If your battery is drained this will not solve that 😂😂🪦. I liked that review segment by Krystal! I’ve been talking about this thing non stop since I put it it 😂 worth it
These types of solutions are why I waited several years before buying my Stelvio! If Alfa doesn't figure out a solution to problems, very smart people like you guys will. Also I love seeing a husband/wife duo have so much fun bringing help and knowledge to masses. Thanks for what you do!
Ordered mine today, I had this code come up last year and been fighting with it since, I had bent my waste gate arm to remove the play and it did solve the problem for a while but now I hear the rattle again and happy you guys had the arm in stock! 🙌
"do a dallop of daisy"....fyi...use a small magnet while removing c-clips literally hold it against the clip during removal...I typically have one handy hanging from the hood release overhead as a justincase while working with small parts....nice vid- thanks for sharing !
That’s kool I’m buying one now madness told me to check you guys out, bought a hybrid turbo waiting for it, I already feel a lil wiggle on stock non modded turbo no codes yet so future proof 😊
I got this wastegate actuator arm for my 2018 Stelvio and installed it but I have a problem with the spring (mentioned in the video at 9:00) - can anyone assist? I can't see where the other end of the spring fits into the turbo unit - I can't see any hole to slot it into (of course, I see the hole in the actuator arm that the other end goes into) - can anyone let me know where the hole for the spring, or a trick to locate it? My Stelvio model has less room to work than the model in the video, so it's a tight space to work in and tough to see much. Also, I dropped the spring into the engine 😩 and not sure if I will be able to retrieve it - does anyone know how I could get a similar replacement spring? Thanks in advance...
Yall are sooo GOATED for this because I've been looking all over to get a replacement wastegate actuator arm for two months and I was really debating on just getting a brand new turbo when nothing is wrong besides the worn arm. This just saved me soo much money😭😭
Great vid as usual, much thanks! Hey, even with your warnings i lost the back C-clip (putting it back on). I ended up using the twisted-wire-around-the-slotted-pin-solution and seems to be holding but would like to fix it right eventually. Any idea on the part number or dim's to get a replacement (this is the larger one towards the fire-wall.)? Great mod and eliminated some of the turbo-lag/SLow-throttle-response that i was experiencing and made it feel like a new car (did this for a '18 stelvio)
I replaced mine with one from Ebay, the P0299 and P0440 went away for 2 months, (it was coming on every other day) and then last week all of a sudden, it came on again!! Also, I've been getting P0440 (EVAP leak)... SO I replaced the fuel cap... It seems right now that both of these codes are coming on at the exact same time (P0299, P0440). Could these 2 codes be connected to each other?
My Giulia has the same issue, a worn wastegate arm. My Giulia had the turbo under boost code and the Alfa dealer said it was an electronic coolant pump and replaced that. I might just replace the wastegate arm anyway
Looking to do the alfissimo tune, bc u guys i just need to fix my turbo arm which i have and new rotors and ebc pads i have the pads already, and fix my oil separatetor which is common with a 2017 at 101250 miles 😅
Isnt waste gate valve bushing itself that worns out? I mean mine was wearing more there before I upgraded to JTDPerformance.I think I was close to start receiving CELs.....
I’m having problems putting it on like the aftermarket part just doesn’t fit ik it says exact meseaure meant but I’ve literally smacked it with a hammer it doesn’t go on
@ when you put yours on did yours fall right in place or did u have to like jam it in their ,cause im trying to push it down with a screwdriver n it just doesn’t go down 😂 like both holes are in place just the tool doesn’t go down no matter how hard I smack it 😭
Another helpful video guys...sorry for tagging you so much on facebook...just seems like people keep asking for products that you sell....so I keep taggin yall...lol
If your battery is drained this will not solve that 😂😂🪦. I liked that review segment by Krystal! I’ve been talking about this thing non stop since I put it it 😂 worth it
And if your battery is dead or dying you will get a sound like a lawn mower. I learned that the hard way.
These types of solutions are why I waited several years before buying my Stelvio! If Alfa doesn't figure out a solution to problems, very smart people like you guys will. Also I love seeing a husband/wife duo have so much fun bringing help and knowledge to masses. Thanks for what you do!
Ordered mine today, I had this code come up last year and been fighting with it since, I had bent my waste gate arm to remove the play and it did solve the problem for a while but now I hear the rattle again and happy you guys had the arm in stock! 🙌
Did this fix the issue
It pains me to see tools just lying on the paint.
lol you’ll live
@@ModdedMotors Nah he died after that comment RIP
You probably don't want to look at my paint then 😂 horrendous
I was twitching just watching that
Not just lying but repeatedly putting them to up and down 😮
"do a dallop of daisy"....fyi...use a small magnet while removing c-clips literally hold it against the clip during removal...I typically have one handy hanging from the hood release overhead as a justincase while working with small parts....nice vid- thanks for sharing !
Love it. Super simple fix with rewarding results!
That’s kool I’m buying one now madness told me to check you guys out, bought a hybrid turbo waiting for it, I already feel a lil wiggle on stock non modded turbo no codes yet so future proof 😊
You guys are awesome!
Do you happen to have a tutorial on how to replace the oil feed o-ring on the turbo?
I got this wastegate actuator arm for my 2018 Stelvio and installed it but I have a problem with the spring (mentioned in the video at 9:00) - can anyone assist? I can't see where the other end of the spring fits into the turbo unit - I can't see any hole to slot it into (of course, I see the hole in the actuator arm that the other end goes into) - can anyone let me know where the hole for the spring, or a trick to locate it? My Stelvio model has less room to work than the model in the video, so it's a tight space to work in and tough to see much. Also, I dropped the spring into the engine 😩 and not sure if I will be able to retrieve it - does anyone know how I could get a similar replacement spring? Thanks in advance...
Yall are sooo GOATED for this because I've been looking all over to get a replacement wastegate actuator arm for two months and I was really debating on just getting a brand new turbo when nothing is wrong besides the worn arm. This just saved me soo much money😭😭
Great vid as usual, much thanks! Hey, even with your warnings i lost the back C-clip (putting it back on). I ended up using the twisted-wire-around-the-slotted-pin-solution and seems to be holding but would like to fix it right eventually. Any idea on the part number or dim's to get a replacement (this is the larger one towards the fire-wall.)? Great mod and eliminated some of the turbo-lag/SLow-throttle-response that i was experiencing and made it feel like a new car (did this for a '18 stelvio)
I believe this might be a good option:
www.amazon.com/dp/B08SJ6LJN2/ref=cm_sw_r_as_gl_api_gl_i_5Y265902G4Q077T6X69J?linkCode=ml1&tag=eric0bd1-20
who puts their tools on the car? imagine putting so much money on a car and not carrying about the paint 🤦🏽
@@Delcore2006 imagine having a replacement on the way…
That circlip if it's loose, it may pop off soon. I would compress a bit both legs of that clip with a plier and reinsert it.
@@19mati67 100% mine did take a lot of force to get out so in the future probably will if I ever have to do this again
I replaced mine with one from Ebay, the P0299 and P0440 went away for 2 months, (it was coming on every other day) and then last week all of a sudden, it came on again!! Also, I've been getting P0440 (EVAP leak)... SO I replaced the fuel cap... It seems right now that both of these codes are coming on at the exact same time (P0299, P0440). Could these 2 codes be connected to each other?
Damn, I find this video after I replace my turbo
My Giulia has the same issue, a worn wastegate arm. My Giulia had the turbo under boost code and the Alfa dealer said it was an electronic coolant pump and replaced that. I might just replace the wastegate arm anyway
@@grxve___ such a weird problem to have, shouldn’t be going out at 50-60k miles.
i’m having problems pulling the heat shield up high enough to access the clips in the back. how hard did you have to pull up?
I ended up doing the bushing trick on mine, but wish this exsisted when I did that.
I ordered the part
Truly appreciate the support!
Did this fix your issue
Looking to do the alfissimo tune, bc u guys i just need to fix my turbo arm which i have and new rotors and ebc pads i have the pads already, and fix my oil separatetor which is common with a 2017 at 101250 miles 😅
The design can be improved with two bearings on each sides
😂. If your tire is flat this will not solve it. 😂😂
💀💀💀 my damn tires, I gotta drive my car more
nothing wrong with the price if you consider the alternative!!!
Isnt waste gate valve bushing itself that worns out? I mean mine was wearing more there before I upgraded to JTDPerformance.I think I was close to start receiving CELs.....
I’m having problems putting it on like the aftermarket part just doesn’t fit ik it says exact meseaure meant but I’ve literally smacked it with a hammer it doesn’t go on
Did you purchase from us? If so email us with your order number with more info.
@ I didn’t order from u guy 😭
@@wok4timez393 So sorry to hear you’re having issues. If you wanted to rebuy with us I can give you a discount. Just email us if you want to.
@ when you put yours on did yours fall right in place or did u have to like jam it in their ,cause im trying to push it down with a screwdriver n it just doesn’t go down 😂 like both holes are in place just the tool doesn’t go down no matter how hard I smack it 😭
Slicing and dicing…QV life 🍀😂 and yep, a “dollop will do ya!” 🤭
Another helpful video guys...sorry for tagging you so much on facebook...just seems like people keep asking for products that you sell....so I keep taggin yall...lol
Leider liefert Moddedwear nicht nach Europa/Austria. Echt schade !
Where do you live?? I’m in Austin Texas
Gotta do the yellow