Hey so for my airlift my psi drops as I park and leave the car turned off and there's no air coming out of any of my bags but the psi drops can someone tell me why and how do I fix that
I got the 3p air ride and I’m new to all this. Is the controller screen supposed to stay on? Or is it supposed to dim/turn off after a certain amount of time? Thanks.
Miggy EK4_FB6 do you mean is it supposed to stay on once the car is off? If that’s what you’re referring to, no. If it’s while you’re driving and stuff, yes but that can be adjusted in settings
Miggy EK4_FB6 I have the same problem which I’ve been too lazy to fix. Your power wire for the bags is connected to a fuse receiving constant power meaning it’s on all the time even if the car is off. You need to get it connected to a fuse that only receives power when the car is on. If you don’t get it fixed, it’ll start to drain your battery
Sergi Rodas okay thanks. Do you have an after market exhaust? If you do how are you avoiding the exhaust piping from touching the rear passenger bag? Mine is, I don’t know if its because of my 3 inch full cat back piping?
@@MrNiceGuyGTL there's a release button that cleans out the lines. When it gets cold you should press is once a week so it gets the condensation out. You're able to lower it when its winter.
Nathan Machado If you have it set to maintain a certain PSI then it will adjust while you are driving. I would not recommend airing out all the way while driving though.
Question, why is it whenever i saved my ride height right, when i air out and then press the ride height, the saved setting doesn't saved cause my ride height all messed up, like front be soo low its on the tire and the rear is all up.
Cause you probably have sleeve in the front and since there’s weight in the front you have to air up all the way first so your bags settle and then you put your ride height is gonna be like a clunking sound and if its not that than idk but that’s what i do to not have that problem
Is there a way to keep it in preset mode even if I shit off the car, everytime I get in it says manual in the top left and it's not aired to the presets
Tylor Dowell if you update the firmware, it will ask you which orientation you want the screen to be. So maybe try updating firmware then selecting “horizontal”
@@ShumileSwift It all depends on the bags, for mine the front are max 150 psi and the rear are 125 psi max. (They might be rated for more but that's what the manual lists for max PSI.)
Arun Proothi i only ever do it when my car is stopped. Of course the controller will do whatever command you give it but it wouldn’t be the safest thing to do it while moving.
Hello, when you have aired out and leave it down over night. Does your tank decrease in PSI? For example when I air out and start up my tank psi are low and then fills up to normal. Is it suppose to loose pressure when parked?
+Sergi Rodas thanks also the manuel said the threads cant be showing on the shocks, out of the box they came all the way up. Do i have to adjust them all the way down until they aren’t showing? It would be great if you could send me some pictures and info of your setup since you have had these for a while already
Can't wait to get mine. Bag Riders hasn't given me my shipping confirmation yet ☹️ haha
Hey so for my airlift my psi drops as I park and leave the car turned off and there's no air coming out of any of my bags but the psi drops can someone tell me why and how do I fix that
Thanks for that helpful video 🙏
How is your compressor that quiet? Did you use something to suppress the sound?
It all depends on how u route the exhaust hose. I just got mine installed today
How would you know what the proper ride height is ?
How do you put the manifold into pairing mode for Bluetooth for your phone?
Good video how do you set rise to start???
I got the 3p air ride and I’m new to all this. Is the controller screen supposed to stay on? Or is it supposed to dim/turn off after a certain amount of time? Thanks.
Miggy EK4_FB6 do you mean is it supposed to stay on once the car is off? If that’s what you’re referring to, no. If it’s while you’re driving and stuff, yes but that can be adjusted in settings
Sergi Rodas my screen stays lit all night with my ignition off. I don’t know if that’s normal or not.
Miggy EK4_FB6 I have the same problem which I’ve been too lazy to fix. Your power wire for the bags is connected to a fuse receiving constant power meaning it’s on all the time even if the car is off. You need to get it connected to a fuse that only receives power when the car is on. If you don’t get it fixed, it’ll start to drain your battery
Sergi Rodas okay thanks. Do you have an after market exhaust? If you do how are you avoiding the exhaust piping from touching the rear passenger bag? Mine is, I don’t know if its because of my 3 inch full cat back piping?
Miggy EK4_FB6 i do have a 3 inch cat back. Gotta heat it up and bend it. I also have some heat wrap around it
Bag rider was delay from snow storm great company
Rise on star is on but not doing anything wen i turn my car on do you know why ?
Just got Air Lift 3P...a lot to learn still.....1 question. When I'm parked for 8 to 16 hours is it ok to leave it air'd a the way out ?
KK Prince yes it is, unless its winter and cold. If condensation get into your lines and it freezes you wont be able to air up and drive.
@@SwtLeo oh jeeze...thank u I appreciate your response!!
Ok so basically stay aired up in winter?
@@MrNiceGuyGTL there's a release button that cleans out the lines. When it gets cold you should press is once a week so it gets the condensation out. You're able to lower it when its winter.
@@dragswolf8 wheres the release button?
How do you put the manifold in pairing mode?
Did you ever get an answer to your question?? Cause I have the same problem. It says put the manifold in pairing mode and I don’t know how to do it
Can you drive the car while the tank is filling or while the bags are adjusting ?
I always wait for every thing to be at my preset. You can drive while tank is filling back up
Nathan Machado If you have it set to maintain a certain PSI then it will adjust while you are driving. I would not recommend airing out all the way while driving though.
I cant get top button or very bottom button to change pre sets only the 3 middle buttons let me set pre sets
Top button is only to air all the way up or until you let go. Bottom button is only to air all the way out to 0 PSI
Very helpful thank you
How do you commit to your phone ?
Question, why is it whenever i saved my ride height right, when i air out and then press the ride height, the saved setting doesn't saved cause my ride height all messed up, like front be soo low its on the tire and the rear is all up.
Cause you probably have sleeve in the front and since there’s weight in the front you have to air up all the way first so your bags settle and then you put your ride height is gonna be like a clunking sound and if its not that than idk but that’s what i do to not have that problem
*So what difference does having 200psi in the tank do? Compared to 150 175 200?*
you have more pressure in the tank
@@xtocy96 😂😂
Bro how do you set up "raise on start" ? I tuned it on but when i start the car it doesn't do anything
You have to have it on a preset before you shut the car off, if you manually aired up or down before then it won’t raise on start.
gillixexik but I unplug the controller because it holds power getting it re-wired this week
How do you adjust minimum tank settings before the compressor turns on. My turns on if the tank drops 15psi
Is there a way to keep it in preset mode even if I shit off the car, everytime I get in it says manual in the top left and it's not aired to the presets
Do you know how to turn the screen horizontal ?
Been asking everywhere. Still no answer.
Any chance you found an answer to rotating the screen?
Tylor Dowell if you update the firmware, it will ask you which orientation you want the screen to be. So maybe try updating firmware then selecting “horizontal”
Need to do via app only
@@TheLocalBikeGuy You probably found it by now but you can undo 2 screws a the back of the controller pop out the button pad and rotate it.
Hey man my controller is stuck in manual mode is there anyway to get out of manual mode
Why does my preset numbers not display on the different presets in green.
How much psi are the bags rated for?
Robert Reyes hi rob, great minds think alike.
@@ShumileSwift It all depends on the bags, for mine the front are max 150 psi and the rear are 125 psi max. (They might be rated for more but that's what the manual lists for max PSI.)
Hey man, Im asking for my dad, whenever he turns of his car, the pressure drops to 0 (with an hour or so), happen to know why?
Sounds like their may be a leak somewhere. I’d check the air lines and bags for leaks
Who you set the drop setting
Do a video on how to Bluetooth to your phone. I can't get mine to pair
I’m having the same problem and now my controller says no ecu and changed to manual mode
So you cant drop just the front or just the rear it lifts all of them at once
You can but you will have to use the corner buttons instead of the preset
Completely new to this, so might be a stupid question. What speeds can you adjust ride height. Obviously you wouldn’t air out on a highway etc
Arun Proothi i only ever do it when my car is stopped. Of course the controller will do whatever command you give it but it wouldn’t be the safest thing to do it while moving.
Hello, when you have aired out and leave it down over night. Does your tank decrease in PSI? For example when I air out and start up my tank psi are low and then fills up to normal. Is it suppose to loose pressure when parked?
That means you have an air leak somewhere in your tank. Check all plugs/fittings on your tank
What’s a good pressure to avoid speed ramps and normal driving new to this thanks
Does it work for Hellcats?
Is the highest ride height, as if you had no modifications (as from factory)?
Max psi for the bags is 125 I believe. So I personally wouldn’t put more than 80-100. But every vehicles system is different
No it goes higher. Before it became popular it was used in snowy conditions to allow cars to be higher than stock
Is there a mode to get it to our out on its own when parked/car turned off ?
+Sergi Rodas thanks also if you remember the instructions say i cant have thread showing on the coil. Do i have to adjust it all the way down?
+Sergi Rodas thanks also the manuel said the threads cant be showing on the shocks, out of the box they came all the way up. Do i have to adjust them all the way down until they aren’t showing? It would be great if you could send me some pictures and info of your setup since you have had these for a while already