SPEED-KINGS INSTALL: SPEED-KINGS CHAIN KIT
Вставка
- Опубліковано 5 жов 2024
- Available at WWW.SPEED-KINGSCYCLE.COM
We give you the lowdown on the Speed-Kings sprocket system and the ins and outs of converting to a chain drive from a belt. We also do a run-through on installing a chain drive on a 2014 Dyna. So get your torque wrenches and specialty tools out and follow along.
Video By: Ryan Loughridge @_loughridge_
Music: www.purple-plan...
This guys is HILARIOUS! That comment about the belt and removing the outer and inner primary. I love it
Best Chain Conversion Video our there for sure! Been waiting weeks for this video to drop and wow! Definitely worth the wait!
FreeOutrider Brapp Wrist Entertainment thanks man!
Love the video man! You guys killed it as always! Teaching us all to get a manual! 🙌 Keep pumping these videos out! They are great
Andrew Petrie 🙏🏻🙏🏻
Andrew Petrie 🙏🏻🙏🏻
Not a mechanic either! I just like to do my own shit!! So far this is the best “I’m going to do this, so you can fuckin do it yourself” video. Keep cranking these videos dude.
Ordered the star kit for my 2016 FXDLS this morning! Can't wait!
As if the products weren't awesome enough to make you buy them.....this guy is awesome. I love watching his product videos, always makes me laugh
You are PHUCKING great at this shit.. the video part i mean.. yes.. moto too.. but im really stoked on your channel Steve
Topsnap Podcast thanks man!
Awesome project and video! Would be epic to see a video for how to install on a sporty as well!!
AJ Kammerer one model at a time boss.
Hey man is it bad I already put one of your chain drives on then watched the video anyway because they are unreal! Haha a little trick is to slip a cable tie around the primary chain adjuster first before pulling it off, holding tension on it so it's not as fiddly when putting back in! Keep up the good work
Awesome video brother . How long does this take you from start to finish without filming . Would rather pay my mechanic to do this job instead of dealing with special tools etc .
Dude I love the video!! You talk just like do if something is fucking stupid you say its fucking stupid lol love it!!
Well done
Very helpful.. Great videos you put out.. I have a question, while tighten up the chain tenstion or adj the wheel, could the small holes help that are on the dyna swing arm? Ive used them to adj my tire.
K Yaz I prefer to adjust by feel personally.
Any chance I could get some info on that sissy bar setup? Great videos btw! Big fan!
How did you lock that pulley? I've been having a hell of a time with the mainshaft nut. That thing is welded on!
yo.. so i follows this to a T but i have zero slack in the chain...? How much am i shooting for bc like i said i have none and the axle adjusters are damn near all the way out?!
Same issue what was your fix?
Can you offer a steel sprocket with your locking system?
i have a question, how many miles can do the front sprocket in a normal use??
Video was well done!!! and very informative. Thank you for the how to. You make that look so easy, do you mind marking down on your link what socket sizes to get and other special tools and where to get them to do this job?
And this is why I ordered my pegs and arp bolts from you guys! 👌🪄
i was gonna order a 24t front and 47t rear sprocket but you's dont have that for a sportster
How does your locking system compare to Hard case bolt lock-r? Reason I ask is I had Hard case lock-r and my bolts still backed out and snapped... might have to give this system a try🤔 awesome video by the way🤟
MannyMoto all bolt locking systems are preventative and never guaranteed. Red loctite, proper torque spec and only using the bolt one time is also recommended. We have never had a system back out on us using these methods.
@@speed-kingscycle7390 ✔✔✔ done all of the above with no luck😭 I'll be trying your system out in the near future maybe that'll be the secret sauce👊
when will these be back in stock ?
where'd you pick up the Main shaft socket?
what size thread restorererrrr bit was that
I’m wondering the same exact questions your asking!!
What’s the maintenance on that? Can I still use the belt guard with it so I don’t get grease flinging all over. Nice video.
Angel Ortiz yes you can
Speed-Kings Cycle on your site now looking to get the setup for my 16 low rider S. Don’t see the socket n tools on the sight though.
Will it work with a 520 chain on new Sportster 883?
What is the brand and model of the impact tool you used for the main shaft socket? I need 1..lol
d gnarly video talks about It. Check It out.
Do you ship to the UK?
Do you have this kind of setup for 2017 Road King M8?
We have Cush drive chain kits for touring models.
Any idea if the install is similar on the M8 softails?
gisoid yes very similar. I would still get a manual for your bike. M8 motors have different fluid levels and a couple small changes.
Have a link to it? I checked the website and couldn’t find it.
Dyllan Hernandez what bike you looking for boss?
08s sportster
Giant fucking socket... get on one on EBay??? What size Giant fucking socket? Thanks for the video and if I could get that socket size would be rad!!
look good unfortunately not available...
Hi, where could i get the manual from to do the install. You mentioned eBay but I’ve had no luck, do you have a name for it? Assume no the regular manual? Thanks
Clymer i think, but search " 'your bike' service manual reddit " and see if there's a download floating around. I downloaded my sportster one from there, for free
Any chance of chain conversion kit for a street 500 ?
Never use aluminum sprockets, ever.
i have grandkids that like harleys and youtube but language is an issue,so youtube clean him up or get him off the air...
Joe Singletary Take your lame ass the fuck out of here! If your greatest worry in this world is fucking language you’ve got your priorities fucked. Teach your grand kids to accept people for who they are stop trying to censor the world. This political correct bullshit has to end. If your offended, GOOD! You don’t like It, then leave! I don’t come to your business and tell you how to do your job.
Fuck you Joe.
A shame u should be, a harley owner ..pfffff lol trade it in for a vespa damn commie soy boy lol
Does this kit come with the primary gaskets?