Mine was sitting there unused for two years covered in AZ dust, I'm surprised how easy it was to crank up. I just flipped power rocker to On and the beast went alive like no big deal, from 72F to 90F in 3 or so hours for 17000 gallon pool. Pentair intelliflo 2 VST was running at 3300 RPM.
I installed in myinground pool. I don’t have a spa just regular pool. I see in the menu pool temp and spa temp. Both are working but what’s the difference? Thanks
hi our pool heater is giving a message that says Rollout SW open. And we can't get it to spark. we are new to this type of heater. does it come with a remote at all?
Hi, I just bought this unit. For some reason I didn’t turn the pump off and opened all valves so there wasn’t a pressure build up in the heater and then closed the heater valves. This was so I could run the pump and bypass the heater to shock the pool. It sounded like pressure building in the heater so I quickly opened the valves again right away. Anyway it now says water switch open and won’t turn the heat on. Is there a reset for that or do you think I blew something up? I’m really beating myself up over this mostly because I have small kids that won’t be able to swim now because Dad screwed up. I learned to turn the pump off before closing/opening any valves. Any help would be so greatly appreciated! Thank you!
hello, I am getting a "no demand" message on my screen and it keeps saying spark. I hear it trying to spark, but it's not kicking on. have you seen the no demand error?
Any idea... My raypak is on rem on but the temperature reads the manual spa temp from the heater and is using that setting. When it first turns on it displays 84 which is the pentair control panel setting, then it changes to spa from the raypak heater setting and stays there. Temp can't be changed on heater control unless I take it out of rem on. Pool company changed a board in the heater last year, could it be hooked up wrong?
I got really lucky and found the female electrical connector to the water pressure switch came off. Once connected it came right on. I learned my lesson, always turn the pump off before opening or closing valves. Thanks for your help anyway.
So this is kind of crazy but I went out and checked it in the heater shut off it was reading 120°. In the back of my mind I couldn’t figure out how the electrical connection blew off. I remembered seeing the wires sitting on top of that Temperature sensor it was pushed up all the way to the top. I noticed as I pushed the temperature sensor down deeper the water temperature began to drop to normal temperatures. I realized what happened was when the pressure built up in the system from closing those valves it pushed the temperature sensor Up and that’s what blew the wire off the water pressure sensor. So there was a few chain of events that happened which caused the heater to not function properly. I got everything back in order and it is functioning as it should.
Luke I'm getting power but the display isn't lighting up. The previous owner used to have to push several buttons to get it to wake up and display. I can't remember how he did it. Do you have any suggestions?
Michael, did you ever find the answer to your problem. I have exactly the same model and am getting the same error and most of the info on the web seems relatively useless.
+Bad Alice - The only error code I see is "Sensor Failure" and when I try to find it on the Raypak site I find nothing specific but it looks like it could be the thermocoupler or temperature sensor.
Pool heaters are complex machinery. I can't fix a hvac ac unit or a water heater. With anything Gas related a recommend contacting a professional. Fix it wrong could result in a fire or someone's death.
Mine was sitting there unused for two years covered in AZ dust, I'm surprised how easy it was to crank up. I just flipped power rocker to On and the beast went alive like no big deal, from 72F to 90F in 3 or so hours for 17000 gallon pool. Pentair intelliflo 2 VST was running at 3300 RPM.
I'm looking to purchase this unit. What regulator is need or does it have an automatic adjustment where a regulator is not needed?
im about to install one of this but wondering if 1/2 gas pipeline is thick enought to this heater?
I installed in myinground pool. I don’t have a spa just regular pool. I see in the menu pool temp and spa temp. Both are working but what’s the difference? Thanks
hi our pool heater is giving a message that says Rollout SW open. And we can't get it to spark. we are new to this type of heater. does it come with a remote at all?
Meagan Williams call a pool professional to come repair it.
we actually figured it out from you tube videos. thanks!
I just replaced my Raypac bezel control and I need to know if I have to wait until my pool is running to check to see if it works.
yep... Pool needs to be open and operational to test out the pool heater
@@lukepoolservice i need to know if the display should be working if the pool is not running. Right now it is black.
If the screen looks off by half a line or garbled, how do you fix that?
Hi, I just bought this unit. For some reason I didn’t turn the pump off and opened all valves so there wasn’t a pressure build up in the heater and then closed the heater valves. This was so I could run the pump and bypass the heater to shock the pool. It sounded like pressure building in the heater so I quickly opened the valves again right away. Anyway it now says water switch open and won’t turn the heat on. Is there a reset for that or do you think I blew something up? I’m really beating myself up over this mostly because I have small kids that won’t be able to swim now because Dad screwed up. I learned to turn the pump off before closing/opening any valves. Any help would be so greatly appreciated! Thank you!
Call for help. Complex machine.
hello, I am getting a "no demand" message on my screen and it keeps saying spark. I hear it trying to spark, but it's not kicking on. have you seen the no demand error?
I am getting hi limit 2 fault and water temperature is not going up,can you help me please?
@@dddpatel8813 call a pool professional
love video thanks
My heater is showing that the panel is locked and requires a pin to unlock it and use it manually. How do I unlock it?
Does this unit have an app or timer?
Raypak doesn’t have an app. Would have to do 3rd party.
@@lukepoolservice ok thank you!
Any idea... My raypak is on rem on but the temperature reads the manual spa temp from the heater and is using that setting. When it first turns on it displays 84 which is the pentair control panel setting, then it changes to spa from the raypak heater setting and stays there. Temp can't be changed on heater control unless I take it out of rem on. Pool company changed a board in the heater last year, could it be hooked up wrong?
Raypak heaters reststarting
What is the minimum speed required for this heater to run? I have a variable pump and I am not sure about the speed needed. Thanks.
Depends on the pool. I would say 2500
On your gas line. I didnt see a union. How did you plumb it without a union??
😅
How do you override a low temp lockout on this heater?
You can’t. It’s a part of the safety circuits to prevent damage to the heater and potentially voiding the warranty.
You’ll risk the chance of condensation. You don’t want that
What should I do if it keeps shutting off and on
Clean filter
Which filter the spa filter or furnace
How long does it take to heat
Varies
Anyone who calls our office, I can't give advice out over the phone. I recommend finding a local pool professional to help.
I got really lucky and found the female electrical connector to the water pressure switch came off. Once connected it came right on. I learned my lesson, always turn the pump off before opening or closing valves. Thanks for your help anyway.
So this is kind of crazy but I went out and checked it in the heater shut off it was reading 120°. In the back of my mind I couldn’t figure out how the electrical connection blew off. I remembered seeing the wires sitting on top of that Temperature sensor it was pushed up all the way to the top. I noticed as I pushed the temperature sensor down deeper the water temperature began to drop to normal temperatures. I realized what happened was when the pressure built up in the system from closing those valves it pushed the temperature sensor Up and that’s what blew the wire off the water pressure sensor. So there was a few chain of events that happened which caused the heater to not function properly. I got everything back in order and it is functioning as it should.
Luke I'm getting power but the display isn't lighting up. The previous owner used to have to push several buttons to get it to wake up and display. I can't remember how he did it. Do you have any suggestions?
William Buckley did you find an answer to your issue? I’m having the same issue.
Same my pool heater will not light up
I am getting a sensor failure message and the unit won't fire up. I have a Raypak R266A heater. Any clues?
+Michael Lee Best to contact Raypak directly for assistance or find a local pool professional who can handle the issue.
Michael, did you ever find the answer to your problem. I have exactly the same model and am getting the same error and most of the info on the web seems relatively useless.
the unit should provide you an error code.
+Bad Alice - The only error code I see is "Sensor Failure" and when I try to find it on the Raypak site I find nothing specific but it looks like it could be the thermocoupler or temperature sensor.
www.poolsupplyunlimited.com/Products/Manuals/Sub160_201362472241.pdf
How do you turn "Rem off" to "Rem on" ??
Did you figure it out? Mine show Rem Off, and it's not heating my spa water.
I figured it out a year ago, I couldn't wait for these guys to help me.
@@williamhickerson4316
What does water sw mean
What does water sw open mean
what does scensor error mean
+Victoria Shed Tell me exactly what the message says.
Pool heaters are complex machinery. I can't fix a hvac ac unit or a water heater. With anything Gas related a recommend contacting a professional. Fix it wrong could result in a fire or someone's death.
Lo