juts have numbers as the eka code?
Yes mate
Excellent, came across this vid, mine has just locked out …how did you disable the horns?.
Just unplug them mate
@@davidmorris5161 errrm where? 🤣🤣
Brilliant thankyou
“I’ve disconnected the horns because it just drives me nuts!” 🤣 bet it keeps making you jump everytime when you open the door, it keeps sets the alarm off!?🤣
The code is in de vin number?
Got a zero in my code. Do we think it's actually a 10, or do I increase all digits in the code by 1?
Damn lol idk bout that one..but did u figure out how to enter the radio code?
Did you ever figure this out ! Just got my email code and it’s got a 0 😩😬
Great 👍 thanks Dave
Where is the aka code found on the disco 2 v8
Perfectly and simply described
Hi. Can you help to get the EKA?
but what do you do if your lock is broken on your door... I literally can't turn the key.
I have the same issue mine won’t turn. It worked fine yesterday then it just stopped turning so I can’t unlock it
Did you get this resolved?
this work on any discovery?
I have 5f13? How i to musí make?
Great, thank you
Sure wish I could figure mine out drives me crazy
Excuse me, can your code work for my truck?
Realice los pasos, pero al esperar los 5 minutos después de realizar los pasos, no apaga la luz de testigo en el cuadro de instrumento
Can this work on a RRsport?
Hello sir I have an all key lost solution can this work ? And how do I please accès the code ?
Thats great but how do you deal with a letter, is that the number it falls in the alphabet?
It explains the letters and numbers in the video cheers
I’m intrigued as to how the Disco was in lockout mode in the first place? 🤔🤷🏻♂️😷😷🙏🏽🙏🏽🦘🦘
There is no explanation this one would just do it completely random.
I can’t find my EKA number anywhere called a local Land Rover and he said he wouldn’t know of a code like that
Is this the same for the P38?
How did you find your code?
I've just received my code from landrover it's a 4 digit code without any letters, is this correct? Will be trying it this evening.
Yes it can be mate
@@davidmorris5161 I've tried it twice and it hasn't worked!? Help
@@foreversingle1975 it could be that the BCU has been replaced at some stage so the code would be wrong
@@davidmorris5161 oh, I will try again, but what do I do if the bcu has been changed? My disco is on an 04 td5. Dont know much about it, it's my 1st disco, I bought as an mot failure and want to restore it, I've had it about 3 years and this is the first time its dont it!
@@foreversingle1975 you may need to take it to someone who can re code it or mane even change the BCU set
Si how do we find our number ?
Is a 97 the same
I bay my car second hand how can I get my car security code ?😞
Please watch the video. You can get it from a Land Rover dealer or through a Nanocom thank you.
Thanks Dave! I've read online that an EKA code of 1515 works for most. Is that something you've heard of? Thanks again.
I’ve never heard of that mate but not saying it isn’t true.
Thanks for such a quick reply. Just giving it a try now so I'll let you know
@@davidmorris5161 Nope.... Didn't work :)
@@davidmorris5161 is there a trick to start inputting the code. When I turn the key to the right and hold for 5 seconds I’m not getting the light pulse to confirm ready to input the code? I’ve opened / closed all the doors + bonnet…
@@JaybeeDefiance it sounds like the micro switch in your door lock is faulty
My red light doesn’t stop for a second before you enter the code
Hi mate good video helpfull just got td5 i know how and done the eka how do u bypass it to get just back to normal
Je n’es plus la clé de ma voiture landrover discovery td5 2004 à été volé ma voiture est fermer à clé comment je pourrais ouvrir ma portière de ma voiture
What is superlock ı dont know superlock can you teach me ıt
WTF why do they have to put on this system? Very complicated... got my p38 disable for couple of weeks!
Quick question So I have a 01 d2 v8 and if I lock it and try to unlock it with my key it triggers the immobiliser and the alarm goes off until I put the key in the ignition and turn it to the 2nd position what would cause this and how can I fix it
You should only use the key to unlock the door if the remote is damaged or has a flat battery in it.
👏👏👏🤝
Landrover sent me my coke but it dosent start with a number below 9 and I can't get it to work. It's B69F
How and where can I find that code bro ? Thanks in advance
Like it says in the video mate either through a nanocom or a Land Rover dealership cheers
Can you remove that security feature 🤔 🙄 this ridiculous 🙄 I know where one is for $2500 clean title and would run and drive if it wasn't locked down.
Great info this but is posible to traslate spanish I have a Rover Freelander 2004 stand by. (only they most importan)
Have Google translate the following website:
remotekey.co.uk/land-rover-keys-remotes-alarms-immobiliser/land-rover-eka-code-emergency-key-access-code/