How to release speed limit on JOYOR Y8S scooter? Change the controlle. electric scooter modification
Вставка
- Опубліковано 9 тра 2023
- Ersetzen Sie den Controller, um die Geschwindigkeitsbegrenzung aufzuheben
Remplacez le contrôleur pour libérer la limite de vitesse
Sostituire il controller per rilasciare il limite di velocità
todimart.com/collections/scooter
Thanks for your videos, they are very good! Can you not even make a video how to change the rear tire / tube at the Joyor Y8S? That would be very intressant for many I think
Hi, which controller did you buy? I need one as well. Thank you
Hello, could you make a tutorial how to install a relay remote control for a tuned scooter? Like you press a button on the remote controll and it changes the speed from max speed to drosseld speed.
Where can you order the replacement controller please?
And another question, the Y6S doesn’t have a speed limit at all on delivery? The Y6 seems much better, also has a key, blinkers aso, why is the Y8 more expensive?😮
Will this de-restriction increase the torque? Or in other words make it better at going uphill
It is worth to buy y8s instead y6s? Distance is much better
Where did you buy this Controller
Hello. Is the new controller a 23a controller?
can the speed lock on wheels e7 be removed?
The 2024 Y-8S model does not have the blue cable for the speedlimit, another way possible to unlock the speed by the cables?
There are another method before cutting the blue cable it work on y6s with limited speed to 25km/hm even if programme p15 is at 100
You need to push the brake ,at same time open the scooter with buttons power
Always push the brake at the same time you will then push the acceleration button 3 time
2 time quickly and one time you stay 3s
If you do that the speed limit will be removed and if you do that again the speed limit is back
No need to cut the blue cable
Hi, please where is the cable of the speed limiter on novamile N20? I can see the similar controller but i dont know if speed limiter have the same color
I bought a controller a different product. The seller said the controller is for Joyor product. the controller has no blue wire no speed limit. Do you think its going to work,?
good morning
I have a joyor y5s I installed a new motor but unfortunately the wheel spins in the opposite direction what do I do?
Can anyone help me: in Germany, the rear light must not flash when braking. It must shine continuously. Is there any way to change or modify this in the settings for the Y6-S?
Hi I have a gyroor c1 scooter can you tell me what color are the speed limiter so I can disconnect
If you cut the blue cable that goes out and back into the controller on the original controller, the Scooter 45 will drive
What if it is not a blue Cable
You don't need to change the cotroller, inside the original one you have this blue cable :)
Inside the yojor y s8 I could just cut the blue cable inside the Platin? Would be helpful im from germany
Do you have to open the controller
Hallo, wo bekomme ich diesen Controller und Display her? Danke für die Antwort.
Mit freundlichen Grüßen.
Hello, do you know how to increase speed limit in acer es3 electric scooter?
Hello, where can we order the controller?
Привет, так в чём разница, изза чего один едет бцстрее другого? Каеой контролер нужно купить, нудно ли бортовой компьютер менять?
я этого тоже не понял, вроде бы, достаточно просто обрезать синий провод
Could someone help me regarding joyor y8-s? Which blue cable exactly should I cut to unblock it, because there are many blue cables?
Update: Das Blaue drosselksbel befindet sich im controller selbst, einfach die 3 Schrauben an der Seite lösen und die platine herausnehmen, genau auf dem Board ist dieses Kabel. Man braucht keinen neuen Teuren Controller zu kaufen
Dort ist kein blauer Kabel beim joyor y8s
@@hausmaus-hu8hq doch 🤣🤣🤣.. du musst den Controller aufschrauben und dann die platine rausnehmen dan befindet es sich rechts!! Kann natürlich sein das sie es wieder verändert haben das glaube ich aber nicht
@@hausmaus-hu8hq Den E-Scooter zusammen klappen und die vordere Klappe am Deck vorne entfernen. Insgesamt 3 Schrauben rechts links und unten.
2.
Den Controller rausholen und die 4 Schrauben am Deckel wo die Kabel rauskommen entfernen . Dann die 3 Schrauben an der Seite des Controllers entfernen . Dann kann man die Platine vorsichtig heraus ziehen.
3.
Auf der Platine ist ein Blaues Kabel .
Das muss in der Mitte getrennt werden.Dann in den PSettings bei P15 auf 100 stellen. Und das wars auch schon. Jetzt müsste er ca 40 km/h fahren ohne last zeig er 49 km/h.
@@Schneidi27 was sind die pssettings und hast du instagram da sind nämlich 2 blaue Kabel ein dickes helles und ein dunkles blaues
@@Schneidi27 ich habe das getan aber es gibt kein Gas mehr mein scooter dort ist ein Warndreieck auf dem Display
Hi, do you know how to unlock the speed on the joyor f7? It has 3 blue wires and no one works when i cut them, and the access to p08 on the display monitor is restricted
What is the current top speed? Perhaps this is already its maximum speed.
@@SCOOTERREPAIR-kf2fn Its only 30km/hr
Hi, good video thanks. The newly shipped Y8S scooter I received does not have the blue speed limiting cable. Is there a way to take the originally-shipped Y8S controller (which does not have the blue cable) and disable the speed limiter without having to find and swap an additional controller from earlier models? If there is another cable on the Y8S which limits the speed, I do not know which ones it is. Many thanks for any suggestions you may proivide.
It doesn't seem to work. Only the controller can be replaced. the original Controllers are custom made. Customized for a special certificate in Germany. So there is no room for opportunism.
@@Mechanic0007 Thank you for your reply. I shall indeed try your original solution then. Thank you for providing that and have a great day!
@@Will2win24 das blaue Kabel ist im Controller selbst, du musst die 3 Schrauben an der Seite des Controllers lösen und die platine rausschieben und voilà da erbkickst du das blaue Kabel. Du musst keinen neuen Controller kaufen
@@Schneidi27Gehen die Y8s auf 40 oder 60, wenn Sie das blaue Kabel im Controller herausnehmen?
@@JULUSK-ru6kv 49kmh ohne Belastung je nachdem wie schwer du bist geht die Geschwindigkeit weiter runter, ich wiege 70 kg und schaffe 44 kmh
Hello, I have a Joyor Y8S scooter but in my country it is called e-wheels Joyor Y8s and it has a 1000W motor instead of 500. Will this controller work with my motor?
Er du norsk?
Fikk du det til vvis du er norsk please svar vurderer og gjøre det
My my don’t have blue wire … pls any help
Wo kann ich bitte einen Geschwindigkeitsregler für JOYOR Y8-S bestellen!!
todimart.net/products/joyor-scooter-meter-f-g-y?variant=42028442386623
Dankkee
Guten Abend, ich habe gerade den Batteriecontroller angeschlossen... das Display des E-Rollers geht nur an, wenn er an die Steckdose angeschlossen ist (Laden), wenn ich das Batterieladegerät entferne, geht nichts an, Sie wissen warum. Displey E-0 😅
Good evening, I just connected the battery controller... the e-scooter's display only comes on when it is plugged in (charging), when I remove the battery charger nothing comes on, you know why
Apparently the battery is fully charged
Hello sir!
My Joyor s10s scooter. I bought it 2 months ago.
Now there is a big problem, the battery has full charge but when the scooter is turned on it shows low battery. pea, light nothing works. Again, if the charger is connected to the current, then the motor, lights all work.
I hope to get an answer from you how to solve this problem.
thank you sir Please reply.
Vielleicht der Bsi Controller an der Batterie?
@@stefaneisler maybe battery
man people ask questions answer! on Amazon, in the comments under the product, it says that nothing changes after the blue cable is cut, or you're kidding people, or you don't show exactly how it all happens!
Кто поможет как заказать контролер я нахожусь в Германии незнаю как заказвть может есть способ как легко заказать😢
Подскажи у тебя стоп сигнал работает на y8s, а то у меня только как габарит работает😢
5:18
just cut the limitor wire instead of buying a new controler
thats working like a noob bro they both were resticted your original onz has also the cable just cut your original cable