SPEED-KINGS INSTALL: GUERRILLA CABLES GAUGE RELOCATION
Вставка
- Опубліковано 28 тра 2019
- Available at WWW.SPEED-KINGSCYCLE.COM
In this video we assemble everything it takes to relocate the speedometer and add a tachometer to a 2014 Dyna StreetBob. Featuring Guerrilla Cable's harness, this install becomes a plug and play endeavor. Make sure to check out WWW.SPEED-KINGSCYCLE.COM to see the possibilities of changing up the gauge orientations for your year and model. Make sure to like and subscribe!
Harley-Davidson Gauge Gasket Part Numbers
Two of: 67104-95
Two of: 67121-95A
Video By: Ryan Loughridge @_loughridge_
Music: www.purple-planet.com - Авто та транспорт
This is the very first thing I wanted to change on my dyna. I like the finished product
Yes sir, that is the right set up for Dynas/FXR's. Thanx for the clip.
Hellll yeah just the vid diy i needed
Thanks mr speed king!
Yes! Cheers and thanks for the video!
Ordered this and the hard case gauge delete pucks. Pretty pumped to be able to see how fast I’m going now! lol (2361) is the part number for the gauge screws if anyone needs them.
100% I'll do this this winter. Awsome video. And I will order all I need at speed kings. Was always happy with all I bought here. Oh and I need a custom saddlemen step up too :)
..und? hast es schon gmacht? I überleg auch grad..!!!
Thank you Steve 🤘🏼🤘🏼🤘🏼🤘🏼
Love it pure entertainment
You’re a funny guy haha entertaining as well as informative
Love your f****** videos dude, the last one convinced me to do the chain drive conversion. I did the gorilla cables about 2 years ago after Harley-Davidson told me I couldn't do dual gauges on my street Bob. With some advice from the dynaholics web page I was able to figure out how to do it, Love the f****** look of dual gauges. Videos are awesome keep it up bro
Ed Green thanks man! If Harley says you can’t do It, It means you definitely can! Hahaha
My Harley shop does it and I'm going to have it done to my 2015 street bob.
@@xyzlne sir, I have a ‘14 FXDB and DEF want to have gauges in my eye line.. did this work out for you?
Just bought this setup for my fxlrs the rear gasket are all out of stock at every Harley dealer that I checked. Bought them on EBay for double the cost. The ones they had were the correct part# 67104-95 but it was labeled Gasket RR Shock and on the video there labeled as Gasket Speedo/Tach, they still worked but I racked my brain on that one.
Also what is the reason that there are holes in the back plate. Is there a specific rotation that it needs to go?
Expensive but worth it. No more looking down.
I'm with you on the gauge placement on the tank it sucks.
Want to do this on my Road King Special 👍
When are you getting these back in stock for the Low Rider S? Thanks..
Great video as always n best in the business Steve.... question, i own a 20 m8 low rider s n thinking about doing this relocation for my bike. I was wondering if you have a video for m8 softail how to video?
I sure hope you have something like that for for Road King FLHR??? Maybe in a single Guage?
What's the deal with bigger hole in the speedo side backing plate? I just received relocation kit, top quality.
2:53 can you mount gagues on the lower part of the riser clamp ? I have windshield that is very close to the risers so if i mount on the top part of the riser clamp it will not fit.
Great vid Steve! Do you have the gauge part number?
Is there a kit to convert a dual gauge to a single? I like some after market gauges that use an analog tach but digital read out of other things in a single gauge. But I have a low rider.
Do you have a mounting system or suggestion for T bar handlebars?
Another awesome video Steve!!! Know where one can find a dual speedo/tach lowering kit for a moto guzzi?
Will this conversion kit work on a dyna switchback?
I’m late to this vid but I DEF want to do a dual gauge relocation on my ‘14 FXDB with T-Bars but the tach is integrated onto a little screen on the speedo.. is it possible for me?
hey guys are these the same gaskets for a fxlrs 2020 relocation you would need?
Hello,
It is an awesome and inspiring video. I ride a 2008 FXDB. I'd like to replace speedo and add tacho, but the ignition starter is located on the handlebar. So? Can I use the same cables that you on your video? Could you write the part's number?
Great! What kind of phone or camera did you film with?
What about the giant hole on the tank?
Do they make something like this for single gauge?
Will this work for 2012 Sportster 48
In case anyone is wondering this gauge housing and gaskets work on 13 Bagger
What about the turn signal indicator lights?
Do u make a kit that fits on a tbar?
Best f@@kin video in this motorcycle business... Steve is the man!!! I am definitely getting this mod from SKC..... Thank you for the awesome video. I have a 2020 M8 softail Low rider S and hope all parts available for my model. Is gasket gauge part number is same for 20 softail LRS?
gotta do this with my 2021 fat bob
Does the ECM know the mileage from the prior speedometer and display it on a new one? I have a whole set up for my 2018 FXBB But I don’t want to unplug anything until I know I can deal with the mileage situation.
Yes that’s stored and will update automagically
Hey man! What risers are those?
Have you done it to a road king yet?
what mirrors are those?
Does this work with a 2010 FXD?
Where do I get those rear gaskets
What does this whole setup cost?
Does this work with harley forty eight?
Do i use my existing gasket and hardware to mount speedo in pod? Do i need new gasket for where the block off plate goes? Do you sell block off plate? Thanks in advance.
We'd recommend getting new gaskets since they are cheap. You'll need to get longer screws for the back plates.
I’d like to do this on my fxfb but I’m not sure how exactly I could set up a dual tach or just keep the single from harley
You could buy one of the gauges (tach) for the FXLR and you’ll have the same style look.
Then just find a gauge mount that works (riser clamp or tbar style clamp)
We offer everything for your bike excepts the gauge. Shoot us a email we can point you in the right direction.
Info@speed-kingscycle.com
Why did the check engine still stay on?
Make a phone bracket for the hole left by the old gauge
Man ran the intro twice lmao.
Where do you buy the pods? I have a very similar set up. Lucky Dave’s lucky 13 bars on a 2016 Street bob
non existent www.Speed-KingsCycle.com
I have an 08 street bob and would love to do this speed king can you please give me a link to the tachometer
Did you ever find the tach? I’m wanting one too
So no need for the wire harness if I’m installing this for a 21 Low Rider S with stock bars?
You still need the harness
So where did the indicator bar (neutral/ brights/ blinker) end up? All incorporated in the gauges now? And did this eliminate the digital tach/ gear readout on your stock speedo?
Did you ever find out? It looks like the lights went to the rpm tach, but I’m not sure. If so, I’d sure like the part number for the tach
@@alexapostolos I did not.. I did forget all about this, thx for the reminder
Looks like the neutral, brights and blinkers appear on the tachometer gauge. I’m thinking the tachometer would probably read on the speedo also. I ordered the set up today
What did you do with the instrument cluster? I dint see you install it anywhere. Neutral light etc
Just did this exact install myself, all of the dash lights display on the new Tach, turn signals, high beam, and neutral. The dash panel is no longer needed
@@ethanreardon2538 where did you get your tach? I can't seem to find it
Would this work for a 2019 HD street bob FXBB? it has the digital but love this look better
Rony Gilot you ever find out if this works on the new FXBB, Wanting to do this all so on my FXBB
If you guys find out let me know. I have 19 st. Bob with T bars. Wanting to do duel gauges.
Anyone know the part number for that street bob tac? Can’t seem to find it?!
I’m looking for it too? It looks like that’s where the blinker and neutral lights go to
Is the tach OEM? If yes, can we get the serial number. If not, where can I ger it?
Yes tach is OEM just call the dealership and they can give you the proper part numbers.
You forgot to mention the new stash spot that was created.
Hedonist - It’s pretty obvious that you put your weed there that he probably didn’t feel the need to mention it.
It's there a kit, for 99 xl1200c Sportster like that?
Yea the 1997-2003 sportster sport came from the factory with it.
What year is that Street Bob? I have a 2011 FXDC and will be converting to a dual gauge set up. But need to do something about my indicator lights. Does harley make gauges for the 2011 where the indicator lights will be in the gauges like in this video? And I didnt see any extra wire extensions for the indicator lights to work with those gauges. Is that because its a newer Dyna with a canbus system and the guerilla cables will allow them to work that way?
Hey, did you end up figuring out the conversion? I was installing new signal lights and a lightbar so I took my tank off so I could more easily pull some wiring through the neck but I can't manage to pull the harness through for the console/speedo like he did in this video (i tried to see if I could locate the connector like he did) but there does not appear to be any slack to actually pull it out, unplug it, and connect the gorilla cables
I have the same bike btw
@@nolancaissie5211 I wound buying the Big Bear Performance buckets and asked them to but a light bar for the FXDC size. However they sent me one with the street bob size cut out. Good thing I had a street bob set of indicator lights. I bought the guerilla cables for the FXDC. Plugged on end into where the original harness. Then used one end of the cables to plug into the speedo and one into the tach. I got a used set of 2009 low rider speedo and tach. Then just spliced the wires from the indicator lights and ran them up to the Street bob indicator light harness and that was that.
hahaha "while you're riding looking hard as fuck..."
What's the part number for the rpm gauge?
part # 67000010
What bar set up is that?
flobrob707 that is Biltwell Murdock Risers with Tracker Bars you can find all that at
www.Speed-KingsCycle.com
Thanks🤘🇺🇸🦅🤘
DONT GET IT FUCKING CONFUSED!!!! DAMN RIGHT!!!!
made in ?
Made in Riverside CA. Unlike the device you are asking from or the vehicle you are driving..
What screws were used homie? Fuck 40 dollars for that shit from hd
Just a hint. If you are in the left lanes, and you are being passed on the right? You are going too slow and in an improper lane. If you are running up someone’s butt in the right lane? You are going too fast. If you are all alone and the cop pulls you over? You are going just right
Race shit! 😂🤙
You guys selling any cool shit to cover the speedometer hole?
Ko có thẩm mĩ.sấu