Filling your Hatsan PCP Airgun - Hatsan Hand Pump
Вставка
- Опубліковано 30 лип 2024
- PCP airguns do not need to be a mystery. In fact, they are very easy to shoot and fill, so long you understand the basics. They provide airgunners the most powerful, most accurate, are the easiest to shoot, especially for firearms folks looking to add airguns to their shooting regimen. In this video we discuss the most direct fill method, i.e. using a simple hand pump. The new Hatsan hand pump takes fewer strokes and not includes particle and moisture traps in the handles. If you've ever wanted to know how easy it was to fill up a PCP video, here's your chance.
For more information please visit: www.hatsanusa.com
************************************
AGW / AGWTV Content Disclaimer
************************************
By viewing or flagging this video you are acknowledging and are in full acceptance of the following:
Our videos are strictly for documentary, educational, and entertainment purposes only. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RISK. Treat Airguns as FIREARMS and observe all the same safety considerations as such. Any and all work on airguns should be carried out by a qualified and insured individual. We (including UA-cam) will not be held liable for any injury to yourself or damage to your airguns resulting from attempting anything shown in any of our videos. These videos are free to watch and if anyone attempts to charge for this video notify us immediately.
Links are provided to help viewers connect with products mentioned or used in our videos. AirgunWeb and AirgunWebTV DOES NOT directly sell firearms, airguns, or related parts and/or accessories.
We work closely with all our sponsors and often receive compensation for the content that we create on their behalf which covers the cost of our time and other production costs. This is our job and they are our clients. We do not receive or accept payments that are our would be intended for us to falsely promote or misrepresent products. We recognize that TRUST is the key the integrity of this channel and its content and pledge to only deliver truthful and honest content for you the viewers.
By viewing or flagging this video you are acknowledging the above. - Спорт
Brilliant series of videos.
Being extremely old, I recall having those 'Breakback' air rifles....
I tried the Screw in Gas cylinder pattern air weapons but accuracy is literally 'Hit or miss'. I bought my AT44-10, .22 rifle with a stirrup pump !
I'm much fitter after recharging the high pressure cylinder and this air weapon has consistent accuracy.
Personally I prefer a .22 rimfire but firearms are banned in the UK. The authorities think they're dangerous !
A+ & High 5s for your most informative videos.
My respects. J.S.
My gun gauge don't move... I dunno WHAT I doing wrong
Took me forever to get mine running
I'm looking into a Hand pump for it but learning more about my new Air Rifle before using it
My FlashPup was filled with using proper pump. shoot wonderful for a few hours until the tank needed air, But never charged again, it feels like a hissing of air from the trigger area.
Why isnt my hatsan filling? Air escapes from the sides of the filling hole.
Yeah mine does too
What the hell? No one answered these questions yet. Did you figure it out, Anyone? I can't get the air tank off because the moderator where the barrel flares out gets in the way and jams it in there. Any Ideas, did any of you figure out the fill problem?
Mine too...
Any videos on using a compressor to fill?
Good tip about using the plumbers tape, to prevent any possible air escaping
Ummm, I think you mean use Teflon tape to wrap threads, Plumbers tape is a metal strip about an inch wide with holes in it, used to hang pipes with, usually under a house or floor space.
@@nobodyinparticular5224 Those are called hose clamps my guy
My pump said specifically not to use Teflon tape.
At 2 minutes 37 seconds it is showing the brass fill valve with no o-rings in the grooved slots. Is this correct? Or do o-rings need to go on prior to fill?
hello, I have a Hatsan Flash and a Hatsan pump. the pump after 10 movements is blocked. It creates an overpressure and no longer loads the Flash cylinder. Where's the problem?
So I have a compressor and once I stop filling I stop the compressor and need to bleed the hose. However, If I slowly bleed the compressor the rifle's valve won't close and will vent all the air in the tank. If I rapidly bleed the air from the compressor the piston valve of the compressor will go bad. Could you please tell me what additional valves I need so I can shut the compressor and then bleed the air safely? Thank you!
I have the Quest Nite Ops 22caliber Air Rifle 1100FTPS Break barrel single shot Rifle this New Hatson Blitz 22caliber Air Rifle is my first PCP Air Rifle
Is the air tact pcp? Not much on the 3 types in this line ty
What adapter are you using on your air pump?
I bought that pump a couple months ago and the bleed valve screw broke and there is no way to get a replacement
Do you think its okay to store the Hatsun with 200 bar for long periods? I have to Big Bore Carnivore. 30 caliber.
where do you get this universal fill probe
Spike - 10 pumps for 100 psi is an average. It will be less or it may be more depending on the size of your air chamber. Generally I shoot from 200 bar down to about 120 or so. It's not that bad if you don't drain the cylinder each time you sit down to shoot.
Cheers,
AGW
And about how many shots will you get from 200 to 120?
How many pumps with a stage 4 punp will it take to fill the Hatsan Hercules 500cc × 2 = 1,000cc from empty?
Probably like a 1000
Hi I'm looking at getting the pump and a hatsan rifle does the pump come with the fill probe or is it sold separately
The fill probe comes with the rifle, you screw the probe onto the hose that comes with the pump.
cheers
AGW
My new Hatson Blitz 22caliber Air Rifle says not to remove the tank
where we find hatsan 4 stage pump oring in india any sudjetion.. iam very confused hatsan pump is very bad... why not provide oring in market
Hey rick,how are you? so I'm hoping you can answer a big question for me.I've been trying to find out if I need to be checking my air rifle cylinders for corrosion. I have 3 riffles. one is a bt65.the others are texan 45,and a evanix tactical sniper. my concern is being that I use a hand pump only.how will I know when to check for corrosion because of all the moisture.I'm just concerned because this is allot of pressure I hold up to my face each time I shoot. I love my airguns. .just have some safety concerns because of how I had to have my paintball guns checked for corrosion. anyhow I would really appreciate it if you could look into it for me and give me an answer. .it would really give me piece of mind. .thank you.
+Hugo Ezparza - Check them once a year to be safe.
cheers
AGW
Once a year? How will I do that with certain ones that you can't open like the hatsan ones? Thanks
+Hugo Ezparza - it will depend on the gun.. You'll need to work out the best way with each model. Check with the manufacturers for a better timeline if they have one.
cheers
AGW
hello I was wondering if u may now if this pump will fit my hatsan 22 pcp air rifle
+Joseph Ball - bet on about 10 pumps per 100 psi.. so 3000 psi would be 300 pumps from empty.. Also depends on the size of the tank you are filling.
Cheers
AGW
Hey rick when are you going to be reviewing this rifle!?
Luis Ramirez - When they become available. I believe Hatsan has finally received their first shipment of new products. Should be a fun rest of the year.
Cheers
AGW
Rick, I own a hatsan pump. Says 300 bar on the gauge. Do you know if it will actually pump to 300 bar? thanks in advance.
Electronicdawg - Actually.. not sure.. try contacting HatsanUSA.com and see if they can give you a definitive answer on that one.
Cheers
AGW
Hi, I have the same air weapon. On the side there are details that include the 'Max pressure, 200 Bar'. Usually this is referred to as the 'Safe working pressure'.
My AT44 will not accept pressure over 200 Bar so there must be a safety valve in the pressurisation system ? I cannot pump the pressure above 200 Bar which is the line between the Green (safe) and the red (Danger) quadrants on the Rifle's air pressure indicator.
There is a video that shows how to increase the power of the weapon without increasing the pressure in the pressurised air cylinder.
Trust me, you do not want to be altering the manufacturers spec on air pressures, one slip and can kill you.
Stay safe !
Maybe actually show filling the gun up all the way.
It's no joke. Be ready for a slight workout. He is correct though.
0 to 200 is ridiculous. 100 to 200 is about 5 minutes of pumping like the guy demonstrates. Slow steady pace, use your weight and less arms . If you have the money a high pressure electric pump is the way to go. In saying that. 200 bar with my Hatsun Carnivore 30 caliber gives me 21 rounds. That's not to empty. That's 21 rounds leaving 100 psi in the tank. Shots don't start losing power til around the 7th shot. Then you just need to adjust a little each shot after. Those first 7 are amazing. I was hitting a empty antifreeze jug (size reference) at 100 yards. Very easily. Killed three ground hogs already. I've uploaded one shot on my UA-cam page. A take down of a ground hog living under my wife's shed destroying the ground beneath it. He is gone. Check it out.
Hello pyramid air
Ihave a bull boss 22 cal. and after 15-20 shots I try to top it off while the gauge is still 1/2 green or about 100 bar using a air venturi g6 hand pump. As soon as I insert the probe into the cylinder fill port all the remaining air leaves the cylinder and IT drops all the way down to the yellow .What am I doing wrong? the o rings on the probe are fine and not leaking there.
Also as I am pumping some strokes have very little resistance and others you have to lean into to get the down stroke
Can you help me ? I have tried cocking lever full open and full closed with and without the magazine. Do you know why my gun is doing this all I want to do is top it off after 20 shots while it is still in the green.
Thank You
Kevin Neel
Contact HatsanUSA via their website and their form under warranty and service. They will be able to help you.
cheers
AGW
I have a question.. i just ordered a hatsan bullboss .22 with a hand pump from pyramid air.. my question is do i need too purchase an additional piece or part in order too pump up my rifle? Thanks for any help.
hey rick i have this exact pump but the gauge on the cylinder and the one on the pump show different readings for some reason,is that normal, and if not which reading do i use. thanks in advance.
+Jason E - I would go by the one on the cylinder. Also, send an email to Hatsan to see what they say. They have a form on their site that you can submit.
Cheers
AGW
thanks
hi i own a pcp at44-10 and i love the gun ! but i live in canada and i cant get part for my gun period ! no suport in canada can you help me out ?
gearheadek9 - unfortunately not.. you can try to connect with HatsanUSA.com to see if they have someone you can work with.
Cheers
AGW
Anyone know if the air tank is removable on the Flashpup synthetic ?
i just bought the .25 flashpup and i have the same question u also how many times do you have to pump to fill it from 0
Hey, I recently got my .25 cal invader and then got a compressor, and not sure if it the compressor or air rifle.
Also, this is my first air rifle as I am used to real firearms. I followed the instruction of the Invader and cocked it and connected the airline and then turned on the fan and then the power on the compressor.
I set the bar pressure to 2000 and after 5 minutes there was nothing happening. The gauge on the air rifle and compressor showed zero change. I turned the compressor off but left the fan on per the instructions and opened the bleeder valve and there was barely anything that came out. I then disconnected the airline from the rifle and compressor and plugged back in putting my finger over the fitting on the compressor while it was running to see how much pressure was coming out. Not much at all. So is it the compressor or as I just doing something so stupid I am missing it? Thanks
i just bought the .25 flashpup and i have the same question u also how many times do you have to pump to fill it from 0
Budget about 10 pumps per 100 psi. Give or take the pump and your elevation.
Cheers
AGW
@@AirGunWeb I bought a low budget hand pump on amazon and my Hatsan flash was empty when i got it and it took me around 70 pumps to get it within range.
A just bought a hatsan flashpup s we and for some reason my fill prob seems smaller cause it doesn't build up pressure with my handpump not sure what the prob is can someone help me
I'm literally having the SAME problem. Every time I pump the air just seeps outwad. Maybe its not tight enough, at least from what I've found... I have a flashpup as well. Instructions really do suck, and so does this video. It doesn't touch on any of the nuance of this.
I also clean my air guns after every use
10 pumps = 100 psi? So 290 pumps from empty to get to capacity? And 190 pumps to top off from 1000psi? Yikes! I always wondered what kind of effort needed to go into a PCP to fill one using a hand pump. Thanks Rick!
+Spike Bachman your ratio sucks
What if i fill the cylinder upto max 250 bars?
What pcp airgun is that on the table?
Xander Weemering - at 1:24 in the video: AT44 Tactical Quiet Energy .22 caliber.
Cheers,
AGW
Airgun Expert & Critic - Rick Eutsler / AirgunWeb Do you know when the AT44 Tactical QE will be released? Thanks
Linus884 - look for all the new products to come out sometime in August.
Cheers
AGW
Ok if lookit up
Do you have an air rifle with them look it up on UA-cam Lewis and Clark air rifles
Nothing but problems trying to charge it.
Pump just leaks
Lewis and Clark I want to see this shit. That sounds about as accurate as most or your info
I'm sure he actually meant Winston Churchill. Did you know he got caught smoking marijuana behind the school while in 3rd grade?
I bought one! They send me filling adapter no hole on it. I have to buy one on Amazon. Funny horrible company!
And never use petroleum based lubricants on the pump
No comments or instructions of o rings or insertion or trouble shooting . Next to useless video
What a waste of time