UV レジン | DIY UV Resin Craft & Accessories |No mold Make your own Bezel Frame | UV resin earrings

Поділитися
Вставка
  • Опубліковано 30 вер 2024
  • HOW TO MAKE AN UV RESIN JEWELRY?
    Hello, Everyone!! In this video, I am making another UV resin earring. I have used craft wire to make the frames and the used UV resin and rhinestone chain, silver foil and finally, add earring hooks here.
    From wire frames, to using the resin then the assembling of the earring pieces to create one complete earring, ready to be worn.
    DIY fashion accessories at home. Design your own earrings.
    PLEASE FOLLOW NECESSARY SAFETY MEASURES WHILE USING RESIN OF ANY KIND. DON'T FORGET GLOVES AND MASK. CARRY OUT RESIN RELATED WORK IN AN OPEN OR WELL VENTILATED AREAS.
    Don't forget to LIKE, SHARE and SUBSCRIBE!!
    ------------------------------
    Materials:
    1mm thick aluminum wire: s.click.aliexp...
    Seamless tape: s.click.aliexp...
    Gas mask: s.click.aliexp...
    UV Resin: s.click.aliexp...
    Silicone brush: s.click.aliexp...
    Colorant: s.click.aliexp...
    Silver/Gold foil: s.click.aliexp...
    Rhinestone chain: s.click.aliexp...
    Earring hooks: s.click.aliexp...
    Archimedes drill: s.click.aliexp...
    ------------------------------
    #DIYresinart #uvresin

КОМЕНТАРІ • 35

  • @samuelfriday2021
    @samuelfriday2021 6 місяців тому +1

    What type of wire is recommended for bezels making? Or normal Cooper wire will be ok

    • @CharmsDIY
      @CharmsDIY  6 місяців тому

      I recommend copper craft wires. It bends easily, is not soft as aluminum wire, so it retains the shape well. Normal copper wire works as long as it doesn't break easily, also the thickness should be at least 0.8 mm.

  • @debrasmith3764
    @debrasmith3764 6 місяців тому +1

    I love your work & channel ! I have saved many videos of your’s. Where do you get your supplies (wire, earring findings, necklace chain) they all match in color). Thank you so very much

    • @CharmsDIY
      @CharmsDIY  6 місяців тому +1

      Thank you!!☺ I got most of them online from Aliexpress. Some like earring hooks and rhinestone chain, I bought them from my local stores, they are available online as well.

  • @artisanvero8626
    @artisanvero8626 6 місяців тому +1

    Beautiful and fine Artisan work. Congratulations. I love this video. Thank you. Greetings from Puerto Rico 🇵🇷

    • @CharmsDIY
      @CharmsDIY  6 місяців тому +1

      Thank you so much!!🥰❤❤

  • @annadoris
    @annadoris 6 місяців тому

    What gage wire do you use and when you are straightening the wire are you flattening it ? Thank you

    • @CharmsDIY
      @CharmsDIY  6 місяців тому

      I am using gauge 18 wire, 1mm thick. I don't flatten the wire. I just make adjustments and fix the shape of the frames as required.

  • @marisahernandez8606
    @marisahernandez8606 6 місяців тому +1

    Your work is always amazing! ❤

    • @CharmsDIY
      @CharmsDIY  6 місяців тому +1

      Thank you so much!🥰

  • @margaretjohnson1283
    @margaretjohnson1283 Місяць тому

    These are so beautiful. Thank you for the tutorial.

    • @CharmsDIY
      @CharmsDIY  Місяць тому

      You are so welcome!❤

  • @vickyewilliams5764
    @vickyewilliams5764 6 місяців тому

    Beautiful! Where do you buy your tiny letters?

    • @CharmsDIY
      @CharmsDIY  6 місяців тому

      I buy holographic tiny letters from AliExpress. Here, I haven't used any though. I wonder if you are talking about tiny pieces of silk thread. If so, I just cut silk thread into tiny pieces.

  • @rosemarybrennan7006
    @rosemarybrennan7006 6 місяців тому +1

    Beautiful ❤😊😊😊😊😊

  • @asimawan2617
    @asimawan2617 5 місяців тому

    V beautiful nd simple idea. So nice of you

  • @avriljonassaint-cathie7542
    @avriljonassaint-cathie7542 6 місяців тому

    I have learned a lot by watching your videos. Any tips or suggestions for completed pieces being sticky or becoming dull after top coat applied?

    • @CharmsDIY
      @CharmsDIY  6 місяців тому +1

      Sticky UV resin is usually due to oxygen inhibition layer. I frequently used to have those problems in the beginning but not much anymore. I avoid it by bringing the UV light as close to pieces as possible. I believe bringing the light close to pieces cures them faster that decrease the chances of forming the inhibition layer. I may be wrong but it works for me. I also leave the pieces out in the sunny days for some time. Some cure it under water to avoid the sticky layer. I suggest you a video on UV resin remaining sticky (don't remember the title) by Daniel Cooper. He has explained it well.

    • @avriljonassaint-cathie7542
      @avriljonassaint-cathie7542 6 місяців тому

      @@CharmsDIY Thank you for responding. I appreciate you sharing your work.

  • @A.F.-kq5ig
    @A.F.-kq5ig Місяць тому

    Wie immer wunderschön, aber auch immer ein Geduldsspiel ❤

    • @CharmsDIY
      @CharmsDIY  Місяць тому

      Geduld ist ein Muss...Vielen Dank!!😊

  • @peggybutron4599
    @peggybutron4599 6 місяців тому +1

    Very pretty

    • @CharmsDIY
      @CharmsDIY  6 місяців тому +1

      Thank you! 😊

  • @qwerasdf9422
    @qwerasdf9422 6 місяців тому +1

    🥇

  • @missy5269
    @missy5269 Місяць тому

    Beautiful!

  • @cb4473
    @cb4473 6 місяців тому

  • @sumathis1689
    @sumathis1689 6 місяців тому

    Wow sooo beautiful ❤

    • @CharmsDIY
      @CharmsDIY  6 місяців тому

      Thanks a lot 😊

  • @LetsRaisein
    @LetsRaisein 6 місяців тому

    👌