NY State Registration Sticker - How to Stick

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 91

  • @Ms.K001
    @Ms.K001 20 днів тому +3

    Thanks, very helpful. I especially appreciate the time stamps

    • @YeahBuddy
      @YeahBuddy  19 днів тому +1

      You got it! I think there are way better ways to accomplish this task, but I appreciate you watching!

  • @Beroketz
    @Beroketz 5 місяців тому +6

    Just got my registration and had to install it for the first time and didn’t know how! This was everything I needed thanks!

    • @YeahBuddy
      @YeahBuddy  5 місяців тому

      Amazing!!!! Thank you!

  • @TheApolloFund
    @TheApolloFund 2 роки тому +17

    Awesome video! Thanks for sharing! Thought I was the only one who struggled to get that darn sticker off!

    • @YeahBuddy
      @YeahBuddy  2 роки тому +2

      Thanks GWB!

    • @preciouskkk
      @preciouskkk Рік тому +4

      lol, no, you're not. A task surely not for the faint-hearted, lol.

    • @TheApolloFund
      @TheApolloFund Рік тому

      @@preciouskkk 💯 🔥

  • @beauford54
    @beauford54 Рік тому +4

    Well, since it’s cold 9 months of the year here is Syracuse, I usually end up changing all mine during cold weather. Probably easier in direct sun or heat. Just changed mine, and I use multiple razor blades and it still takes about 20 minutes of scraping, goo gone and window cleaner. Was hoping there was a better way, but I can see there is not, lol. Thanks for sharing!

    • @YeahBuddy
      @YeahBuddy  Рік тому

      Thank you for sharing! One viewer commented and swears by razor blades and window cleaner. I wasn’t sure how much better it would work. Seems like not much better based on your attestation. Thanks again for watching and your comment!

  • @AimeDoor
    @AimeDoor Рік тому +3

    what worked for me was using my health insurance card to poke at it until the sticker comes off. once the sticker is off there will be some residual tape around the window still.
    spray the window and residual tape leftover with some windex and use a towel to smoothly wipe over it in a circular motion. all of it comes off in under a minute

    • @YeahBuddy
      @YeahBuddy  Рік тому +1

      Nice! I think that is similar to what I tried, but I’m clearly not as good at this as you :) that said, I think I over relied on muscle and not enough on windex. Thanks for watching and commenting!

  • @amitsalam1
    @amitsalam1 Рік тому +16

    That's overly complicated. Take a razor and get a corner off and the rest of the registration should come off quite easily once you have a grip on the corner. If there are certain pcs that don't come off just use the razor again on another corner. Once the sticker is off, take a rag and rubbing alcohol and rub the adhesive left on your windshield off. If you want you can take some glass cleaner and a dry paper towel and wipe the surface down before you apply the registration.

    • @YeahBuddy
      @YeahBuddy  Рік тому +3

      Thanks Amit! I think I did the second half of your suggestion but failed at the first half. A razor would have been better which I could have pulled from my carpenter’s knife. I ended up scratching with my finger, which worked okay, then using cleaner to get the rest off as well as a paper towel to clean before reapplication.
      Thanks for watching and for your comment!

    • @biggface7
      @biggface7 Рік тому

      Thanks! Just out of curiosity… Why’d you click on this video if you have ya own method 🤔

    • @amitsalam1
      @amitsalam1 Рік тому

      @@biggface7 efficiencies in innovation happen with people adding to it. It doesn’t take anything away from the person who introduced the innovation. (This is how many of the technologies, methods, ideas etc. get to refined state.) The original poster had the right idea I just came along and hopefully helped him to see that a few improvements in certain places can optimize his process. That’s just how things work in life. Someone comes up with an idea and people collaborate to refine it. There’s no attack or malice against the person who introduced it that’s just how innovation works.

    • @papabyrd4289
      @papabyrd4289 Рік тому +1

      @@amitsalam1 Understood. I didn’t think it was any malice. I actually like your method as well. I was just curious what started your initial search of it if you had your own method.

    • @joshgualtier9765
      @joshgualtier9765 Рік тому

      Doesn’t work like that bud

  • @danielabuttini8270
    @danielabuttini8270 5 місяців тому +2

    Part of the difficulty stems from the position. It is more difficult on the driver side because of the steering wheel. In other countries, stickers are applied on the passanger side, it is a lot easier.

    • @YeahBuddy
      @YeahBuddy  5 місяців тому

      100%!!! I had the inspector take it off the second time haha! 😂

  • @BettyWilchek
    @BettyWilchek 3 місяці тому +1

    A Razor Blade Scraper with a Handle is the Best & easiest way to get off an old Registration Sticker. It will also scrape off any excess glue. If you haven't removed the Glue thoroughly off the Glass from previous stickers, the glue eventually will be a bit harder to remove even with a New Blade which should always be used. Put some rubbing alcohol on a paper towel, then put it snug up against the glass, rub a little & it will remove excess glue. Rinse area with water & make sure it's Dry. Then just put your New Sticker on. Keep Scraper in Glove Compartment and your ready for the Next Time.

    • @YeahBuddy
      @YeahBuddy  3 місяці тому +1

      This is a very solid response and way better than my solution!

    • @BettyWilchek
      @BettyWilchek 3 місяці тому

      @@YeahBuddy I think many may not use my method because they may think it will scratch the Glass or something-but it won't at all. They even make the Scrapers with Longer Handles too. Online only 6.00 and up.

    • @YeahBuddy
      @YeahBuddy  3 місяці тому +1

      @@BettyWilchek nice! 👍 I could have pulled a razor from my carpenter knife but thought it may scratch the glass. Very nice!

    • @BettyWilchek
      @BettyWilchek 3 місяці тому

      @@YeahBuddy be safe if using a blade without a handle. Most carpenter knife blades have a slant on each end. The Razor Blade Scraper Handles keep the blade straight, super snug, and tight. The blades are straight and both sides of the blades are straight. (Rectangular shape). The Scraper Handle allows you to use some pressure, and keeps the blades from shifting. 🙌

    • @YeahBuddy
      @YeahBuddy  3 місяці тому

      @@BettyWilchek that seems like the right tool for the job!

  • @mrssandrasinclair2084
    @mrssandrasinclair2084 Рік тому +3

    So far so good

  • @garfieldtroupe6952
    @garfieldtroupe6952 Рік тому +1

    Great video!!! Keep up the good work!!

    • @YeahBuddy
      @YeahBuddy  Рік тому

      Thank you! Much appreciated!

  • @jonwikan3986
    @jonwikan3986 Рік тому +1

    Window scraper from a paint store. Its a razor with a handle. Done in a few seconds clean w acetone or alcohol and off to the races.

  • @shortythepresident3913
    @shortythepresident3913 5 місяців тому +1

    As simple as it may look. Its kinda hard to put on neatly. I got my new registration a month early and i dread putting it on and not mess up. But i'm gonna have to suck it up because the month is nearly up.

  • @purewater69420
    @purewater69420 Рік тому +4

    People complaing about NY registration and placement is pretty astounding to me.
    It's once every 2 years, and it isn't as easy to steal as a license plate sticker

    • @YeahBuddy
      @YeahBuddy  Рік тому

      That’s true! And it’s much cheaper than other states like MN or VA! Thanks for watching!

  • @omniscient7333
    @omniscient7333 Місяць тому +1

    put some dishwaswhing liquid or a cap of vinegar in a small spray bottle with warm water. soak it...and it will come off like butter with a decent razor edge...

    • @YeahBuddy
      @YeahBuddy  Місяць тому

      @@omniscient7333 solid! Definitely a better option than my vid!

  • @shortythepresident3913
    @shortythepresident3913 5 місяців тому +1

    My old mechanis had a tool for it. He did it for me in less than 30 seconds. But they closed down now because he retired. I miss that old sourpuss.

    • @YeahBuddy
      @YeahBuddy  5 місяців тому

      Totally, I started having my mechanics do it. Too much fuss and they are doing inspections anyway.

    • @shortythepresident3913
      @shortythepresident3913 5 місяців тому +1

      @YeahBuddy Seem's like a trivial thing, but nobody wants to drive a car around for the next 2 yrs with ugly regestristration sticker goo all over the windshield.

    • @YeahBuddy
      @YeahBuddy  5 місяців тому

      @@shortythepresident3913 100% 😂

  • @Kate.Nkechi.O
    @Kate.Nkechi.O Місяць тому +1

    Funny enough, I am watching this is September 24. Did you replace it again yet and have you found an easier method?

    • @YeahBuddy
      @YeahBuddy  Місяць тому +1

      @@Kate.Nkechi.O yes! The best way I found was to bring it in for the annual inspection and have the mechanics do it lol

  • @Super6ix06
    @Super6ix06 Рік тому +4

    You should do a video on the EXACT last day before your tags expire. Alot of people including myself don't know if it's the last day of the month or last day of the previous month . Thanks.

    • @YeahBuddy
      @YeahBuddy  Рік тому +1

      I can dig it! Thanks for the suggestion!

    • @robertparker4409
      @robertparker4409 10 місяців тому +1

      In small print, the exact day of expiration along with month and year is displayed on the tag. Like you said, this often goes unnoticed by many.

  • @richardmcnally5998
    @richardmcnally5998 4 місяці тому +1

    Use windex on the residual adhesive - it comes right off.

  • @JayseGreene
    @JayseGreene 4 місяці тому +3

    This is a cute video but not very helpful. What you need are 3 things. 1. A fine-edge thin scraper. 2. Goo-gone. 3. Rubbing alcohol pads or window cleaner (do not use Windex) - You cannot remove sticker residue with glass cleaner, you need goo gone and it will not harm the windshield.

    • @YeahBuddy
      @YeahBuddy  4 місяці тому

      Noooice! Thank you!

  • @radiamehjabin3442
    @radiamehjabin3442 6 місяців тому +1

    In NY do we need to put registration sticker on the license plate or only on windshield ?

    • @YeahBuddy
      @YeahBuddy  6 місяців тому

      Windshield in NY.

  • @alannaalayska9562
    @alannaalayska9562 Рік тому +1

    Wow wish I knew before I repla sx mine today

    • @YeahBuddy
      @YeahBuddy  Рік тому

      Lol! There is always next time….in two years ;) thanks for watching!

  • @AccPhys
    @AccPhys 2 роки тому +12

    thanks; it's admittedly a stupid system with these nys car stickers

    • @YeahBuddy
      @YeahBuddy  2 роки тому

      You are welcome! It is a ridiculous system! Other states you put a sticker on the license plate over last years sticker. Super easy!

    • @biggface7
      @biggface7 Рік тому +1

      DEFINITELY!! Why do we have to register a car more than once makes ZERO sense!! And if they’re going to make us do that, why not have a small barcode sticker placed on the car once and once you re-register the vehicle it gets updated in the system and if need be, the police can just scan it. 🤷🏾‍♂️

  • @johnruck
    @johnruck 4 місяці тому +1

    is there a wrong way like sideways or above registration

    • @YeahBuddy
      @YeahBuddy  4 місяці тому

      I’m sure sideways would be a no go, but not sure if there is anything in statute to that effect. I’ve always seen side by side.

  • @egglebl
    @egglebl Рік тому +4

    This is 2023. Is there no better way to do this?

    • @egglebl
      @egglebl Рік тому +2

      Wait!! On a whim I added some dawn dish detergent to a paper towel, and it cut through the goo on the first pass. The smudge was gone and the sticker region was as clear as glass in 30 seconds. I finished off with some window cleaner and applied the new sticker. Looks professional!

    • @YeahBuddy
      @YeahBuddy  Рік тому +1

      Amazing! Love it! Well done and thank you for watching and commenting!

  • @tonylin9639
    @tonylin9639 Рік тому +1

    Quick question, so I order a duplicate sticker by mistake, and now DMV sent me one original and one replacement windshield sticker. Does anyone know if I have to use the replacement or original or It doesn't matter which one I use?

    • @YeahBuddy
      @YeahBuddy  Рік тому

      Do the numbers match on them? I think you are good. But to be safe, I’d use the replacement. Unless you already stuck the original, then just consider rolling with that unless you hear from someone more legit than me. Thanks for watching and your comment!

    • @tonylin9639
      @tonylin9639 Рік тому

      @@YeahBuddy it's just the top bar code the 6 number and 2 letters on the top is different, other than that, the expiration date and year the VIN and Plate number are exactly the same. Thank you for your reply.

    • @billysmith5721
      @billysmith5721 Рік тому +2

      if you use the wrong inspection sticker, you get 5 years at hard labor in a DMV prison camp.

    • @tonylin9639
      @tonylin9639 Рік тому

      @@billysmith5721 thank god I use the right inspection lol

    • @YeahBuddy
      @YeahBuddy  Рік тому

      @@billysmith5721 stiff penalty, but seems fair…..

  • @di-jt6jp
    @di-jt6jp Рік тому +3

    But I still love New York!

  • @jeancarterlucadet
    @jeancarterlucadet 9 місяців тому +1

    Yeah body 😅😅 Ronnie coleman!

  • @kathleensarachinsky1460
    @kathleensarachinsky1460 Рік тому +1

    Peanut butter !

    • @YeahBuddy
      @YeahBuddy  Рік тому

      Really? I have so many new ways to try this next time!!!

  • @stevenrubio-fo5fw
    @stevenrubio-fo5fw 4 місяці тому +1

    I got a ticket because my sticker won’t stick to the windshield what ficking bozos I have New York traffic cops

    • @YeahBuddy
      @YeahBuddy  4 місяці тому

      That really stinks. They are on it when it comes to handing out tickets. 🎟️

  • @janetleephoto59
    @janetleephoto59 3 місяці тому

    Don’t people usually know how to do what they’re showing how to do before they make a video? 🤔

    • @YeahBuddy
      @YeahBuddy  3 місяці тому

      Sometimes. But sometimes life is a journey. Thanks for watching!

  • @TheStormpoet
    @TheStormpoet Рік тому +1

    Cooking oil dissolves glue... could have helped in that step...

    • @YeahBuddy
      @YeahBuddy  Рік тому

      🤯

    • @YeahBuddy
      @YeahBuddy  Рік тому

      I had no idea gonna test drive that today.

    • @TheStormpoet
      @TheStormpoet Рік тому +1

      @@YeahBuddy a friend in NYC has to do his and showed me your vid... so I thought I'll just add my 61c....

    • @YeahBuddy
      @YeahBuddy  Рік тому +1

      @@TheStormpoet I appreciate it sir! Always want to improve.

  • @haroldbonet6574
    @haroldbonet6574 11 місяців тому

    Use finger nail remover

    • @YeahBuddy
      @YeahBuddy  11 місяців тому +1

      That sounds painful!!!😖 thanks for commenting and watching!

  • @-MrRichBiker1967
    @-MrRichBiker1967 7 місяців тому

    Hey bro is this a joke??

    • @YeahBuddy
      @YeahBuddy  7 місяців тому

      Thanks for watching! Not a joke - seems pretty self explanatory doesn’t it?