This tip just saved me buying a new pump because I swear to god I thought my pump was broken... I feel so stupid and so relieved I found this. It worked right away when I did this...
@@IvansBikesBmws I really appreciate your advice I couldn't figure out what the problem was thanks to you everything is working smoothly much appreciated 👍
@@IvansBikesBmws I'm having this problem right now where I'm pumping air into the rear tire but it's hard to pump when I press down, so I should tap the valve twice and then pump air into the tire
I’m blown away this was incredibly helpful I am delighted beyond a shadow of a doubt. Much thanks stranger, I am grateful for your explanation. 100% confirmation of my misdeeds while attempting to fill the apparatus with oxygen. Oh how fortunate I was to come upon this explanation on UA-cam!
Thank you also for commenting. I am glad how this video is helping lots people out there. Liking and giving comments! I am just wondering how many people threw out their tubes and pumpes because they did not know what was the issue.
You can do it! And yes, never rush. Also you can look at my video again so you can figure out how to put together what came a part. Also thanks for the superchat!
Thank you!!!!!!!!!!!!!!!!!! I decided to go on a bike ride this morning and noticed my bike tire needed air and I had no idea why the pump gave so much resistance. Thank you!!! This worked!!!!! Now I’m going on my ride
If the rubber seal in the valve is older it can get wider and it will close the valve even if you tap it. So, the valve will be closed with the pin in and out and be partially open in the middle. The pump pressure will close the valve by pushing the pin in. Then, the valve core should be replaced.
@@IvansBikesBmws it worked! First time out on my old bike now for over 5 yrs! Tyres inflated! Thank you! Now to check the gears, not quite right somehow..
I'll try this tomorrow, I've even bought a new track pump and got in a right temper with it, I thought it was my weak arms, also I've bent the valve and sealant keeps oozing out, I'm fed up
Honestly I watch the video a couple times and I still didn’t understand but at least I was able to figure out what pieces supposed to go where and eventually it worked out. Also I was always about to give up or I thought the pump wasn’t working and it was just me😅
@@IvansBikesBmws 😅you are right 3-4 years of the bike just sitting and moving houses. I'm working on it but the video helped. 40 minutes of nothing, and after watching the video I made some progress.
I find that if I unscrew the presta value all the way open, when I put the pump over it and secure the pump with the lever, air is escaping. Whereas if I unscrew it just enough so that the air hisses out when I depress it, then there’s no air escape once the pump’s on.
@thatpyraguy Over the time, the valve pin just need to be tapped to lose up and do what is is supposed to do. Just the way we hit car starter and it starts working. That's how I see it when I tap it with my finger.
@@IvansBikesBmws Yea it worked earlier but I unscrewed the nozzle and took out the two pieces and now I cant get the rubber to go in all the way in order to to close it back for it to work properly.
Do you have any other work arounds? I have tried 3 tubes, none work, one not letting air in, the other 2 , the air escapes as soon as it goes in. A 4th tube has worked so it isn’t the pump.
*I did your trick which stopped the resistance, but everytime I pump the air is not going into the tyre, and I can hear the air pumping out of the valve. Helppp !!*
I took my tubeless bike to repair shop for this.. charged me 80 bucks.. theyvsaid it was due to tubeless not sealing edges.. for sure there are white collar robbers.
Absolutely stupid connection,if the tyre is nearly flat the connector pushes the whole valve back into the tyre.the inventor of this should have it connected to his parts!
amzn.to/3REOkDJ
Here is a link to 700c tubes in case you have to buy one and old one is done.
This tip just saved me buying a new pump because I swear to god I thought my pump was broken... I feel so stupid and so relieved I found this. It worked right away when I did this...
Glad I was able to help.
That explains my problem thanks!
Me too. Cheers
@@IvansBikesBmws I really appreciate your advice I couldn't figure out what the problem was thanks to you everything is working smoothly much appreciated 👍
@@TakedaKenshin Glad you found a solution. Cheers!
One of the most useful tips I've found on UA-cam. Quick, to the point and effective. Thank you!
Highly appreciate the kind comments. Thanks
Life saver, thank you so much! Was on the brink to go mad 😅
My pleasure.
@@IvansBikesBmws I'm having this problem right now where I'm pumping air into the rear tire but it's hard to pump when I press down, so I should tap the valve twice and then pump air into the tire
@@GabrielLopez-nd5fc yes. As long it takes
SAME
Almost threw my bike across the yard 😂
Dude, thank you. I’ve been trying to pump my freaking tire for like 30 minutes. I literally almost returned this bike 😂😂😂 thank you for this so much
@crashoutt.j Hahaha even if you returned the bike, You know where to take it back and how to pump it properly.
Thanks for the comment! Cheers
I was going to dump my pump before watching this video… Life saver! Much appreciated
Everyone says a life saver lol.
Cheers
This makes a huge difference! Thank you. You are saving people's sanity around the world.
Comments highly appreciated!
Comments like these encourage me to help others!
Thank you so much! The only thing I was pumping up bigger was my chest and arms. Amazing!
You are welcome and please consider subscribing.
Oh wow so easy when you know how. Was beginning to think my valves were cursed! Cheers
Spot on and thanks for the comment! Always double check when in doubt.
I was wrong that my cycle tyre was damaged!
Thank you brother😅🙂♥️
Happy for you! Saved $10!
WOW. I can't believe it's that easy. Thank you for telling us so quickly too.
@@Jake-fk5zw
I try to make it straight to the point.
I’m blown away this was incredibly helpful I am delighted beyond a shadow of a doubt. Much thanks stranger, I am grateful for your explanation. 100% confirmation of my misdeeds while attempting to fill the apparatus with oxygen. Oh how fortunate I was to come upon this explanation on UA-cam!
Glad to hear and please consider subscribing.
Thanks everyone for commenting! It helps others while pushing this video up in the search.
You saved me from a huge disappointment. Thank you
@@rashukn My pleasure! Enjoy and consider subscribing.
Thanks also for confirming what way the lever goes.
I didn't know if it was down to up or up to down !
Thank you also for commenting. I am glad how this video is helping lots people out there. Liking and giving comments! I am just wondering how many people threw out their tubes and pumpes because they did not know what was the issue.
It was driving me crazy! Such a simple fix. Thanks.
Enjoy cycling
That’s enlightening…have changed so many valve cores….without understanding…thanks
Glad I could help and please consider subscribing. Cheers
I tried to rush and set myself so far back 😂 You gave me a 30 second fix
You can do it! And yes, never rush. Also you can look at my video again so you can figure out how to put together what came a part. Also thanks for the superchat!
@@IvansBikesBmws The pin tip worked like a charm thank you 🙏🏽
@@AntiGolf
Thanks again.
Thank you!!!!!!!!!!!!!!!!!! I decided to go on a bike ride this morning and noticed my bike tire needed air and I had no idea why the pump gave so much resistance. Thank you!!! This worked!!!!! Now I’m going on my ride
Enjoy the ride and consider subscribing.
Thank you for this! Worked straight away 😊
@lydiainstone799 Love the feedback! Thanks and enjoy cycling also coniser leaving a superchat donation for more videos to come.
I was literally yelling at my bike before watching this. Good video.
You are welcome!
You are a legend mate. This helped a lot👌
Huge thanks. I tried to make it a simple, short and straightforward video. I can see it is picking up the videos
Highly appreciated kind comments because lots
Of us have benefited from this video.
one mind blown tip!
much tx !!
Cheers and thnx for the comment!
Amazing I'm on my way now, thanks to you!
Glad to hear that!
Thank you!! I didn’t know all of this. You helped a lot!! 😊😊
Some people threw out the inner tubes because they did bit know the issue. Glad I can help. Cheers and pls consider subscribing.
Great, I can finally like Presta valves now
Once you figure them out, all good
Sir. You are a savior! Thank you so much!
cheers and enjoy cycling! Pls consider subscribing.
You are a lifesaver. Thanks!
Someone had to be! Thanks !
It freaken worked. Smh. Thank u sir.
@oscard926 It has to work! Thanks for a comment and now more people get to see the video and benefit.
If the rubber seal in the valve is older it can get wider and it will close the valve even if you tap it. So, the valve will be closed with the pin in and out and be partially open in the middle. The pump pressure will close the valve by pushing the pin in. Then, the valve core should be replaced.
@@mreese8764 correct
Omg off to tap the valve now after 2 Days of trying to pump the flipping things!
Enjoy the bike now!
@@IvansBikesBmws it worked! First time out on my old bike now for over 5 yrs! Tyres inflated! Thank you! Now to check the gears, not quite right somehow..
@@risenshine2783
Glad to hear! Give it a tune up and ride!
Bro I needed this thank you
Of course you need that! Cheets everyone
Good advice👍🏻👍🏻
@@Happyk166 Thanks. Highly appreciated feedback
Thank YOU! I'm doing it wrongly
Glad I can help and please consider subscribing.
But I have this problem with the Schrader pump. Is it the same fix?
@@discipleinlight yup. I will send ya that video.
@discipleinlight ua-cam.com/video/PEfb_iFLxxY/v-deo.html
SCHRADER version the same video / for the same issue.
Super helpful!!! Thanks much.
My pleasure!
Thanks I was about to throw this pump out the door. Hard time pump it. The handle has to be pull up to pump it .
Haha there ya go! The pump gets to stay home a bit longer.
I'll try this tomorrow, I've even bought a new track pump and got in a right temper with it, I thought it was my weak arms, also I've bent the valve and sealant keeps oozing out, I'm fed up
Wish ya luck.
Love the positive comments + happy 2024 all my viewers.
My pin is loose, it wasn't before I started pumping air and now it is.did I break the presta valve?
No you did not. They sometimes get loose and firm up as air comes in. Nothing to worry.
@@IvansBikesBmws Not sure if it was fixable, I couldn't air it up with a hand pump so I brought it to the bike shop and got a new tube.
@IISourAyyII Sometimes that is the way to go. If you can't air it up, just throw in a new tube.
Honestly I watch the video a couple times and I still didn’t understand but at least I was able to figure out what pieces supposed to go where and eventually it worked out. Also I was always about to give up or I thought the pump wasn’t working and it was just me😅
Just unscrew the presta pin and tap it with your finger. That will loosen it and than Inflate the tire.
I get the feeling, if the tires were not inlated in a while, the pins needs that work our or a push lol.
@@IvansBikesBmws 😅you are right 3-4 years of the bike just sitting and moving houses. I'm working on it but the video helped. 40 minutes of nothing, and after watching the video I made some progress.
@@MissMaris2016 Glad to hear my video helped. I suspected that was the case.
Again, thank you everyone for commenting. It is okay if you don't not get it at first, I am here to help.
I was pissed to the max until I tried this two taps thingy thanks universe 😂❤
Enjoy cycling.
Superchat donations also very welcome. Highly appreciated.
Thank you!!
@RyanPancoastIllustration You are welcome. Enjoy cycling!
Omg thank you so much you save me!!!
Thanks for commenting ! Cheers
I find that if I unscrew the presta value all the way open, when I put the pump over it and secure the pump with the lever, air is escaping. Whereas if I unscrew it just enough so that the air hisses out when I depress it, then there’s no air escape once the pump’s on.
A very good and useful tip.
Highly appreciated.
Thank you.😊
@@millicentruzvidzo7878 My pleasure.
Thank you!!!
Enjoy cycling! My pleasure to help !
THANK YOU SO MUCH!
Thanks for commenting
Thank you
@@loveyoutube2 You are welcome.
Im facing the same problem but i got a schrader valve how can i fix this problem?
Your pump clamp is not tight on the valve most likely.
@@IvansBikesBmws how could i tighten the bike clamp?
i tapped the pin but there's nothing coming out? and still having trouble pumping air. any suggestions?
Did you try popping it out and than tapping?
@@IvansBikesBmws you mean popping the pin out? i have unscrewed the pin then tap and there is no air coming out (or very little)
@@IvansBikesBmws any chance i can PM you somewhere with a video of my issue?
@WoahItsLucas Sorry no. The best option is just replace a tube.
@@IvansBikesBmws they are tubeless
Wish everyone luck with their valves.
Thank you
@@maryamory1549 You are very welcome.
Thank you🎉
My pleasure and pls consider subscribing. Also thanks for thanking me.
Tysm 🙏
@@airless5834 Thanks for the kind comment+
But why? How does tapping it reduce resistance?
Very good question. I think that inner pin gets locked in somehow so you have to wake him up by tapping him.
Thank you !!! 👍🏼👍🏼👍🏼
Enjoy cycling!
Why does this work?
Have you watched the video?
@@IvansBikesBmws I have, I was just wondering why does that exactly solve the issue?
@thatpyraguy Over the time, the valve pin just need to be tapped to lose up and do what is is supposed to do. Just the way we hit car starter and it starts working. That's how I see it when I tap it with my finger.
I will try
@aliimran1110 Wish you luck.
Its still doing it but my rubber piece also wont go all the way that responds to the lever
You sure you good the right clamp?
@@IvansBikesBmws Yea it worked earlier but I unscrewed the nozzle and took out the two pieces and now I cant get the rubber to go in all the way in order to to close it back for it to work properly.
@@AntiGolf ohhh looks like the pin came off loose. You gotta pop it out and put it back on the valve.
Loved it. Except your arm was in the way also....😮
Thnx
Getting better and improving everyday. Thanks for the feedback
Hero.
Thanks for the comment
THANK YIU SO MUCH!!!
You are very welcome!
here now here now here now!
Nothing scripted , so it can be quite overwhelming. Thanks for the feedback.
@@IvansBikesBmws ignore the troll, thanks for the helpful video!
@@LH85242
Lucky that I don't get that many lol. Thanks
What about a Schroeder valve?
Made a video on it, just look up in my videos
Very helpful!
Highly appreciated the feedback.
which pump hole was it?! YOU ARE COVERING EXACTLY THERE :(((
Presta
thanks! :)
Enjoy your bike!
Touch the tip. Nice 😂
Hahaha just like the TV from the 1970s, it needs a smack to work.
Ty ty ty ty ty ty TY
@@TallowQueen You are welcome
Thanks everyone for commenting so more people see the video.
Do you have any other work arounds? I have tried 3 tubes, none work, one not letting air in, the other 2 , the air escapes as soon as it goes in. A 4th tube has worked so it isn’t the pump.
Actually not the 4th tube isn’t inflating either. Problem is air escaping at the connection
The tube at the presta is more narrow with air in the tube? Weird?
John you are definitely doing something wrong. You either pinched the tubes or something. Pumps are also very solid.
*I did your trick which stopped the resistance, but everytime I pump the air is not going into the tyre, and I can hear the air pumping out of the valve. Helppp !!*
You have a leak 100%. Inspect the tube.
Never explained why though
The videos makes it self-explanatory.
LOL, I thought the locked position was clamp down. 😮😂. Bruh.
We live and learn haha. As long as bike shop do not sell ya a presta tube that you don't need as your stuff is working fine lol.
mine dosent release air though
Try inflating just to see what happens.
@@IvansBikesBmws figured it out just rammed it on hard as possible
@@f18forlife72 Thanks for the feedback!
If anyone has suggestions or questions, please just ask.
My pin doesn't work like that
@cameroncayer9726 Than it may be the time for a new tube.
@@IvansBikesBmws a whole new tire?
@@cameroncayer9726 Just the inner tube. I would get a cheap one to test it.
Didn't help me...I think I have a weird bike. I can never pump more than 20 psi but they feel like they have plenty of air.
You seem to have good amount of air . Also for the next time deflate and Inflate tubes. That will work
Thankyou so much , u saved me🥹🫂💗
Yay for the save! Enjoy cycling!
Issue is presta itself
@user-dj2hm2gd1c Thanks for the comment and I agree lol.
I took my tubeless bike to repair shop for this.. charged me 80 bucks.. theyvsaid it was due to tubeless not sealing edges.. for sure there are white collar robbers.
@@javihernandez7326 Very possible as bike shops are sufferings. Will do a video on it.
Absolutely stupid connection,if the tyre is nearly flat the connector pushes the whole valve back into the tyre.the inventor of this should have it connected to his parts!
I agree totally
Только хотел сказать. Центральный золотник залипает, пошатайте его....
@@ffd700chewbacca8 English?
@@IvansBikesBmws making same U
@ffd700chewbacca8 Thank for commenting !
But you didn't say why.
confused
@@IvansBikesBmws You didn't explain WHY this is necessary. You just said to do it.
@@rorystorm4284 Ops my bad. Basically to unplug the valve to let air flow in.
... What? I want my minute of life back.
@@simv765 sarcasm? Lol
Omg REALLY??!!
WHYYYY???
@@ellenlivingston6632 ???
Schrader valve version here as well .
ua-cam.com/video/HJqAg_lwpCE/v-deo.html
Turn of autofocus when filming things like this....
@lovemadeinjapan Yup, but I got the new phone camera so it will improve as I film more.
Wtf!? Thanks
@@timothygallagher4663 You are very welcome.
@@timothygallagher4663 Please consider subscribing
Great man and funny
Thanks a lot and and highly appreciated kind comments. The video is doing well thank to comments.
amzn.to/4aFp06S that is a good pump if you need a pump.
🤣
thanks
Thank you!
highly appreciate people commenting
Thank you
@Riz-gp3qm Thanks everyone and consider subscribing.
Thank you so much
My pleasure and please consider subscribing to support my work. Highly appreciated!