Doing similar today and tomorrow. Purchased a double row LED fog and spot 8 inch bar. Fab'd up a mount and had my brother weld it up. $9.00 got me an Amazon special wiring harness with fuze, relay and switch. Total bill so far is less than $55.00 and that's less than an aftermarket mount alone. Appreciate you guys posting this, as I can use this for the work commutes when the weather clears.
@@drunksLnZ me? i fab'd my own mount. it appears the FL guys were able to use the light bar mounts thst came with the light. they put the links in to the light. all you'd need to do is some grinding or filing to remove the tab corner. hope that helps. be careful of the light you buy. mine were hella cheap. i had to silicone everything to make it watertight, or water tolerable.
@@FloridaOutdoorAdv It took me a little longer than expected due to a bad wiring loom with switch. basically cut the cheap loom for the wiring and duplicated your blue wire lead. WOW! I had no idea what I was missing at night. When I commute here in Colorado it's early in the AM and I am sure I have passed some deer and elk on the side of the road and didn't know it. Not anymore! Once again appreciate the great vid. Best of luck to you all.
thanks for making install easy ... Word to others the blue n black wire works, BUT, the bike has to be running if you are checking the wiring or for the light to come on ...
Muy bueno el video, bien explicado y facil de instalar. Lo utilizare para dos leds U3 en mi Super Tenere. Gracias! Soy de Argentina, Chubut, Comodoro Rivadavia.
Though I can’t understand half of what your saying I love your videos!! You guys have a lot of fun!! Wish I was down there on some of your camping trips !!
Hey guys, glad I found your tutorial, helpful enough-ish to me... I was hoping you can explain a little further which circuit was chosen (what that blue cable lights were hooked to does, how to find it... etc) Thanks again!
Nice install. However, without a switch, and it being 'always on' you're most likely going to be blinding drivers coming towards you, especially at night. If you don't want to use a switch, why not wire into the high beam circuit instead. And since motorcycle lights are always on when the bike is running, having the LED bar, also always on, creates a continuous load (drain) on the bike's electrical system. Anyway, just a thought. Cheers.
hola como te va, me decis las medidas de largo ancho que tiene este accesorio , y de cuantos watts es el mismo, tengo una super tenere tambien y quiero colocarle uno tambien
Old thread I know. But I just ordered this light for an ES model. Couple questions: 1) Are you still happy with the light? 2) Was it ok to keep them on without a separate switch? 3) At night do oncoming drivers flash at you because it’s too bright? Thanks. Nice work and great find!!!
Very nicely done. I'm thinking of picking this up for my '17 Super Ten. Does the plastic cover you removed at the beginning of the video fit back on once the light is installed?
@@FloridaOutdoorAdv I'm referring to the part that is removed at 0:50 seconds. But if everything went back on then that's what I was really needed to know. Thank you
Doing similar today and tomorrow. Purchased a double row LED fog and spot 8 inch bar. Fab'd up a mount and had my brother weld it up. $9.00 got me an Amazon special wiring harness with fuze, relay and switch. Total bill so far is less than $55.00 and that's less than an aftermarket mount alone.
Appreciate you guys posting this, as I can use this for the work commutes when the weather clears.
Ptown Rat 🍻👍
can you send me the link to where you got the light bar and mounts please
@@drunksLnZ
me? i fab'd my own mount. it appears the FL guys were able to use the light bar mounts thst came with the light. they put the links in to the light. all you'd need to do is some grinding or filing to remove the tab corner. hope that helps.
be careful of the light you buy. mine were hella cheap. i had to silicone everything to make it watertight, or water tolerable.
Zaira T link is in the video description. Thanks.
@@FloridaOutdoorAdv It took me a little longer than expected due to a bad wiring loom with switch. basically cut the cheap loom for the wiring and duplicated your blue wire lead. WOW! I had no idea what I was missing at night. When I commute here in Colorado it's early in the AM and I am sure I have passed some deer and elk on the side of the road and didn't know it.
Not anymore! Once again appreciate the great vid. Best of luck to you all.
thanks for making install easy ... Word to others the blue n black wire works, BUT, the bike has to be running if you are checking the wiring or for the light to come on ...
Muy bueno el video, bien explicado y facil de instalar. Lo utilizare para dos leds U3 en mi Super Tenere. Gracias!
Soy de Argentina, Chubut, Comodoro Rivadavia.
Edgardo Muratore me alegro que te sirvio el video. Que bien una super tenere en argentina, no son tan comunes alla no?? Saludos.
Very cool light! Nice to watch master mechanics at work.
Thanks Kelly! One master and two clowns lol
Though I can’t understand half of what your saying I love your videos!! You guys have a lot of fun!! Wish I was down there on some of your camping trips !!
Richard Bowles lol thanks Richard. Yeah man. We try to always make the best of life. Thanks for subbing.
Great light. I have it on my 14 Super Tenere ES as well.
100%
Hey guys,
glad I found your tutorial, helpful enough-ish to me... I was hoping you can explain a little further which circuit was chosen (what that blue cable lights were hooked to does, how to find it... etc)
Thanks again!
Great led nice job.
Thanks Derrick!
Hola Alberto... Estoy atrasado con tus videos... Ya me voy a poner al día... Saludos!!
jejeje, abre una Sante Fe primero. Saludos
Nice install. However, without a switch, and it being 'always on' you're most likely going to be blinding drivers coming towards you, especially at night. If you don't want to use a switch, why not wire into the high beam circuit instead. And since motorcycle lights are always on when the bike is running, having the LED bar, also always on, creates a continuous load (drain) on the bike's electrical system. Anyway, just a thought. Cheers.
holymolie great tips man. Thanks and hope you subscribed. 🍻
Maaan, if guys do any rides near the Carolinas I'll love to join you guys.
THanks man!
Got the same one on my 17 tenere. But I used a harness and switch.
Nice, very inexpensive and does the trick! Thanks for stopping by.
Florida Outdoor Adventures yea no problem! Yea I just added a few pods too. Lol
saludos, desde medellin colombia, hermosa moto xt 1200 z
Viajeros en moto Pulsar Osvaldo y esposa hola amigos. Acabo de regresar de Medellín. Que hermoso lugar. Subí muchos vídeos so los quieres ver. Saludos
Yo tengo puesta la misma en mi moto y ayuda en la noche cuando viajas solo .Saludos de bs as Argentina
Hernan Trejo buenísimo Hernan. De que parte en argentina?
Hola soy de san fernando buenos aires .Saludos
Hernan Trejo 🍻
hey buddy
nice install and sweeeeeet light
I bet it really lights up the road,,,LIKED ( thumbs up )
Alaskan dual sport that light is heading your way 😆
hola como te va, me decis las medidas de largo ancho que tiene este accesorio , y de cuantos watts es el mismo, tengo una super tenere tambien y quiero colocarle uno tambien
nice, my do this to my tenere
Avid Enduro yesss. Nice upgrade
Old thread I know. But I just ordered this light for an ES model. Couple questions: 1) Are you still happy with the light? 2) Was it ok to keep them on without a separate switch? 3) At night do oncoming drivers flash at you because it’s too bright? Thanks. Nice work and great find!!!
very happy, no switch, i want to be seen by oncoming trafffic, cheers.
Thanks.
HELLO, COULD YOU TELL ME WHICH CABLE IS WHERE IT CONNECTS? THE BLUE ONE WHERE TO CONNECT THE CURRENT COVER
Hi to you friend.. Can you please tell me where to buy a similar led light for the same super tenere 1200
Are the plastic holes behind the cover 6 or 8 mm (diameter)? Thanks
Sorry. I dont remember.
Very nicely done. I'm thinking of picking this up for my '17 Super Ten. Does the plastic cover you removed at the beginning of the video fit back on once the light is installed?
PGL PGL im not sure exactly what plastic your asking about. But all fit back together
@@FloridaOutdoorAdv I'm referring to the part that is removed at 0:50 seconds. But if everything went back on then that's what I was really needed to know. Thank you
¿De que tamaño es la barra? ¿de 6 pulgadas o de 8 pulgadas?
Hola, hay esta el link de la luz.
???
How is that legal to ride with bright headlights on all the time? No consideration for others driving on the road.
Few accesories below
Power splitter
www.ebay.com/itm/133580684303
Pigtail
www.ebay.com/itm/133580790479
Plugs
www.ebay.com/itm/133575389052
I bought these using the link provided. What I received is utter rubbish. Do NOT buy using the link provided.