Well, I have to admit that I watched the video 2 times already and this is the 3rd. I also enjoyed the music. Epic music for a legendary bike and a heroic restaurateur. Well done, buddy!
I have a 1988 XT600 with less than 9000 miles on it. Garage kept. With Super Trapp exhaust system. I’m going to repaint the frame, tank, and refinish the plastic. Your video gives me drive to do mine. 👍🏻
Faszinierend, eine Wahnsinnsarbeit, Hut ab! Du kannst dich glücklich schätzen, dass deine Frau dein Hobby nicht nur akzeptiert, sondern auch noch selbst fleißig mitmacht, auch ihr meinen größten Respekt! Lediglich die abgewetzte Sitzbank hättet Ihr bei dem ganzen Aufwand und Kosten auch noch neu beziehen lassen können.
awesome guys!xt '89 the best...i really admire this knowledge to restore. i ve got an xt600 2003 black, i turn it to white,i found plastics,which is in very good condition,but i really like this old xt...the 1989!
I preferred the 84 up to 87-88 the red - white the 6 gear model blue 1 had e start but you couldn't put after market pipes on it well they didn't makem back then for it it just wasn't the same bike they made the xt 350 the same up till 95 I think gotta remember I'm talikn Ontario - Canada I no different places they got different model's etcetc but hear cut off 1990-91 I think they didn't make 1 for approx. 3-4 years then they came out with that blue 1 the older 5 gear could of used a 6th or a taller 5th it seemed like it was gonna blow on the hwy I lit a cigarette off of 1 once that's how hot it was air cooled they got hot 20 - 40 yamalube I ran in mine changed it every 4 thousand max if they had a semi back then like a 15 40or 15-50 would of ran that don't think they did
Sehr Cool!! Du hast mich motiviert meine 3WS-002157 XT-500E (Ösiland) Bj. 91, mit >85.000km am Sattel, einen kompletten Overhaul zu unterziehen. Danke für das Video & Grüße aus dem südlichen Nachbarland :-)
Das Ergebnis sieht echt gut aus. Dazu braucht man nicht nur gutes Werkzeug und ne Werkstatt sondern auch Ahnung. Besonders im Motorbereich und die Kabelwirtschaft
Great job! How do you adjust the auto decompression cable on the xt600? I can’t find any service procedures or specification to this. Any help would be great!
Lovely work and like also how you adapt the music (classical..). My XT600 engine is ready for shipment, if you are willing to take it for full conversion to 700..
Ich habe auch eine Restaurierung gemacht, die nicht so ist wie die von Ihnen. Niemand hat bei der ersten Aufnahme angefangen, auch nicht im zweiten, vielleicht sogar im zehnten. Hahahaha💪
Hey that's a wonderful job, i have the same model sitting since last year and i wish i could do the same as you, how long time did it take you? and how much did you spend? i hope to find the courage to do it too!! :)
I don´t know exactly, it was arround 2 years and i spend way to much money. It´s nothing worth it, you make no deal when you make such restauration only for selling the bike... But it was fun and that is the main thing.
good motorcicle the yamaha 600 4t I has it one the model was 1990 and in blue fantastic bike ,but I havent see in your motor the electric starter?good luck with him
hope one day you,ll make a detailed video xt 600 restauration. Not a 10 minutes video but a 10 hours video or whatever it takes you to restore it. no cuts or fast foward. we would love to see the proccess step by step in real time. you can cut the video in 10 pieces one hour each or something. it would be awesome.thanks
If you installed the piston with lots of oil (which is good) then you have big smoke right after the first start but it should disappear after seconds. If you have always smoke after start then something is wrong...
Hi! Ein super Video. Auch die Motorenüberarbeitung! Du machst das nicht zufällig auch gegen Geld? :D Hab auch ne alte XT hier stehen und würde sie gerne wieder so schön machen wie deine hier ;)
Hallo, tolles Video!! Ich habe mir gerade eine XT 600 in Teilen geholt und habe mich gefragt, ob du mir vielleicht sagen könntest, was der Zug ist, der entgegengesetzt zum Dekozug weggeht, bzw. wohin er geht? Vielen Dank im Voraus😊
Hi, danke. Der Zug der entgegengesetzt zum Dekozug weg geht?? Es gibt an der Stelle nur einen Zug (Dekozug) der geht von unten vom Kickermechanismus nach oben zum Ventildeckel um dort drinnen beim kicken im richtigen Augenblick ein Auslassventil zu betätigen. Autodeko genannt.
My 1VJ start only with "start pilot" gas even if the the gasoline go to the carburator bowl (I cleaned all of it and I bought the special kit) but without start pilot gas impossible to start the engine. Do you know why ? Thank you in advance for the help ( I don't know what to do)
Hi Mandricity,ich habe ein Xt 600 2kf mit 58.000 km gekauft was gemacht wurde und ob uberhaupt das motor schon geöffnet wurde (keine rote oder schwarze paste zu sehen) weiss der vorbesitzer nicht.Er hatte nur seid ein ja (da motorrad ist von '89 also 30 jahre alt.Sehr schwer die ganze geschischte zu kennen. Er hat gar keine werkstatt-reschnung,weiss imprensiv,garnichts. Das motor kling gut aber 58000 fur ein einzylinder sind recht viel. Da ich von Hannover nach Italien fahren will wunderte mich ob es zu empfehlen ist mit ein motor denn ich garnicht kenne. Was wurdest du machen ausser ölwechsel,ölfilter und luftfilter? (bremse sind ok) Einfach zu werkstatt bringen und fur check up oder aus sicherheit irgendwelche bestimmte teil tauschen? Kuplung ist ok und steuerkette macht keine gereuche
Wo kann ich eine Liste finden mit all den Arbeitsschritten und Teilen die für so eine Arbeit nötig sind? Wie viele Stunden habt ihr daran gearbeitet? Was sind die Kosten für so eine Restauration?
Eine Liste mit allen Arbeitsschritten für eine komplette Restauration meinst du??? Mein Gott wieviele Tausend Seiten sollte die denn haben? :-) Da ich fast alles selber mache ausser Zylinder hohnen sind da wohl so 250 Stunden drin. Bei den Kosten kommt es stark auf den Zustand des Materials an. In der blauweissen stecken ca 1800 Euro und es fehlt noch eine neue Sitzbank und Edelstahlspeichen. Wenn man alles macht kommt man nur sehr sehr schwer unter 2500 Euro, lohnt sich also eigentlich garnicht...
I totally lost my words! Hey guys, I am thinking of buying an used XT 600. Is the engine durable and reliable? What is the engine lifetime measured in thousands of kilometers? Thanks.
Yeah. Well, that is a good answer. I have a repairman friend who advised me about the selection of second hand motorbikes. His advise was not to buy anything with more than 40 000 km on the clock. Thank you for the response.
Hi, richtig cooles Video, aber könntest du vielleicht ein Video machen, in dem du zeigst, wie man den Vergaser einer XT 600 richtig anschließt? Ich kann nämlich kaum bis gar keine Infos dazu finden. Würde mich freuen.
Richtig anschliessen? Oder komplett zerlegen und revidieren? Beim anschliessen gibts doch nicht so viele Möglichkeiten. Gasseile, Benzinschlauch links aussen, 2 Überlaufschläuche mitte u unten...
@@Mandricity Genau, mir ging es jetzt nur um das anschließen. Denn meine XT wurde 1999 stillgelegt, und stand jetzt ca. 10 Jahre bei uns im Schuppen. Ich habe mir die jetzt als Projekt vorgenommen bis ich meinen A2 Schein 2021 machen werde. Der Vergaser war schon ausgebaut und dann habe ich den erstmal gereinigt. Weil ich den halt nicht selber ausgebaut habe, weiß ich natürlich auch nicht genau wie und wo der denn angeschlossen werden muss. Am Wochenende habe ich versucht sie anzukicken aber der Vergaser lässt scheinbar kein Benzin durch. Aber immerhin wollte sie starten, als wir Bremsenreiniger bei offenem Vergaser reingesprüht haben und das ist schon mal erfreulich nach 20 Jahren Standzeit. Also werde ich mir glaube ich noch mal den Vergaser vornehmen müssen. Gruß
Stimmt es das die ansaugstutzen ab 1996 bei der xt verändert worden sind kleinere Durchmesser als bei einer 98er bj? Wenn ja woher bekommt man welche von einer xt 600 96er Baujahr? :o
Como sacar los bujes de la base del mono shop ósea la parte más pequeña de la tijera sabe en brazo mas pequeño tiene un vídeo de ese trabajo amigo del xt 600
I think he replaced the plastic parts.... I've been tryin' so hard to make them shine on my 2KF but there's no way.... I tried almost every product to restore plastic parts but none of them worked :-(((
Hi. I don´t replaced the plastics. I also tried so many products to let them shine but it was all crap. In the end i made an experiment with my hot air gun and that worked very good! Just use it like a paint gun. The surface melt a little and after that the plastics are nearly new. But be careful!
I'll try.... a friend of mine has a hot air gun with a digital display showing working temperatures, could you please suggest a range of temperature to prevent melting? I am so scared to make damages....
The only way is: full power! The surface should melt a little bit! You have to use it like a paint spraygun, very short and never hold on a spot. You can see the surface get shiny in the second you hold it.
Hallo, ich bin ein Xt600 2kf Besitzer und ich habe Probleme damit und kann dir keinen Rat geben. Kannst du etwas tun, um mir zu helfen, es zu beheben?.... I form poland
Well, I have to admit that I watched the video 2 times already and this is the 3rd.
I also enjoyed the music. Epic music for a legendary bike and a heroic restaurateur.
Well done, buddy!
thanks!
instablaster...
Amazing work, amazing edit, for an amazing bike.
The final result is just so beautiful, great work!
Thanks!
I have a 1988 XT600 with less than 9000 miles on it. Garage kept. With Super Trapp exhaust system. I’m going to repaint the frame, tank, and refinish the plastic. Your video gives me drive to do mine. 👍🏻
glad to hear that
ohne Worte einfach Hammer!!!
Faszinierend, eine Wahnsinnsarbeit, Hut ab! Du kannst dich glücklich schätzen, dass deine Frau dein Hobby nicht nur akzeptiert, sondern auch noch selbst fleißig mitmacht, auch ihr meinen größten Respekt! Lediglich die abgewetzte Sitzbank hättet Ihr bei dem ganzen Aufwand und Kosten auch noch neu beziehen lassen können.
Moin. Sitzbank kommt hoffentlich auch noch neu bei Gelegenheit. Technik war erstmal dringender...
..und erstmal teuer genug... :-)
Tu eres una inspiración para todos los que prefieren arreglar, rescatar a estas joyas. Que un día fueron las mejores motos del mundo. Felicidades!!!
Hola! Acabo de comprar una. Alguien tiene libros de la mecánica de la moto?
Nice job, nices timelaps.
Congratulations, very friendly bike.
Thanks!
geiles Nummernschild und super Arbeit, Respekt!
great job, congratulations !!
Wahnsinns job hab selten so ne gut restaurierte xt600 gesehen
Vielen Dank
awesome guys!xt '89 the best...i really admire this knowledge to restore. i ve got an xt600 2003 black, i turn it to white,i found plastics,which is in very good condition,but i really like this old xt...the 1989!
we like it too ;-)
Awesome work
Awesome bike, I had one 1988-1991, red white, never let me down 👍
Yeah i love it too.
I preferred the 84 up to 87-88 the red - white the 6 gear model blue 1 had e start but you couldn't put after market pipes on it well they didn't makem back then for it it just wasn't the same bike they made the xt 350 the same up till 95 I think gotta remember I'm talikn Ontario - Canada I no different places they got different model's etcetc but hear cut off 1990-91 I think they didn't make 1 for approx. 3-4 years then they came out with that blue 1 the older 5 gear could of used a 6th or a taller 5th it seemed like it was gonna blow on the hwy I lit a cigarette off of 1 once that's how hot it was air cooled they got hot 20 - 40 yamalube I ran in mine changed it every 4 thousand max if they had a semi back then like a 15 40or 15-50 would of ran that don't think they did
Exelente !!
Saludos desde Argentina.
Sehr, sehr geil gemacht! Klasse Arbeit, Respekt. Bin grad zwei 87er XT600Z am restaurieren.
bro, you're a master in your art! marvelous job!
Thanks!
Buna cine poate sami dea si mie un sfat am si eu acelas motor si nu mai porneste mio dat niste rateuri si acum nu mai da scantei va rog datimi un sfat
2kf is the best XT600 forerver 👍👍👍
Perfekte 👍
πολυ ωραια δουλεια φιλε.μπραβο σου.
Ich habe auch einige 2kf Restaurierung Ich bin nie zum ersten Schuss gegangen, du bist wirklich ein Meister
;-)
Super Arbeit.
Danke
great project!
Tebrikler, harika, müthiş!
Very great job, you are perfect in any part of mechanical difficulty, also your cigarette is nice ahah
;-)
Great job 👏
You are a genius!!
I don´t think so.
Just passion...
Nice. I have the same motorbike. I love it.
Sem palavras.....d+
Love it!!!!!!!
Great video, just about to start a 1980 DR650RS rebuild.
Very good job! =)
Bravo!
Very nice video!!!!
Thanks
Hey man, you're a magician!! Come to Portugal and do the same to my bike😁😁.Congrats on a great project.
;-) thanks
@@Mandricity ou ao governo!ia dar un jeitasso!😂😅sehr gut gemacht
Lief ja mega eazy an. Respekt :)
muy bien amigo yo compre una y voy haver lo mismo
saludos desde colombia.
genio !!! non e da tutti fare dalla A alla Z !!!!
Good job :)
:O NICE !!
Muito bom. Bela terapia.
Sechs wirklich außerordentlich zu Naples sagen wir: Sie er starker guaglió 👍👍👍👍
Und genau so würde ich auch dazu sagen, glaub ich... ;-)
Sehr Cool!! Du hast mich motiviert meine 3WS-002157 XT-500E (Ösiland) Bj. 91, mit >85.000km am Sattel, einen kompletten Overhaul zu unterziehen. Danke für das Video & Grüße aus dem südlichen Nachbarland :-)
Moin. Das freut mich! Dann wird ja wieder das Leben einer dieser schönen alten Kisten verlängert. Viel Spass damit. Grüße zurück aus dem Norden
Top
Bravo!!!!!
Thanks
Fantástico 👏👏👏👏🇧🇷🇧🇷🇧🇷
Das Ergebnis sieht echt gut aus. Dazu braucht man nicht nur gutes Werkzeug und ne Werkstatt sondern auch Ahnung. Besonders im Motorbereich und die Kabelwirtschaft
Danke für deinen Kommentar. Manchmal brauchte ich aber vor allem viel Geduld bei den vergammelten Schrauben... :-)
Great job!! How much oil is necesary when you change oil, and oil filter in a 2kf model?
Greetings from Spain!!
good bike
👏👏👏👏👏👏👏👏👏
Great job! How do you adjust the auto decompression cable on the xt600? I can’t find any service procedures or specification to this. Any help would be great!
there is an adjuster screw in the middle of the decomp cable. Free play of the decomp lever should be approx 2mm
I love my XT 600 motar my forever bike
perfect
thanks
Essa tava cansada de dias 😁😁😁😃🇧🇷👍👏👏👏
Gostei vcs são bom no que faz
dost dobře natočený!
Ist das ein geiles Projekt und ein super Video. Mit Kommentaren wäre es jedoch noch schicker!
Hi there! Great job! How long did it take you to finish the bike?
It was a complete year but just only weekend job...
Lovely work and like also how you adapt the music (classical..). My XT600 engine is ready for shipment, if you are willing to take it for full conversion to 700..
700cc ? That much?
👏👍
XT's werden uns alle überleben!
Das hoffe ich doch sehr! ;-)
Ich habe auch eine Restaurierung gemacht, die nicht so ist wie die von Ihnen. Niemand hat bei der ersten Aufnahme angefangen, auch nicht im zweiten, vielleicht sogar im zehnten. Hahahaha💪
Estou restaurando a minha estou muito feliz com o resultado ela é uma excelente moto
Mais a sua tá linda
the best,show
I can no longer think of selling my xt600 3tb 94 after seeing this video !!!!
Right!
Hey that's a wonderful job, i have the same model sitting since last year and i wish i could do the same as you, how long time did it take you? and how much did you spend? i hope to find the courage to do it too!! :)
I don´t know exactly, it was arround 2 years and i spend way to much money.
It´s nothing worth it, you make no deal when you make such restauration only for selling the bike...
But it was fun and that is the main thing.
Molto utile
XT show huashuashuas 😎
Richtig cooles Video , Ich habe auch ein Video in der ich meine xt vorstelle.
good motorcicle the yamaha 600 4t I has it one the model was 1990 and in blue fantastic bike ,but I havent see in your motor the electric starter?good luck with him
My model is 2kf. There never was an e-starter on it. First normal XT600 with E-starter was 3tb from late 1990/91 to 2000something...
hope one day you,ll make a detailed video xt 600 restauration. Not a 10 minutes video but a 10 hours video or whatever it takes you to restore it. no cuts or fast foward. we would love to see the proccess step by step in real time. you can cut the video in 10 pieces one hour each or something. it would be awesome.thanks
10h video?
maybe, one day...
Or maybe a very detailed xt restoration manual? i'd pay very good money for such a thing!
😢👍
Hi friend. Is that smoke after starting up normal? I restored one and when it starts up a lot of smoke comes out of the exhaust pipe
If you installed the piston with lots of oil (which is good) then you have big smoke right after
the first start but it should disappear after seconds.
If you have always smoke after start then something is wrong...
😀😀
Hi! Ein super Video. Auch die Motorenüberarbeitung! Du machst das nicht zufällig auch gegen Geld? :D Hab auch ne alte XT hier stehen und würde sie gerne wieder so schön machen wie deine hier ;)
Hallo, tolles Video!!
Ich habe mir gerade eine XT 600 in Teilen geholt und habe mich gefragt, ob du mir vielleicht sagen könntest, was der Zug ist, der entgegengesetzt zum Dekozug weggeht, bzw. wohin er geht?
Vielen Dank im Voraus😊
Hi, danke.
Der Zug der entgegengesetzt zum Dekozug weg geht??
Es gibt an der Stelle nur einen Zug (Dekozug) der geht von unten vom Kickermechanismus nach oben zum Ventildeckel um dort drinnen beim kicken im richtigen Augenblick ein Auslassventil zu betätigen.
Autodeko genannt.
14 years xt550. There was no plastics on the tank to break.
good gob
Hello, where did you buy your engine parts ? Bearings, piston, gaskets, etc. Yamaha parts are quite too expensive...
Many different Dealers in WWW
Tenho uma xt 600 porque será que o carburador da presao pro lado do filtro ele tinhaque sugar ne
I wish my snow blower started like that.
My 1VJ start only with "start pilot" gas even if the the gasoline go to the carburator bowl (I cleaned all of it and I bought the special kit) but without start pilot gas impossible to start the engine. Do you know why ? Thank you in advance for the help ( I don't know what to do)
something wrong with the choke...
Hard to explain for me in english
Hi Mandricity,ich habe ein Xt 600 2kf mit 58.000 km gekauft was gemacht wurde und ob uberhaupt das motor schon geöffnet wurde (keine rote oder schwarze paste zu sehen) weiss der vorbesitzer nicht.Er hatte nur seid ein ja (da motorrad ist von '89 also 30 jahre alt.Sehr schwer die ganze geschischte zu kennen.
Er hat gar keine werkstatt-reschnung,weiss imprensiv,garnichts.
Das motor kling gut aber 58000 fur ein einzylinder sind recht viel.
Da ich von Hannover nach Italien fahren will wunderte mich ob es zu empfehlen ist mit ein motor denn ich garnicht kenne.
Was wurdest du machen ausser ölwechsel,ölfilter und luftfilter? (bremse sind ok) Einfach zu werkstatt bringen und fur check up oder aus sicherheit irgendwelche bestimmte teil tauschen? Kuplung ist ok und steuerkette macht keine gereuche
Wo kann ich eine Liste finden mit all den Arbeitsschritten und Teilen die für so eine Arbeit nötig sind?
Wie viele Stunden habt ihr daran gearbeitet?
Was sind die Kosten für so eine Restauration?
Eine Liste mit allen Arbeitsschritten für eine komplette Restauration meinst du???
Mein Gott wieviele Tausend Seiten sollte die denn haben? :-)
Da ich fast alles selber mache ausser Zylinder hohnen sind da wohl so 250 Stunden drin.
Bei den Kosten kommt es stark auf den Zustand des Materials an. In der blauweissen stecken
ca 1800 Euro und es fehlt noch eine neue Sitzbank und Edelstahlspeichen.
Wenn man alles macht kommt man nur sehr sehr schwer unter 2500 Euro, lohnt sich also
eigentlich garnicht...
Was genau ist das bei 8:00 ? Würde auch Aluminium Tape alleine ausreichen bzw. schon helfen?
Das ist Glasfasermatte. Nur Alutape hilft nicht wirklich
I totally lost my words! Hey guys, I am thinking of buying an used XT 600. Is the engine durable and reliable? What is the engine lifetime measured in thousands of kilometers? Thanks.
It depends, something between 40 and 100...
Yeah. Well, that is a good answer. I have a repairman friend who advised me about the selection of second hand motorbikes. His advise was not to buy anything with more than 40 000 km on the clock. Thank you for the response.
Coole Mütze ;-)
Nicht wahr? ;-)
Bis Samstag...
Hi, richtig cooles Video, aber könntest du vielleicht ein Video machen, in dem du zeigst, wie man den Vergaser einer XT 600 richtig anschließt? Ich kann nämlich kaum bis gar keine Infos dazu finden. Würde mich freuen.
Richtig anschliessen? Oder komplett zerlegen und revidieren?
Beim anschliessen gibts doch nicht so viele Möglichkeiten.
Gasseile, Benzinschlauch links aussen, 2 Überlaufschläuche mitte u unten...
@@Mandricity Genau, mir ging es jetzt nur um das anschließen. Denn meine XT wurde 1999 stillgelegt, und stand jetzt ca. 10 Jahre bei uns im Schuppen. Ich habe mir die jetzt als Projekt vorgenommen bis ich meinen A2 Schein 2021 machen werde. Der Vergaser war schon ausgebaut und dann habe ich den erstmal gereinigt. Weil ich den halt nicht selber ausgebaut habe, weiß ich natürlich auch nicht genau wie und wo der denn angeschlossen werden muss. Am Wochenende habe ich versucht sie anzukicken aber der Vergaser lässt scheinbar kein Benzin durch. Aber immerhin wollte sie starten, als wir Bremsenreiniger bei offenem Vergaser reingesprüht haben und das ist schon mal erfreulich nach 20 Jahren Standzeit. Also werde ich mir glaube ich noch mal den Vergaser vornehmen müssen.
Gruß
Stimmt es das die ansaugstutzen ab 1996 bei der xt verändert worden sind kleinere Durchmesser als bei einer 98er bj? Wenn ja woher bekommt man welche von einer xt 600 96er Baujahr? :o
Como sacar los bujes de la base del mono shop ósea la parte más pequeña de la tijera sabe en brazo mas pequeño tiene un vídeo de ese trabajo amigo del xt 600
What's that soundtrack? ❤️
discribtion...
posta um video de como calibrar as válvulas
What did you do to the plastics?
I think he replaced the plastic parts.... I've been tryin' so hard to make them shine on my 2KF but there's no way.... I tried almost every product to restore plastic parts but none of them worked :-(((
Hi. I don´t replaced the plastics. I also tried so many products to let them shine but it was all crap. In the end i made an experiment with my hot air gun and that worked very good! Just use it like a paint gun. The surface melt a little and after that the plastics are nearly new. But be careful!
I'll try.... a friend of mine has a hot air gun with a digital display showing working temperatures, could you please suggest a range of temperature to prevent melting? I am so scared to make damages....
The only way is: full power! The surface should melt a little bit!
You have to use it like a paint spraygun, very short and never hold on a spot. You can see the surface get shiny in the second you hold it.
😲🥺😭
I got my first xt600e 1998 today but it's vibrating too much how can I do with those problems? Thanks in advance
Your XT is a model 1998 but your engine is based on a construction from the 70´
It has to be vibrating. ;-)
Hallo, ich bin ein Xt600 2kf Besitzer und ich habe Probleme damit und kann dir keinen Rat geben. Kannst du etwas tun, um mir zu helfen, es zu beheben?.... I form poland
I new have strong blaster power life motors
hey - suchste n Projekt ? ich hätte eins abzugeben...:-)
danke ich hab noch 5 ;-)))
Mozart Turk Mars
OLA EU TENHO UMA É ÓTIMA NÃO LARGO DELA JA MAIS 😉
CAÑONNNNNNN
!!!!!!!!!!!!!!!!!!!!!!!!!!!!
what year is this machine?
87-89
2kf model
+krystoph thanks
it should be the 1988 year model, mine (the "Limited", green/purple) was the last variation produced, in 1989