#9 Solo and Buddy Seat Assembly and Install - 1969 Harley Davidson Electra Glide Shovelhead FLH
Вставка
- Опубліковано 26 сер 2024
- This video shows ya a couple options for the seat set up for shovels and pans.
1969 Electra Glide Shovelhead FLH Head Installation
Check out my Instagram
/ nuts_and_boltz
Intro Video By:
www.brettwarken...
Finally, somebody doing a full assembly and installation guide for it, been looking everywhere
Thank you so much for doing so, finally i can install one on mine after struggling with manuals, thanks a lot 🙏
Ride safe and keep wrenching while inspiring us the newbies lol
You are very welcome, that's why I made the vid
Same here! I thought I had to remove half the tank for that front bracket .I guess not. But, I didn't quite get that part .I couldn't see it. What do you do with that front bracket? I know earlier he bolted it to the seat. But what happens with it when you put seat on bike???
@@lots3799 you mean the front mounting on the seat pan? He dropped the front seat pan mounting equipped with a bolt on to front side of the T bars (which already having a flush hole for the bolt to be inserted on). Then tighten it up with a nut while lifting the T bars alongside with the mounted seat on while doing so. Don't fix the pogo to the T bars, you should do this at the very last, its easier to tighten every nuts and bolts while you can still lift both the seat and T bars at the same time...
Hope this helps you and exactly answered your question
@@lots3799 there’s a hole in the seat T
Very helpful. Thanks!
I couldn't see what you did at the end with that front bracket. What does it attach too? Thanks. So glad you made this video. I bet folks would like to see you install the fiberglass saddlebags and rails !!!! I always thought I had to take the tanks off for that front bracket. Glad you don't.
It attached to the seat T
I have been looking for a video of putting the seat clip on without bending it. I realize it would be difficult to film as it is not in an easy spot.
Very Nice. How do you use the 2 springs under the back part of the seat?
When you don't want to use the springs they are up like in the video, and they sort of clip up and stay up with the clips that protrude. When you want to use the springs, you just pull on them, and they pivot and turn down, and then there are 2 little nubs on the end of the springs that go into 2 little holes that are on the small brackets that are bolted on to the the frame. I should just shoot a video of it, so you can see how it functions.
@@nutsandboltzgarage5889 OK I thought you had to fasten them (bolt) them to the frame brackets. I will try what you said
My 72 flh jumps out of gear after you start it and put it in first. What's that mean? Clutch adjustment? Can you make a video on that?
Sorry I didn’t see this sooner. It sounds like a worn out dogs on first gear. Clutch has nothing to do with that.
Hey dude I'm looking for parts for a 1973 flh where do you get yours?
Usually eBay. Or the Long Beach CA motorcycle swap meet. What parts do you need
i don't think that buddy seat would work 4 the girls i go out with
Hahaha!
It might. A few weeks ago I had two girls and myself on this seat. But... they had no butts.