Korg X3 - Floppy Drive Solution
Вставка
- Опубліковано 14 січ 2008
- I recently found a KORG Floppy Disk Emulator, that replaces the old floppy drive with a USB input. It eliminates the entire video above. It is supposed to fit in place of the old floppy drive.
Here it is amzn.to/30snBlS
Now I haven't bought one yet, but I do believe that you have to format the USB thumb drives to store information like a floppy disk. Which may mean you only need low capacity thumb drives. Not sure on that. If anyone has one leave a comment below.
Get the x3file2sysex.jar file here:
launch.groups.yahoo.com/group/...
Or here
i.korg.com/SupportPage.aspx?pr...
:) - Навчання та стиль
Thank You. I have an X3, and thought I could never use my songs again, and though it is a rather daunting procedure, am willing to attempt to get my Korg going again, cause it was the best keyboard in the world to me. Have had many after this one, but the X3 means the most to me. Thanks again for the great article.
This video helps me to restore the factory settings in my X3 after the battery run out. Thank a lot!
Rhomis: U Rule big time! My X3's floppy died years ago and since I had screwed up the programs, II only used it as a MIDI controller for my computer recordings. I couldn't reload my original Programs/Combination disk nor my own material, that I thought lost until I' d pull myself together to buy a new drive. Your instructions work to the letter! Just picked my own MIDI card, set the settings and the files transferred without a glitch. Awsome!
@jaydominic
I am glad you find it useful
The X series were one of the best keyboards of the time. The floppy drive was a piece of crap, USB was introduces 2 years after the KORG X3.
The USB flash drive was for sale in 2005, and very expensive.
The only other option would have been a serial port, but not practical for portability.
They should have used a standard 1.44 floppy drive, instead of the weird custom 720 KB.
you got a thumbs up as soon as i heard 'piece of crap' i just know its going to be a good video, thanks for uploading
Thank you i know you didn't have to help me. I tried get the book however the internet wouldn't let me. I appreciated what you did for me so very much.
@lsupernaw96
I updated the link.
Just remember at 4:16 in the video tutorial, MPU-401 may not be listed since you are using a USB device. Try a setting that is different, especially if it indicates a USB device.
With Sonar and Cakewalk and can do the same process.
I have saved many times my data to the sequencer you save the songs.
or load from pc to x3 or N364 01 / w. depends on the keyboard connected via midi.
Como faço para transferir uma sequencia do korg x3 para Cakewalk sonar8?
Thanks a lot! Your video helped me out, and is very funny, hilarious well-made and explained, too! :)
I have a Korg Havian 30 with a USB port but it will not enable the port when I plug in my thumb drive.
I am not sure what the problem is...
Since you have USB, try selecting something other than the MPU-401 option. (4:13 in the video)
See if there are any other options in MIDI-OX, that can be changed for you.
@MrVision14
Did you "right-click" the link and "save target", or "save as"?
Thanks,
The music is founs at FreePlayMusic and is titled ""shopping spree".
Buen día amigo, adquiri una unidad usb de las negras con un adaptador para un teclado yamaha psr 620, pero no he logrado ponerlo a funcionar usted me podrá ayudad. gracias.
Hi there, does anyone of you the exact reason, why the "drive is not ready"? I have ideas about the disk drive of Matsushita after changing belt ... but did anyone solve the problem technically? Thx
Was given away a Korg X3 yesterday which i really like, i always get a "data error' message with disks so i decided to go this way and now i have a nice X3 restored with original patches, it really worths a lot even today, btw the best part of this video is the female voice that seems it was made using older "vocoder" programms in old computers such the infamous Amiga 500
I'm glad you got it to work. It is a classic.
A shame that KORG used non standard floppy drives.
@@rhomis Well to be honest i dont know what they where thinking back then in Korg, they could simply add a factory reset prodedure in the software of the synth with the original banks somewhere in rom. And YES it was an easy fix actually i managed to upload patches from the first time with SENDSX withough being forced to adjust speed of transfer etc like in older synths eg the DX 7, if you dont have the right midi interface/computer card.
Rhomis Rhemis Any chance you have the x3file2sysex.jar file or the preload sysex files that it converts to?
that's what i'm looking for, many thanks!!
@rhomis I was wondering if you know anything about the Korg X3R ... I tried the steps in the video, however the rack version doesnt have a midi local setting. The machine stays stuck on "processing" when I use MidiOX to transfer sysfiles
Any ideas?
Hi! My x3 has lost the internal battery with all the sounds except GM and I cannot put them back from a PC, (the keyboard does not indicate that it is receiving data).
The connection works fine because I send notes from the PC to the keyboard and they sound. Also if I play the keyboard I see the notes on the PC. Sending Sysex from the keyboard to the PC also works. In all cases in the USB cable the LEDs light up so I see that the data is sent from and to the keyboard, however it does not recognize them when sending them from the PC (it does not even show on the screen that sysex data is being received) . I think it is a problem with the configuration of the keyboard or the PC software.
I am using Midiox on the PC. As for the keyboard, I have followed the instructions in the manual regarding the configuration of the Global mode (filters, memory protection, etc.) but there is no way. I've tried changing the delay and buffer size and it doesn't work either.
Can anyone please help me?
Thanks!
hi the screen or with few volts blaklihg works is that I will burn the transformer at the source that sends energy to the retention measures garment that reaches to the entrance of tranfo and I get 6 volts and the transformer and the low to to 1.5??? as I can because I do not get how I can reduce the tranfo energy value is needed thanks
@rhomis Hey man do you know if this will work with the N364 as well since they use the same file format?
Absolutely loved this tutorial! What was the name of the 1950's/60's song that was used as underscore? Really enjoyed it! Thanks-
love this vid! I can do the same with Sonar but doing the geeky stuff really makes my day! :D
donde puedo comprar las teclas para un korg x3, se me quebraron
Sounds, songs, settings, etc... can ALL be saved onto the PC with the method described in the video here. No need for a floppy in this particular case.
WATCH the entire video, then you can save your hard work from the X3 onto the computer.
I updated this video "information". The new link is at the X3 Yahoo groups. You may need to sign up to Yahoo X3 groups to access it.
korg n364 ,i have no floppy disk ,how i can factory resat ?
How can I reach to "sequencer/edit/1F screen (KEY WINDOW)" Does anyone know how to do it?
@lsupernaw96
I just found out that RapidShare only allows 10 downloads, then it is gone. I'll try Hotfile or some other server.
@fitimshaqiri
Follow the video instructions.
The original Korg X3 files (from the floppy) can be found at the Yahoo Group "Korg-X3".
You need to join the group to abtain access.
Do you know what would be the issue if it displays DATA ERROR?
The problem with the X3 floppy drive means the owner can no longer load programs that are formatted on floppy. They need to get into the X3 before they can be saved to computer. How do you load floppy discs into the computer to be loaded via system exclusive?
how do i get approve to yahoo to get the sounds
hey can you do stuff like this to a korg triton? and donwload stuff of the internet and put them on your korg triton classic?
If your Triton is like the "KROG X3" or the "KORG M1", which means having the capability to use MIDI Dump and MIDI Load, then it is very likely that you can do it.
I Googled up the KORG Triton, and so far I detect that you can do basically what this UA-cam tutorial tells you.
It may be worth a few dollars to buy a MIDI patch cord and give it a try. If it don't work, at least you can still connect the Triton to your PC and use the basic features of the MIDI interface.
Hey, i can't trasmit not data from PC to x3 !!! My usb cable it's good. But, transition from X3 to PC not problem. what's the my problem? Help me please
Thank you so much for this video and instruction, it worked for me and saved me time and money.
You can save all of the DATA from the Korg X3 with the MIDI cable. I am greatful that a few people from the Yahoo Group guided me onto this method. I hope the video helps.
PM me if you have any questions.
@rhomis I appreciate you sending me the link. I finally just got a USB MIDI cable and even though I downloaded the link before and saved it, it says the file type is RAR instead of JAR and it doesn't work. I thought I would go back and download it again but Hotfile says the link is removed. I would really appreciate your help again. Thanks so much for your time!
i have restart my korg x3 and lost all sound efects how do i get sound effect now i dont have the flopy disk i need help
Hello! Its 2023... And I hope you're still active, Rhomis. I just got the X3 and I love it, trying to add new sounds to it. Found some SysEx sounds online (So im skipping the JAR file step), tried the video's method to add them via USB/Midi but no luck. When I do the "Send SysEx" nothing happens on the X3's screen. Is there something I'm missing? Thanks
It has been a while since I used my Korg X3.
Make sure you select the correct hardware
At 4:11 there are a few selections in the video. USB or some other device may also be selected.
hola yo quise entrar a la recomendacion que das en el tutorial y la verdad no pude en varios dias pero por fortuna segui en la investigacion de que me salia esa nota drive not ready y la solucion fue cambiarle la vanda ,liga o correa como se le llame y gracias a dios se soluciono el problema la banda la consegui en ebay por$ 6.80 dolares de todas maneras gracias por el tutorial
hi sir can you pls help us we have a korg x3. theres no strings,sax, flute pls. help us we also dont have a floppy disk
can you use a midi/usb?
Incredible... Very good! Thanks!
Hi mate. can you help please ?
I have purchased a korg m1 synth and bought a floppy disc with different sounds on it , thinking I was getting the sound cards . Is there any way I can transfer them on to the m1?.
would be very grateful if anyone could help.
Many thanks ian
I am not familiar with the KORG M1. I never tried to transfer the files the same way through the MIDI as in the KORG x3. LOOK HERE for instructions to do it on the M1: bobbyblues.recup.ch/sysex_procedure.html
I am also looking for the same file but it seems that it is not still online. Can someone please send it to me?
YES you can!
However the "MIDI Output" listing is different than this video tutorial (see 4:17). It will not be "MPU-401", instead, it will probably be a USB listing.
Good Luck!
@rhomis
The rapidshare link is not working again. Could you please update it so I can download the file? Thanks!
does anyone have a working link for the x3file2sysex.jar file? Who knows how long it's gonna take to get accepted into the yahoo group?
how can we get the korg x3 files sir? thanks!
@curtnedim
Join the YAHOO Korg X3 GROUP.
All the answers are there, and all of the original KORG files are there too.
I created this video based entirely on information from that Yahoo Group.
Help i need a manual for my korg x3
rapidshare link doesnt work, could u please update it so we can still download the file?
Has anyone been able to find this file X3File2Sysex.jar I cannot seem to get it from anywhere and my X3 is a brick until I do
Go to this page and click on "Software". There you will find a sysex and factory preload .zip files: i.korg.com/SupportPage.aspx?productid=630
ahha..i so missed this demo..i never thought it sounds good in here...haha...my korg has been deposed for many years...
The following are things to be repaired...
1. LED display...it' s so dim...
2. Disk drive...not working anymore
3. Up/yes button...gone. ..
4. Some keys are not behaving as they should...like, insensitive to touch, or some just don't sound...
Any help? Thanks...
Hi Guys! I have a student who has the Korg X3. He wonders how one could save a setting sounds, he maybe has created by using such piano, into a floppy disc. He also wonders, if possible, how to save a combination of sounds, by using the same source, into a floppy disc. I'll appreciate your concern regarding to these questions. Please just help to develop the steps he should follow in order to succeed in this technological operation.
@dgarnelo777
Resetting the KORG-X3 will make it sound like a cheap Casio toy. But if you absolutely need to, do this:
Hold 'Page Down' and '0' while turning it on.
Thank may God richly bless you and your family. I did what you said. I was left clicking when i needed to right click.
@FacesUnderTheMirror
It won't hurt to give it a try. Let us know what happens.
awesome tutorial !!!!!!!!!!!!!!!!!!!!!!!
I sent you a message. Try playing with the settings in MIDI-OX, mainly the DELAY settings.
Also, "USB MIDI" and "Sound-Card MIDI" may or may not work with the X2. But from what I hear, it should work. Let me know what you do, if you get it to work.
It is not my service. All I did was just make a video to help KORG users. That YAHOO-group place is the only one I know that hosts the files. (5 years ago)
thanks sir i will try it. ill inform you latter your a big help sir goodbless you!
Why I can`t complete the last step. When I send the SySex fie to the X-3, the LCD not show the message "processing .....". Would you help me?
At 4:10, make sure you select the correct MIDI input. This video was made before USB and other versions of MIDI devices were available. If you are using a USB midi device, then select that from the list.
@@rhomis Thanks a lot Master. I'll follow your advice. I have heard that the usb-midi cable or interphase must be an a good brand cable or it won't work properly. It would be the reason. What do you think?
@@juanoropeza2913 any midi device attached to your computer should work. I have an old computer with Windows 7 just for that purpose, with older hardware.
@@rhomis Thank you again Master. I'm gonna change my midi-usb device and try again.
@@rhomis Hellow Master! Thanks for your wise advices. Finally I changed my Usb-Midi Interphase With a good results at the first attemp. I restored my Korg X-3 fully.
Hi guys can you pls help me how to download many synth effects org brassing and more . Or comment the link on yt vids tutorial here. I brought my korg x3 I don't know how to download . Plss help
Google search this:
"KORG X3 free patches, sound sets"
There are instructions there too.
The KORG link at top still works.
Hooo thak´s now i am sing up on yahoo groups and send my request. Thank you. Have a nice day. :)
Hello I've requested membership but haven't heard anything. Can anyone help me with the file x3file2sysex.jar? I can't locate it anywhere. Any help is appreciated. Thank you.
+David Thomasson
Get your files here goo.gl/lQpQMl
Hurry up, because the link will expire soon! Good Luck!
+Rhomis Rhemis
Thank you very much!
I can't send preset sysex to Korg X3. But I can receive dump. Please help
Sorry for the delay. Sounds like you are on the right track. If you are using Serial port MIDI it should work. If you are using USB to MIDI, you may have to tinker with it in the settings..
Rhomis Rhemis Can you tell me more about the settings. I'm not very familiar with keyboards or MIDI.
bro you just need to replace the floppy drive belt
Hello! I recently picked up a Korg X3R with a malfunctioning floppy disk drive (boo!) and stumbled across this tutorial.
As an aside, I love the music underscoring the video. :)
Though, I am not sure if anyone else has run into this, but at about 3:38 where GLOBAL mode page 3B is shown, in the video is displayed as:
LOCAL/NoteR
ON ALL
Whereas mine simply displays:
NoteR
ALL
I am not sure if I have a different X3R ROM / OS version ? Will still try to follow the video from here and see how far I get!
It's been a long while since I tinkered with my KORG X3. It should still work, keep trying. You can always RESET the keyboard on startup, but you will lose everything. Technology has changed since then, USB now instead of the MIDI game port. I keep an old PC handy (with an old version of Windows installed), just for the purpose of the KORG. I have kept my KORG mainly for the sound it produces. It is also the same keyboard that the band U2 used in the day.
@@rhomis thank you for your reply!
I had success last night, so the X3R is restored!
I am guessing this might be a difference between the keyboard and sound module.
Thank you again!
@@dkupka2 - Great. I am glad you got it working. I have tried years ago to get standard floppy drives to work, KORG had custom made floppy drives for that keyboard. I wish there was a USB kit to install in place of it, simulates the floppy drive.
@@dkupka2 ahojky dane, jaks to presne udelal? ja to zkousel nastokrat a porad nic? jako muzu jeste zkusit koupit neaco jako klon original disku ale je to asi 20euro.. dik
No, I don't know the answer to that.
Go to this link above, to the Yahoo Groups. You'll need to go to the "files" section (.../group/korg-x3/files/) and download "all" from the "all" folder.
mi x3 no recibe pero si los envia aa la cpu que puede estar `pasando
Hola ya solucionaste tu problema?a mi korg le pasa lo mismo,no recibe solo enviad datos a la compu
ODAIR LARA. A mi me pasa igual! Solucionasteis el problema?
Do some research. You "may" find that a standard PC floppy drive may work (unlike the custom 720KB floppy in the KORG X3), but I am not sure on this. Worth a shot.
I have seen replacements for the ASR-10 for about $80.00
OR
IF you know JAVA script , it could be possible to write a *.jar patch that resembles this KORG tutorial. Then use the MIDI connection.
For about $80.00, it may be worth it, the ASR-10 is a nice system.
Send me the link again please. And walk me through it.
Need files to load via midi. Yahoo group not letting me in. Help?!?!
You need to sign up with yahoo and then sign onto that KORG X3 "Yahoo group"
I did and awaiting mod to ok me to group.
Must be member. Mod must approve.
Rhomis Rhemis
If you have the file can you email it to tod@todanddawn.com possibly?
just replace the floppy drive belt its easier
Thje link is now updated
u know somethin like that en korg triton with floppy disk
Thanks..
@MrVision14
it is here:
korgx3.free.fr/en/manuel.php3
Oi. Vou tentar aqui. Espero que dê certo kkkk
Ha! What a piece of crap! lol. Thanks a million. Everything works!
very please to invite (yahoo group)
wow. i hope this works. i lost literally thousands of tracks.
Hello!
PM me for help!
Bye
Easier to just take the thing apart and replace the floppy drive ! Ye gods, what a convoluted load of bs !
+colliecandle
No it is not. The floppy drive in the KORG X3 is proprietary to that keyboard only. I have literally tried dozens. No kidding, I have amassed over 30 floppy drives and not a single one will work. For one, the connections are not the same. I have tried modifying ribbon cables and making custom connections. No luck. The MIDI patch is good enough for that old keyboard. I use it as a secondary instrument.
Dude, really? Can't you use some more commonly used sharing service? Yahoo? Who does even use that anymore? I wen't trough all the trouble of creating a yahoo adress, profile only to find out that you need to approve it in order for me to see the link. I just wasted a good 20 mins of my life, and got nothing, this is just false advertising.
Can somebody upload the "x3file2sysex.jar" on a file ftransfer service? you cant find it nowadays.... yahoo groups are officially down..
If you know of a serve for free let me know. I'll post it there tonight.