Це відео не доступне.
Перепрошуємо.
K27 -s476 compounds turbo on a 12 valve Cummins price !!!
Вставка
- Опубліковано 15 жов 2022
- K27 -s476 compounds turbo on a 12 valve Cummins price !!!
here is the break down of the cost for the parts to put this k27 and 476 87/82 1.1a/r together
WANT TO HELP THE CHANNEL ?
Merch !!! check out the website for merch www.cutteruprob.com
PATREON ------------ / cutteruprob
also check out my amazon store ----------- www.amazon.com...
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you!
I vote yes for a roughly put together diy kit with all the major components minus turbos of course.
Yes part #s please, starting with a S300G suber B.
I am working on a guide for it
Clamps you can weld on, tubes you can weld up, drains, fittings and lines. Yearwood saved my ass
I like that air filter
Yes, those tight radii 90's are $$$! I'm in the middle of fabbing up a side-by-side compound set, and the manifold turbo is flipped so the compressor wheel is facing where your turbine is. This keeps the hot pipe super short and hopefully spins the S473 t61.15 88/96 super quick. Its just like what you have but the hot pipe length is now the interstage length on your setup and vice versa.
Yep I have some couple that way too. I not sure it made much difference but it did look cool
Yes to the kit
Yes sir to the kit🎉boom boom 💥
👍👍thanks feller...not exactly sure how I'd like to arrange the setup when I do... your's is a good way ..the hot and cold pipes would probably be my biggest hurdle....all I've got is a MIG welder... could buy them from wherever I suppose...but anyway 👍👊🍻
I have done lots with Mig just have to make sure you clean them good
@@CUTTERUPROB 10 4... thanks 👍
Keep the metal clean and biggest tip is get comfy! Find your leaning angles and get comfy with your welding pass before you start the pass. That's the best tip I got many years ago.
@@mustangdemon87 ten four man, thanks 👍👍👊
Crazy carls has a great kit that costs just slightly more
I'd love to see a kit!
I would love a kit
I say yea to this do you have part numbers if not
What brand air filter is that
I ordered a compound kit fro DPS. Its the stage 1 that runs the 475 over the stock hx35. I have a fresh mahle head gasket and Exotic head studs. How much boost can I safely run? I’m a manual with a 215 pump, 5x12 injectors, stock timing, and a s362sxe making 50lbs now. Also with this kit should I add the 4K spring to my current 3k governor set?
I like the 4K myself. Timing up will make it run way better. But is harder on the head gasket. 45-50psi on a good gasket is fine
Tight radius donuts.
K27 isn't worth the cost. Go look at PDD's vids on that turbo- they pushed it (sales). And then they tested it against their "Aggressor" turbo. Stock he351 is just as good. Better, actually. A 67-76 turbine is even better in the he351. IMO. Wouldn't buy the K27. I still think the T6 atmosphere turbo better. Ya, the t4 spools super fast. I just think a S475 T6/1.32AR can still work in a towing app. And cheaper. Tuning needed, and probably a slightly larger injector... but I guess that's the break-point... Want to use stock everything? T4 atmosphere. Willing to put injectors in and tune? T6. Injectors on 24v only good to 150k-200k miles.
These days, market flooded with chinese knock-off he351s. Ok, fine... but replace the compressor wheel with stock Holset, or US made billet. They blow up. Don't deal with a blown up turbo. It's not fun or cheap. Same with the S400 turbos, I see.
Not a fan of side by side turbos. I do over-under. Keep the turbine side as short as possible. I love those cast iron 8.3L cobra heads. Not cheap anymore, though.
I was contemplating putting compound turbos on my truck. It an 03 5.9 with a Hamilton towing cam. I just got a new Hy35w replacement for it and I was wondering what, if any second turbo you would recommend to go with it in a compound set up? I’m looking for a reliable towing set up. It also has a manual trans.
He351 over s472 I really Mike’s on my 2003
So i always see where people trip out about cold air intake with no sroud to keep engine heat off of it
Is this not really an issue?
Any time you can pull heat out on the intake air temp it’s best. But honestly I have never worried about it. But when I get some sensors for data we will find out
@@CUTTERUPROB cool. I like where you plan on going with genuinely testing things your self and sharing results
Very interesting and informative video. I have a question tho. How would the combination HX 35 and HX 52 perform on this engine?
If ur looking for hp that setup will not work good. If ur looking for towing and little bit of fueling up to 400hp it will work good
Yep it’s a old school setup
I'm adding an ht60 I picked up for $100 to my hx35. Cheap, but not a monster setup. Not trying to go crazy just tow pig. Should be fine. Watching this video for ideas on diy fab up
I will give you 1k If you can do this setup to my 97!!
I am pass the point I want to work on others trucks and when I did be a lot more then that