RSX TURBO INSTALL- PART 1
Вставка
- Опубліковано 5 вер 2024
- RSX gets turbo mocked up and test fit and we got vital Information. Please subscribers and share!
Turbo used 😎
Street-Performance GT35: bit.ly/3M3bQGa
Standard-Performance GT35: bit.ly/3EaMXGN
Discount code- THC 10% off on all orders
Jackspnaia racing website
jackspaniaraci...
Discount code TXHONDACHANNEL
Copyright free music info by Kingshock
/ @garden_state_grandeur
/ gardenstaterecordsllc
Click here to subscribe to my other Channel for 100K subscriber giveaway!
/ jamesdguy
Message me if you need to reach out! I'm here to help however i can!
texashondachannel
For merch contact me at
moore_motor_sports@yahoo.com
/ texashondachannel
texashondachannel For faster response use instagram.
Follow on tiktok @ texashondachannel
Here is a link to my other channel
tinyurl.com/y2...
Here is a link to my Instagram
/ texashondachannel
If you wanna donate to the build here is a link
ANYTHING HELPS ME GIVE BACK TO Y'ALL!
paypal.me/moore...
LIKE AND SUBSCRIBE! IT HELPS THE CHANNEL A LOT!!! GOD BLESS
#rsx #turborsx #turbo
Been waiting for this.
You and me both!
yes finally 🙌 👏
Right! That’s what im saying! Unfortunately now more waiting
Looks great!
Thanks 🙏🏻
May God bless you too.
This cars coming along real fine 🙂
Thanks 🙏🏻
Fantastic can't wait to see it all complete. Keep up the great content.
Thanks man. Had to order more parts for oil return and feed stuff.
Let the fun begin…
Indeed 😎
Really starting to come together. Keep it up brother 🙏
Thank you 🙏🏻 making progress
It has begun!!!!
Rsx getting the turbo put on great 👍 video I'm curious about the numbers it's going to show on the dyno
Yes I’m shooting for 400 but Michael says it should do 450+
Oh man it's about to get serious!!
Yes sir and i can’t wait to hear it going!
Dream build for me fs cant wait to see it all ready!!
Heck ya!
Hell yeah man, This is the typa content i've been looking for for ages!
I have had this kinda content on the channel a lot but I’m with you on that! It’s so expensive to get to this point but don’t worry more coming asap!
Awesome car bro I’m in the middle of getting my RSX back on the road it’s definitely a journey!
Can't wait for the test drive
Same!!
It looks amazing! You may need to look into getting lock nuts from stage 8 because it may melt
I don’t use nylon lock nuts right now and haven’t had issues using this setup on previous turbo builds and my previous setups ran up to 30psi. Just lock washers and nuts. I can always upgrade hardware if it does happen. Also check my newest video i did upgrade to chrome nuts for the turbo nuts. They look fancy too. 😅👍🏻
Its refreshing, You are the coolest praise the Lord
For the fuel line I’m running a acuity fuel line quick connect to 6an and a devsport fuel line tuck for rsx. That way you can run the fuel line away from it
Also you don’t have to run the coolant lines on the turbo. While it does cool the cartridge and prolongs it. I’ve ran different turbos without them and they didn’t fail early ect. Just my opinion
@@BoostedDc4 i know that much i actually said it in a previous video haha and I have the quick disconnect fuel line stuff. Feel free to message on instagram so I can show you. I just haven’t done a video yet 😂 thanks for the input though!
If god allows, lets send it brethren
Looking good man
Thank you brother
in love
😁
I need that header for a kswap
The 4-1 is being sold to fund more turbo stuff. I would just give it to you bro but as I’m sure you already know im broke 😂
nice looking good 🙏🙏
Which wastegate spring came stock in the Jackspania wastegate
Just found this channel love the content! Was looking into this kit for my Rsx
God Bless!
God bless you! It’s a great kit i found there was a few issues with my setup but not with the kit. I ran a 4 bolt turbo and the coil overs put the steering at a angle which don’t help with exhaust clearance but otherwise it does great!
Bro you got rsx base? Planning to just get base then k swap
the base model already has a k20
@@xavierarriaga7291 I think he means a useful motor, the k20a3 is 💩
@@PNDASnipin I see them with rods and pistons running 400+. Whats sh*t about that? Just get an A2 head to put on the A3 block if you want even more.
🔥🔥🔥
💪🏻
I wonder if this set up will fit my K24A2 CRX?
You have k24 or k20 or frank ?
nice built, by the way what oil catch tank are you using?
Nice video
Did you have to remove/gut anything from the fire wall?? And is that stock harness ?
Is good the jackspania fuel rail bro?
Is this turbo water cooled as well ? If so did you run the water lines ? Or just oil
Not a bad way to re-sell alibaba sidewinder($250) and turbo($100)
Is that fr?
@@mazdafy1428 yeah its fr. dont buy from jackspania or any other shity company this guy peddles. i made the mistake of getting their shift box, it broke down in 2 weeks. turned out the pivot ball they use at the base is low quality trash. its a drop shipping company, stay away
Build your trans. It will break
what throttle body cable you using ?
Hey man I had a question I want to do the same set-up with the sidewinder turbo...but will I be able to install a Ktuned 3" exhaust?
You can but you might need to modify where the downpipe meets the ktuned flange.
@o chuy Awesome bro thank you!