Airlift Performance 3P or 3H: Controller With All The Settings Review! Part 3
Вставка
- Опубліковано 28 вер 2024
- ►Subscribe to my channel for new videos, the build of my Si, vlogs and everything else that I record and share with you. :)
Recommend
I highly recommend that when you get the Airlift Performance kit for your car that you get 2 compressors.
Recommend
I also highly recommend that you get the compressor isolator kit to help with the compressor noise and vibration from the compressors
► Link to where you can buy the Air lift Performance kit and view the options vvv
d2bdmotorwerks....
►Compressor Isolator Kit
www.airliftper...
►Don't forget to leave a 'Like' and Subscribe! :)
►Instagram: @EvilStreetShark
Follow me and subscribe for more updates on new content! :)
shoulda made a plan on what topics you're gonna go into and how you're gonna explain things coz this video could have been 5mins in length instead of 18...
I wanted to make the video very detail orientated because there is a lot of settings on the controller and some settings a lot of people don't know about.
@@EvilStreetShark Great job on explaining the detailed aspects on use of the system. I really appreciated the in-depth information because I purchased this system and I pick my car up in a few days.
New to the channel can't wait to watch more videos. I plan on bagging an si one day and this is the perfect channel to take some notes down on !
How many times can you say "present", instead of "preset". Great video other than the constant mispronunciation of that word lol
I lost it at Front Left, Front Right, Right Left, Right Right haha
Yes! I meant to say rear right and rear left. It was cold af outside recording.
You mean the middle button is the present ride height. The 5 selection is the presets
Bro it literally says Preset and you said present everytime preset was there like damn like he said great video other than that shit
@@unstopp i knew it was coming and it still killed me
Can you show you to setup the 2nd compressor wiring harness?
Sorry i fell asleep half way thru 😩
This was like one of the first videos I made in the winter and talking to the camera etc..
Question…my blazer seems not to even in height all around, so in front …for example , in order to get driver side even with passenger side , passenger side is at 80 psi and passenger side is 96 psi, I set that at ride height, but the brain “ module “ equalizes both sides to say “98psi” is that normal? Thanks jg
Great video bro!! I’m so new to airlift, did you do a video for rise to start??? That’s what I need
Question how meany presets are there because when I look it up it’s says five what I want to do is set the aired out button to 5 psi
There is 5 presets and you set the air out button to wherever you want to car to air out to without damaging your car fenders etc
Hey bro it never reaches the correct preset pressures the first time I touch it, I have to touch it 4 or 6 times that's the only thing I hate how can I fix that, that the car only fits the first time?
Old video. But how do I make it air up and air down at the same time?? I
Double tap the air up quick and then down tap the air out right after quick
EvilStreetShark I mean more like when I’m airing up the front and back doesn’t air up at the same time.. or like when I air out it goes front first then rear.. I want them to move togethrr
my controller is stuck on manual mode, how do i change it so that i can set presets?
Do save a preset! After you select what psi you want in each bag... "Hold down the preset button to save the preset*
Nice video man, quick question if I'm going to use the car for a week or may be go on a vacation for a month what position do I leave the car at! Should I air it out completely or keep it at stock ride hieght and what's the minimum psi I should maintain when leaving the car Aired out for a long time? I just bought my 3p kit and I'm still a newbie to this. Thanks
Thanks! You can keep the car at the ride height or aired out.. I would keep the car at the ride height.. So you can see if the car bags are leaking or not... but everything should be fine!! It doesn't matter what psi you have the car aired out at..
EvilStreetShark perfect thanks man, anything thing else I need to keep in mind apart from draining the tank. I live in a place where the temp is around 100° for 8 months a year
Np! Nope! Yes, continue to drain the tank and watch your psi for the tank for leaks!
@@EvilStreetShark hey what if when i air out 3 of the bags say 0 on the controller and the other one is also aired out but says there is anywhere from 10 psi to 30 psi is that still ok?
How do you get out of manual mode
It's only a manual mode if you don't have a preset saved..
So if you have a present ride height it will say that..
If you add like 2 more psi in the front bag...
Of course it will go to manual mode because its not the ride height
Bro how do I save presets? I'm on manual mode and i don't know how to save preset lol what do i press? thanks!
Anyone know how to rotate the screen on the remote? Example: watching UA-cam video on phone straight up and down is portrait view, turn phone to right for widescreen. I need the widescreen or landscape view. Thanks
All these features come with the kit or is it additional?
Yes! These controller settings comes with the 3P or 3H!
Good video homie. Who install the kit for you?
A local airlift installer in my area..
EvilStreetShark how much did they charge?
I'm still learning
I have just fitted my brand new 3p management with new bagss all round, all is fine, but I can't connect my phone to the controller.
I have all the Bluetooth turned on. On the phone and the 3p handset,tried the 3 seconds on, 3 seconds off then on again, but no luck.
Tried to find it via the Bluetooth on the phone and on the app. I'm using a Samsung galaxy s10 on android.
Could you advice anything I could try to get it to connect up.
Make sure the bluetooth settings on the airlift controller is on and its set to 3p in the settings
Also check the airlift andriod app settings to make sure the bluetooth is turned on..
@@EvilStreetShark how do you mean set to 3p in settings?
@@EvilStreetShark can't see a setting in the app about Bluetooth?
@@gazzasbike Yes, Make sure its under 3p settings and then check the bluetooth.. I believe you can check the app as well to see if bluetooth is turn on and of course make sure phone bluetooth is turned on..
How big is the controller? dimensions l x w x h
Do all come with a controller?
Klaxp as long as you get the airlift management system
Write a script before recording... your video would of ended in 5 mins
"Front left, Front right, Right left, Right right" lol
I just got my Infiniti q50 with the same system when I get to 70 + mph it gets really shakey and when I hit bumps it’s really bouncy I have both front at 125 an both rear at 60 wondering what is the sweat spot to help with those problem ms
What is your dampers adjusted too?
12:04 You said right left and right right lol.
Thanks for showing off the settings on the controller man.
I'm choosing this over Accuair due to the option to horizontally mount it.
First 3 min you just repeat everything from beginning
This was my early times on youtube where people starting vlogging! Do you want me to make new videos on everything?
Great video. Thanks for taking the time to make it.
Np!
Is there a video about calibration?
I'm looking for that video myself also
Hello, I'm in Australia and I'm throwing a error on my height sensors. Wondering if I could send you photos? I have a high limit issue. But my wheels can't be completely aired out. I think I need stock wheels to calibrate it
Dm me on IG @Evilstreetshark
My Psi can't be read by the controller. Why is that? And I get stuck at Step 11 in calibration. PLEASE Help
What is step 11 calibration?
If you currently have the 3p system. What needs to be bought or upgraded to make it all a 3H system...
For the 3H you just need the height sensors and the 4 cords that plug into the sensors that runs into the main harness thats it.
Very helpful! Thank you
While I driving my setup is lock… how to change this features ? :-(
how much money cost the Air Lift Performance 3H ?
3H $3,800 but black friday or holiday $3,200
Thanks 🙂
What made you go with this instead of accuairs elevel?
I went with the Airlift Performance kit because the price for the accuair elevel is a lot more and airlift performance front and rear struts are mainly based off the OEM struts from the factory so there is no issues.. If you go on accuair page you will see that they don't have a lot of kits for a lot of the make and model cars compared to Airlift Performance which makes the process easy..
EvilStreetShark ah gotcha. I'm not buying a whole kit from either. I'm just doing their air management system. So the elevel vs the 3h/3p system. I have a truck.
Great video I am trying to get my car using P3 to rise on start but no joy at the moment can you take me through the steps ? Rise on start is in the on position 🤷🏾♂️
you need to connect to bluetooth
I have to set up and it’s a nightmare to figure out too much
duty cycle, ah yes this is the duty cycle.
I'm having issues with my 3p
After having it for so long what do you think about it? Do you still have it on your car or have you taken it off? How long did you have it on your car for?
Has the manifold broken down because theres plenty of videos of them breaking down?
I was thinking of buying airlift
I still have it on the car all this time! The manifold had a small leak and the manifold has a lifetime warranty! They sent me a new one! Everything is fine!
why you make the video inside the car,with out showing the kit actually working.
The kit has a lot of settings and I wanted to share that with everyone and it was cold to stand outside with the controller