Hey brotha. Nice job on the tracer shading video. I just picked up all sizes of the tracer shad molds as well as the tail molds for each size. I let them know in the comments that I saw it here on your channel as well as letting them know that I didn’t know they existed until I heard of them from your channel. Not just for this video but thank you for all the videos especially the ones that cover the beginner mistakes. I know I’ve saved a lot of time and money not making those mistakes. Always looking forward to the next video 👍🏻
Awesome lookjng bait! That laminate turned out incredible so did the electric chicken! Nice way to make a hover rig without the typical jigheads! Thanks for the tip!
Nice colors. An old school dart head jig can be buried in the bait for the same action. That's how we rigged the Bass Assassin when it came out 30+ years ago.
Nice colours and mold. Just as a tip, for the hover rig, you can use the sinker with heat shrink tubing to adjust it to the hook, so its much easier to rig it and you also can change the bait if needet easylie 🙂
I've seen that..downside would be that it adds mass and could make it tougher to fit everything in a bait without sacrificing the integrity of the plastic too much
I really like this split tail mold....cool design...I use the basstackle 4.25 cuz it was the nicest one available for walleye til this was made! A must have for me eventually.....currently working on getting g5s....and more g4s and 6s Cool video man finally had time to watch
Still trying to figure out correct way to rig the core tackle jig heads. Baits roll over hook down when sinking and then roll causing line twist when reeling in. Guess I’m gonna buy hooks and weights separate and rig like this video. Just like Ben does. Good video. Great looking baits.
Question I got is when I do my tail molds I do it the old way when you shoot the mold then cut the tail then shoot the body color. The problem I have after I do this is some of tails don’t bond together and fall off. I don’t have the tail mold and probably would help out a lot.
Beautiful baits and molds, almost makes me want to make my own !! Great tips on how to hover baits, didn’t know how before. Can you do that with the swimbaits also? I would think you could, have you done it and is it effective? Great video as always by the master creator!!
There's a really good argument that fish need a safe space (out suspended in deeper waters) to really thrive. When they are getting pressured everywhere they go, there's potential to really negatively impact things.
I would like to see the tracer body with a boot tail and a belly split for weed less swim bait or weed less under spin using a texposed hook probably 3 inch up to 6 inch
Do you know if they are going to make an eight cavity mold? If so that might replace my eight cavity jigging minnow mold. The body on these look more thick, should catch a few more fish before needing to be replaced.
So is there a metal based flake that makes your soft plastic more visible on FFS? I know a company has already cane out with a gel to apply to soft plastic to make them glow more on FFS... 🍺🎣
You don't want metal flakes..blow up your microwave lol...yeah the FFS gel to me is a gimmick...I didn't see anyone using it over the weekend, more about settings
what's name of the video about not filling molds in all the way some of my molds don't want to fill up all the way what causes that i shoot it slow top off the sprool and i an inject the mold 350 to 320 and it does not fill in all way some of my molds do i even tried cleaning the molds for moster i put pressure when i shoot with the injector i dont know why its doing that do you have a video about it what to do you think the molds are cold is that why its doing that
I told the AI team to stop sending you new molds as they keep costing me more money. Been searching for almost a year for this mold. Only problem I had is I bought the 3" and then the 4" got released. It will be delivered tomorrow
Link to the mold: anglingai.com/4-tracer-shad/
lurepartsonline has the jigs in case people take the time to read replies ;)
Glad to know @scottkidder438
4” make a great chatter bait trailer as well! Almost like the spunk shad.
I don’t have live scope but see an awesome trailer and love that hover rig set up.
Hey brotha. Nice job on the tracer shading video. I just picked up all sizes of the tracer shad molds as well as the tail molds for each size.
I let them know in the comments that I saw it here on your channel as well as letting them know that I didn’t know they existed until I heard of them from your channel.
Not just for this video but thank you for all the videos especially the ones that cover the beginner mistakes.
I know I’ve saved a lot of time and money not making those mistakes.
Always looking forward to the next video 👍🏻
Awesome mold and awesome colors and thank you for sharing it Chris 👍🥇🏆🏆
Thanks for watching
Love this mold!!
Nice thorough demo as usual. Great color choices to show off the mold and really great rigging demo!
Thanks and thanks
Thank you, Chris! Great video. Really appreciate the rigging information.
🙏🙏
You rock with the awesome colors.
Thanks
Well, very nice mold and very gorgeous shiner/shad baits made!
Arkansas shiner is the one that works everywhere!
Very true!
Yes!!!
That’s such a hot mold! I gotta get one!! 🤙💀🤙
Another Angling Ai masterpiece 🔥
Yessir
Yep, gotta order it now 😂 nice work as always! 👍
Thanks
Awesome lookjng bait! That laminate turned out incredible so did the electric chicken! Nice way to make a hover rig without the typical jigheads! Thanks for the tip!
Thanks 👍
Nice colors. An old school dart head jig can be buried in the bait for the same action. That's how we rigged the Bass Assassin when it came out 30+ years ago.
Nice colours and mold.
Just as a tip, for the hover rig, you can use the sinker with heat shrink tubing to adjust it to the hook, so its much easier to rig it and you also can change the bait if needet easylie 🙂
I've seen that..downside would be that it adds mass and could make it tougher to fit everything in a bait without sacrificing the integrity of the plastic too much
I really like this split tail mold....cool design...I use the basstackle 4.25 cuz it was the nicest one available for walleye til this was made!
A must have for me eventually.....currently working on getting g5s....and more g4s and 6s
Cool video man finally had time to watch
You'll love the G molds..I can't pour em enough
Hey buddy good work, they are really pretty, no way a bass could pass!
Good looking bait-I dig that “lateral line” on the side. Looks like it would benefit rigging correctly 👍🏻
The line is really cool
Great video I think I’ll be ordering this mold soon
🙌🙌
Great video.
Nother sweet mold form ai saw them on their website in joy the content keep them coming can't wait to see the new boat
Me too...I'm ready for it
Still trying to figure out correct way to rig the core tackle jig heads. Baits roll over hook down when sinking and then roll causing line twist when reeling in. Guess I’m gonna buy hooks and weights separate and rig like this video. Just like Ben does. Good video. Great looking baits.
Like the molds! You should make 6th Sense's Wild Lava Craw color. black and red laminate. Really awesome color!
Question I got is when I do my tail molds I do it the old way when you shoot the mold then cut the tail then shoot the body color. The problem I have after I do this is some of tails don’t bond together and fall off. I don’t have the tail mold and probably would help out a lot.
Your Awsome bait maker.
I appreciate it
Beautiful baits and molds, almost makes me want to make my own !! Great tips on how to hover baits, didn’t know how before. Can you do that with the swimbaits also? I would think you could, have you done it and is it effective? Great video as always by the master creator!!
If you take the smallest one make it a glow and tandem rig it good bait for spectrum trial under the lights at night
Those are perfect chatter bait trailer 🎉
Definitely
Need that electric chicken color done in those for saltwater looks awesome
My first thought for this was the 3 inch for Pompano.
I need a 2" tracer shad
It's coming
very nice sir
🙏🙏
There's a really good argument that fish need a safe space (out suspended in deeper waters) to really thrive. When they are getting pressured everywhere they go, there's potential to really negatively impact things.
It could also force them back up shallow where traditional fishing will be better
😂😂 Imagine were living in a world where u get banned for anything you say and fish need a safe space
What plastisol are you using ?
Where can I buy some of soft plastics
I would like to see the tracer body with a boot tail and a belly split for weed less swim bait or weed less under spin using a texposed hook probably 3 inch up to 6 inch
great video! What happens if you shoot the plastic to hot
Usually isn't ideal for injection that's all
Do you know if they are going to make an eight cavity mold? If so that might replace my eight cavity jigging minnow mold. The body on these look more thick, should catch a few more fish before needing to be replaced.
I'm not sure..if they make a smaller size it will likely be more cavities
Can you add tungsten powder to you pours?
Where can I find a 2 inch laminate paddle tail mold
So is there a metal based flake that makes your soft plastic more visible on FFS? I know a company has already cane out with a gel to apply to soft plastic to make them glow more on FFS... 🍺🎣
You don't want metal flakes..blow up your microwave lol...yeah the FFS gel to me is a gimmick...I didn't see anyone using it over the weekend, more about settings
what's name of the video about not filling molds in all the way some of my molds don't want to fill up all the way what causes that i shoot it slow top off the sprool and i an inject the mold 350 to 320 and it does not fill in all way some of my molds do i even tried cleaning the molds for moster i put pressure when i shoot with the injector i dont know why its doing that do you have a video about it what to do you think the molds are cold is that why its doing that
where do you buy your micro powers thank you
@@jimstewart1946 dead on plastix has shift powders
have you ever done a color match on opening night ? I tried to last night,,, complete fail
Opening night?
Chris opening night by zman
Where can i buy the mold you are using?
@@petravanderkwaak655 Angling Ai molds
Use it on a small ball head, like the FinnS shad.
Hell I would even throw it on a spot remover
Is the body too meaty to Texas rig?
جميل حق"
What Is Smoking On Those Molds??
Smoking?
Have you tried the triple injector on this bait?
@@henniewiese4387 yes
@@WorldsWorstFishing is there a video of it?
One question, can you do a video of melting baits on a small stove without using a microwave?
no beacuse you dont want do cook plastic indoors, fumes can be bad
where do you get your injector
Basstackle
Are you selling these?
Was that a moldgasm at the beginning? 😂
oh you know it
U gotta change ur channel name, these baits look 🔥😂
Haha th
I told the AI team to stop sending you new molds as they keep costing me more money.
Been searching for almost a year for this mold.
Only problem I had is I bought the 3" and then the 4" got released. It will be delivered tomorrow
Good to have both tho
If its smells good It's surely not CNC oil.
Dear god, causing some stress putting that nail weight in with scissors...
What plastisol are you using ?
What plastisol are you using ?
What plastisol are you using ?
Dead On Plastix