Good info! Of course I got the PH- bloom instead of grow. Is it totally useless in Coco with the A+B nutrients? Should you use PH- grow throughout the whole cycle, even in bloom when groing in coco?
Hi, glad you liked it. It is indeed better to use pH grow during the whole cycle while using COCO. Otherwise, precipitations can appear. In your case you can still use the bloom but you should mix really carefully.
I'm growing tomatoes in Coco and they're just starting to grow flower buds. I used Floramax last season and had tremendous results. I've been given a lot of canna products and am totally lost with measurements! I have a 75 litre drum which I use and need this as I have 6 plants at the moment. Last grow I had an EC of 2.5 and pH of 5.5 at pre flower and when fruiting bumped it up to EC 3.5 and pH of 5.6. Literally 100kg of tomatoes! With Canna products, can I use an EC that high as tomatoes are gross feeders?
Yes. EC is just a measurement of dissolved salts in a solution. If it worked before it should work again if you are using good quality fertilizers. It could be that EC measurement is high because salts that are not really needed for the plant are in the solution. (not saying it is the case with Floramax, we do not know this product)
Hi, do you add the nutrients solution during the whole phase or do you just add the nutrients once a week and just water until the end of the week or until the next phase?
Hi, you should add the nutrient solutions with every watering. The frequency depend on the method used and other parameters such as the climate, size of the pot, amount of light,.... Regarding the nutrient solution itself, the quantity of nutrients varies during the growth. For more info you can check this video about our growschedules: ua-cam.com/video/7IWs9NBkxe0/v-deo.html
Hey i am using canna coco a and b and i use the terra aquatica ph down. after i mix the solution i let it stand in dark place and within two days the nutrient solutions turns cloudy.. so most likely some sort of chemical reaction or bad organism growing in it.. Could the problem be caused by the terra aquatica ph down? It contains phosphoric, nitritc and citric acids Or could the problem be caused by letting the water stand without agitation, causing some bad bacteria to grow or lets say the water/nutrient solution is going stagnant?
Hi again Canna,After using Coco pro plus and asking you many questions I came to the conclusion that High frequency fertigation is more suited to you cogr substrate and nutrients instead of the One I have and Coco A&B.Could you elaborate a bit on cogr and High frequency fertigation with drippers for an hobby home plant lover?
Indeed that is right. Our COGr nutrient line is suitable for the use of COCO in combination with RtW. Regarding the problem you mentioned in your other comment, this version includes more P as you flush the potassium released by the substrate. This line as a Vega A/B for the vegetative phase and a Flores A/B for the generative phase. We would suggest mixing your COCO professional plus with Clay pebbles, that will make the substrate drier. As you probably know, what you should do here is watering more often your substrate to keep it moist (drain between 10-30%).
@@CANNAAustriaI have seen loads of Coco coir plants thrive and produce good yields many time and none of them used Cannazym or Canna Rhizotonic or Canna Boost at any point.
Hi Canna, i’m listening a lot actually about how to grow and a lot about the importance of measuring. i’m from different country where there almost 0 information about. iwanna make some content with my language and talk about what you are talking actually, so am i allowed? i’m planning to make a content with canna products so if i’m allowed ill start to write first and then make some videos . let me know your thoughts guys , we may can even become partners in the future .
@@markusrobertson588 Technically, the order here does not matter for the solution. So you could do both, end-result will be the same. However, it is true that drops of acid might potentially harm the material you are pouring in depending on what it is made of.
great video.tnx
Currently using these solutions , switched out to this after the solutions I was using didn't seem to work.. Thanks for the great content...
Good info! Of course I got the PH- bloom instead of grow. Is it totally useless in Coco with the A+B nutrients?
Should you use PH- grow throughout the whole cycle, even in bloom when groing in coco?
Hi, glad you liked it. It is indeed better to use pH grow during the whole cycle while using COCO. Otherwise, precipitations can appear. In your case you can still use the bloom but you should mix really carefully.
thanks for making this video
Bkn el tatita re maestro🎉❤
Nice Videos Pieter
I'm growing tomatoes in Coco and they're just starting to grow flower buds. I used Floramax last season and had tremendous results. I've been given a lot of canna products and am totally lost with measurements! I have a 75 litre drum which I use and need this as I have 6 plants at the moment.
Last grow I had an EC of 2.5 and pH of 5.5 at pre flower and when fruiting bumped it up to EC 3.5 and pH of 5.6. Literally 100kg of tomatoes!
With Canna products, can I use an EC that high as tomatoes are gross feeders?
Yes. EC is just a measurement of dissolved salts in a solution. If it worked before it should work again if you are using good quality fertilizers. It could be that EC measurement is high because salts that are not really needed for the plant are in the solution. (not saying it is the case with Floramax, we do not know this product)
So the grow store I bought the terra line from only had general hydroponics ph up and down. Will this work or do I need to get your brand?
It should work yes. The concentration might differ so you might need to use more drops than with CANNA Ph products.
Hi, do you add the nutrients solution during the whole phase or do you just add the nutrients once a week and just water until the end of the week or until the next phase?
Hi, you should add the nutrient solutions with every watering. The frequency depend on the method used and other parameters such as the climate, size of the pot, amount of light,....
Regarding the nutrient solution itself, the quantity of nutrients varies during the growth. For more info you can check this video about our growschedules: ua-cam.com/video/7IWs9NBkxe0/v-deo.html
Hey i am using canna coco a and b and i use the terra aquatica ph down. after i mix the solution i let it stand in dark place and within two days the nutrient solutions turns cloudy.. so most likely some sort of chemical reaction or bad organism growing in it..
Could the problem be caused by the terra aquatica ph down? It contains phosphoric, nitritc and citric acids
Or could the problem be caused by letting the water stand without agitation, causing some bad bacteria to grow or lets say the water/nutrient solution is going stagnant?
Hi, It is likely to be the phosphoric acid that reacts with the fertilizers. You could solve that by using CANNA pH- grow during the whole growth.
Hi again Canna,After using Coco pro plus and asking you many questions I came to the conclusion that High frequency fertigation is more suited to you cogr substrate and nutrients instead of the One I have and Coco A&B.Could you elaborate a bit on cogr and High frequency fertigation with drippers for an hobby home plant lover?
Indeed that is right. Our COGr nutrient line is suitable for the use of COCO in combination with RtW. Regarding the problem you mentioned in your other comment, this version includes more P as you flush the potassium released by the substrate. This line as a Vega A/B for the vegetative phase and a Flores A/B for the generative phase.
We would suggest mixing your COCO professional plus with Clay pebbles, that will make the substrate drier.
As you probably know, what you should do here is watering more often your substrate to keep it moist (drain between 10-30%).
@@CANNAAustriaWhy is Canna Boost so expensive?
@@CANNAAustriaI have seen loads of Coco coir plants thrive and produce good yields many time and none of them used Cannazym or Canna Rhizotonic or Canna Boost at any point.
@@GMT439 why does a Maserati cost a lot of money?
You mixed the B then the A is that correct?
It does not really matter, the most important is to stir well in between.
@@CANNAAustria thank you! at which point would you add calmag if needed
@@mast3335 Before adding the fertilizer.
Hi Canna, i’m listening a lot actually about how to grow and a lot about the importance of measuring. i’m from different country where there almost 0 information about. iwanna make some content with my language and talk about what you are talking actually, so am i allowed? i’m planning to make a content with canna products so if i’m allowed ill start to write first and then make some videos . let me know your thoughts guys , we may can even become partners in the future .
Anyway I can contact you for some help ?
Hi there, of course we can help. Please send an email at contact.international@canna.com
I have the regular ph up and down. That ok?
Yes, the difference with the Pro versions is a lower concentration.
@@CANNAAustria thank you for the quick response 💪
What type of water u start with
In the video we start with normal water.
5:50
Erst das Wasser, dann die Säure!
First the water, then the acid!
Water < nutrients < additives < pH correction. Which is what Pieter does in the video.
@@CANNAAustria he diluted the PH down at 5:50 in the wrong way. First water then acid.
@@markusrobertson588 Technically, the order here does not matter for the solution. So you could do both, end-result will be the same. However, it is true that drops of acid might potentially harm the material you are pouring in depending on what it is made of.