I hate Chevy engines in fords but I could thinking of a few reasons why someone would. The 5.3 or 6.0 Chevy are plentiful and super easy to swap into something, even the wiring harness is if you know the easy way around it. also if a Chevy wants a competitive lightweight car it doesn't get better than a mustang.. A lot of people say the ls are so much cheaper to build but usually from what I see it cost about the same as a 351w if not more than it.
jldude84 im building a 351w stroker right now and some of the parts cost about the same as an LS if not less and you'd be a able to retain the ford drivetrain
It's not just cost but what you get for your money. Dollar for dollar the ls series can't be beat as far as making power. that said, my Trans Am is LSx powered and my notch will stay Ford powered ;)
They are beautiful and definitely an acquired taste.. I used to think they were the ugliest things on Earth, now I see them and all I can do is stand there and admire :D
That's one bad ass 331. I have a 87 fox with a Keith Craft N/A 347, 5 speed and my best time is a 10.40. Your car and my car sound exactly the same through my computer. Lol. That's a very impressive 331! Great job!
Honestly even If you hate Fords you still have to like this video. That thing is tuned to perfection and he drove the snot out of it. If you go thumbs down on this video its only because you'd hate to in the lane next to this one. This is how you get it done. Two thumbs up.
He's doing this so he can see how the drive train is working, plus to show you or us people what it's like to see the going on's of a drive- train of a racecar! Great video!
Naw he was staged on the back tires. It was a fluke. Go back and watch that pass you’ll see the staging lights flash as he rolls through them. And there’s no one standing by the beams. It’s around 5:47
@@Quarterhorse2 Are you just switching out bottom end to 347 stroker and using everything from your 331 build cause your head,cam,intake etc seemed to be very affective combo breaking into 9s NA with 5spd stick shift car is impressive without a power adder
@@miker1681 Thank you but...No! As a matter of fact everything is anew combination. Block, heads cam intake, trans, clutch etc... The goal is 650 hp all motor. If we can get a solid 650 I'm gunning for 8.9X slip.
@@Quarterhorse2 I am guessing you are running solid roller cam on race gas to get those numbers ? What heads this time ? I believe when i saw your previous setup it was AFR 205 victor jr intake and carburetor with alot of gear never asked what ratio but if i where to guess around 4:33 / 4:56 am i close ?? I look forward to seeing your car and i will hopefully be done with mine also ( currently have 3 different builds ) 95 cobra w/306 plus a 96 4.6 gt and 95 gt w/302 drift car all of them are modified/built by my son and me on a very small budget in our own garage here in ct
@@miker1681 Yes and yes! Solid .730 lift 268/276 @ .050 Using AFR 220 heads and a Super Victor w/ some port work. The 4.56 gears I used to run are getting swapped w/ 4.88 gears.
Wow.. Awesome car, awesome driving.. Awesome video! Love the split screens! I've been out of racing since I was in a near fatal car accident in 2008 (not racing related), and this has got me itching BAD to race again!! Definitely thumbs up from me!
Any info on your setup (engine/trans)? Like everything about this, from your driving style/skill to how it sounds and the function of everything. Keep it up!
Quick question for you (out of curiosity). Why do you go "opaque" for your burnouts? Are you trying to hide something from possible competitors?? BTW, your N/A times are faster than my nitrous times. :(
NED! For a time, back in the 89-90 era... to my knowledge, I had the fastest stone stock 5.0 at NED. 14.13 @ 98.46. 1989 LX coupe 5speed with 2:73 gears. I ordered the 3:08 but didn't get them for some reason.
Nice car! Awesome views with the GoPro, too. Always cool to see what's really going on under the car when it's in motion. Looks like the car runs pretty consistently, what tires do you run front and rear?
What hci combo are you running and what's the CR ? I have a 9.9:1 306 with ported gt40p heads and cobra intake, f cam, 75mm TB, 88mm maf, 30lb injectors and made 300whp. But I'm ready for more. I want to build a higher comp 11:1 331 or 347. I could turbo it and go faster for cheaper but that's not really what I looking for. I loved the torque of my old 11:1 4V Cleveland. I really regret selling that car and engine. The 4V are worth a tons now.
That’s a synchronized tko 600 ? I just ordered a tko 600 from liberty transmission with all the good stuff but still with synchros for my 85 notch with a nicely done 347 hydraulic roller Comp 282 cam , afr 185s. 10:1 compression. Looking forward to finishing my car.
What all do u have done to the motor I too have a 95 mustang gt 5.0 round body any suggestions on motor work plan on putting a twin turbo after motor work is done
I have a 92 notch 5.0 so far 11.98 this year will be 11.5s. Not a lot of $$ involved stock block and rotataing assembly, I'm going to run 10 s very soon! Don't think a 301 Chev could do what my all Ford notch is doing for the same $$.
I'm all ears.I'm a chevy guy but just finally got a car I've wanted for years 64 and a 65 Falcon,1 I'm going to make into a Gasser w/straight front axle the other slammed bigtire drag car,just don't know much about the fords,gasser will have a 302 the other 351w.
Shes runnin good.. What setting do u run on your rear strange shocks? I have single adj rear shocks n front strange struts. What settings do u run? If u dont care lettin me know.. Jus a newbie lookin for a good start..
This is a perfect example on why there's no need to LS a foxbody unless you don't know how yo build a ford motor
Happy with my 331 but an alternative to a new edge motor would be a Coyote without a doubt!
I hate Chevy engines in fords but I could thinking of a few reasons why someone would. The 5.3 or 6.0 Chevy are plentiful and super easy to swap into something, even the wiring harness is if you know the easy way around it. also if a Chevy wants a competitive lightweight car it doesn't get better than a mustang.. A lot of people say the ls are so much cheaper to build but usually from what I see it cost about the same as a 351w if not more than it.
jldude84 im building a 351w stroker right now and some of the parts cost about the same as an LS if not less and you'd be a able to retain the ford drivetrain
Kevin Dean more less who much did u spend to go that fast
It's not just cost but what you get for your money. Dollar for dollar the ls series can't be beat as far as making power. that said, my Trans Am is LSx powered and my notch will stay Ford powered ;)
Ford small block power when done right!! Great job!!!
Thanks!
One of the best drag racing videos I have seen! Very impressed with the stone cold times for running a manual trans! Awesome work!
Thanks! Appreciate it
I honestly was inpressed with how much contact the front tires had the whole pass! Great job
Thank you I appreciate it!
i think fox body mustangs are the most beautiful mustangs ever made
They are beautiful and definitely an acquired taste.. I used to think they were the ugliest things on Earth, now I see them and all I can do is stand there and admire :D
yes mr. bravo
Awesome mustang that's what Ford power will do for ya. Very nice shots with the gopro
I could listen to this thing rev all day! It's a symphony ! : )
Ha... It's sleep therapy music for me
Quarterhorse2 What WILL it rev to? 9000? I'll bet it's peak HP is near or at 8k from the sound of it....
Two kinds of cars,FORD and can't Afford!! Car speaks for it self,mad respect!
THANK YOU MAN!
Quarterhorse2 That thing is a beast! !!
oh my god that thing is a MONSTER! and you sir shift faster than anybody ive literally ever seen lol mad respect brother
That's one bad ass 331. I have a 87 fox with a Keith Craft N/A 347, 5 speed and my best time is a 10.40. Your car and my car sound exactly the same through my computer. Lol. That's a very impressive 331! Great job!
Honestly even If you hate Fords you still have to like this video. That thing is tuned to perfection and he drove the snot out of it. If you go thumbs down on this video its only because you'd hate to in the lane next to this one. This is how you get it done. Two thumbs up.
He's doing this so he can see how the drive train is working, plus to show you or us people what it's like to see the going on's of a drive- train of a racecar! Great video!
I love the way this car runs. Badass when you bang the gears and doesn't miss a beat 👍👍👍👍👍👍
Thanks man! Much appreciated 👊🏻
if I could give you 100 thumbs up I would. simple, no bullshit, get it done build! awesome!
Bad! There ain't nothing like a stick car, especially a stang like this dude's...great car bro & from what I see & hear...well built also!
I love the under car angles. So damn cool dude.
ppmguire I love watching how fast that drive shaft snaps around! Like nothing going on and then it’s a blur!!
Love the car sounds great looks amazing great driving! Makes me wish my 87 coupe was done!!!
Nathan Pedigo Thank you I appreciate it!
Awesome. Sounds great at idle.
Nice a/c. Unusual in a race car.
Thank you it gets hot! 🥵 you need a fan👍🏻
Sweet video beautiful car
Damn your the man to bracket race and be that consistent with a 5 speed
Thanks!
BAD. ASS. Banging those gears like a champ! Sick 60ft!!
Great shifting!! I am impressed, as well. Keep it up.!
Thank you!
6 people gave thumbs down. Who in their right mind would do that. Awesome car.
04KBSVT Thank you...I guess you can't please everyone...I'm no expert with video editing but I do my best...Learn as I go
Quarterhorse2 nothing you couldve done to the video. always haters
04KBSVT 2 year old comment, but probably his jealous friends lol
There's 15 jealous Soyboys that have gone Thumbs Down now......so dumb.
has to be LS kids
Siiickkk Mustang right there buddy!!! Solid runs in a 5spd!!
great gopro action!! badass red fox love seeing that 5 speed shifting great job!!
Awesome video! Looking forward to Windham racing.....
Damn dude you ran that 9 down like it stole your money. lol
It did! LOL Thanks!
Naw he was staged on the back tires. It was a fluke. Go back and watch that pass you’ll see the staging lights flash as he rolls through them. And there’s no one standing by the beams. It’s around 5:47
Love the different shots u took it pretty sick nice vid
Thanks!
Launches, shifting, camera work, well done!
+1990notch Thanks!
great footage. masterful launches and shifts. T5 Bandit :)
SarahJ743 Thank you! Check out my other vids too :)
Love it. Your car looked just like mine. Awesome. Mine was a 82 coupe, 377ci. Best time (9.96@144). Good job.
+Brian Coats Thanks! Good luck with your ride!
That is a stout FSB. Great shifting too. And a very well shot and produced video.
Thanks I really appreciate it. race car driver / video guy :) I do it all.
Met driver in NH super great guy and happy to talk my son and i about his sweet 331 NA Ford powered fox body mustang Much thanks bro
My pleasure. Always fun talking to people at the track.:) Drop by in 2020 if ya see me, 347 power is coming!
@@Quarterhorse2 Are you just switching out bottom end to 347 stroker and using everything from your 331 build cause your head,cam,intake etc seemed to be very affective combo breaking into 9s NA with 5spd stick shift car is impressive without a power adder
@@miker1681 Thank you but...No! As a matter of fact everything is anew combination. Block, heads cam intake, trans, clutch etc... The goal is 650 hp all motor. If we can get a solid 650 I'm gunning for 8.9X slip.
@@Quarterhorse2 I am guessing you are running solid roller cam on race gas to get those numbers ? What heads this time ? I believe when i saw your previous setup it was AFR 205 victor jr intake and carburetor with alot of gear never asked what ratio but if i where to guess around 4:33 / 4:56 am i close ?? I look forward to seeing your car and i will hopefully be done with mine also ( currently have 3 different builds ) 95 cobra w/306 plus a 96 4.6 gt and 95 gt w/302 drift car all of them are modified/built by my son and me on a very small budget in our own garage here in ct
@@miker1681 Yes and yes! Solid .730 lift 268/276 @ .050 Using AFR 220 heads and a Super Victor w/ some port work. The 4.56 gears I used to run are getting swapped w/ 4.88 gears.
great car and video.... congrats!
good stuff dude 9s i like the fact thats its manual im so jelous
Nice driver mod! Sweet launches and shifting !
Thank you!
Shift the hell out of that thing!!! I love it
Wow.. Awesome car, awesome driving.. Awesome video! Love the split screens! I've been out of racing since I was in a near fatal car accident in 2008 (not racing related), and this has got me itching BAD to race again!! Definitely thumbs up from me!
Sorry about your accident..But happy your sitting here today. Thanks! Follow your dreams~
I want to see more of this n/a beast
sick video and sick shifting!!! Bad ass!!!
+adam bender Thank you!
Damn nice ass launches my friend
Northern Illinois Street Racing Thank you!
Quarterhorse2 I6
Thank you!
That is some excellent footage and great editing. Nice job ! Your Mustang rocks too !
Hope you're doing well and I hope you still have this beast. You are driving the absolute hell out of that car by the way and I love it. Take care.
Good shifting man and nice car and runs
sweet all FORD Stang, nice and proud to represent
The under the car camera mount is sick!
Yeah that is a solid bad ass car that just runs consistent nice ride brother..
Thanks!
The most excellent video I've ever seen
Thank you VERY much! I appreciate that!
More people need clean vids like this, you should have way more subs, props sir!
Thank you!
I have so many questions... teach me!( new idol )
You nailed it all around.
Thank you!👍🏻
One word....Beautiful
Thank you!
Good car and good driver is what gets it done, \m/.
Thank you!
Very nice sir!
Scrun Johnson Thanks!
Cool vid. Quarterhorse cooler name lol
This is a great video. those camera angles are so cool!
***** Thank you! Having fun :)
***** Thank you...running out of ideas LOL
love the different views and gear banging
Killer video editing!
Nice ride
holy moly i love this video
Any info on your setup (engine/trans)? Like everything about this, from your driving style/skill to how it sounds and the function of everything. Keep it up!
thought mine was quick,boy that car of yours hits a nasty lick.rock on
LOL
Your video quality is excellent just like your car!!! That was fun to watch with all of the different views. Subscribing. GREAT WORK!!!
Quick question for you (out of curiosity). Why do you go "opaque" for your burnouts? Are you trying to hide something from possible competitors?? BTW, your N/A times are faster than my nitrous times. :(
Thank you!
Great car!
Yeah buddy !!!!!!!!!!
Nice footage
Very impressive.
nice car bad ass and all Ford
Bad ass video! 💪🏼👊🏼
Thank you!! IYou can check out my Channel I have some good vids🤟🏻
This rabid fox is headin to the hen-house !!
LOL!
Quarterhorse2
Awesome camera work and hell of an engine ! Not to many 0ld school N/A stick cars Out ther . . 👍👍
NED!
For a time, back in the 89-90 era... to my knowledge, I had the fastest stone stock 5.0 at NED. 14.13 @ 98.46.
1989 LX coupe 5speed with 2:73 gears. I ordered the 3:08 but didn't get them for some reason.
That’s a great mph & time! I remember my friends brand new LX hatch running 13.90’s with M&H cheater slicks, cai , 3.73’s
That shits awesome... sound & driving A+++ lol
Nice job!!
Thank U!
i want my 331 to rip like that haha
Sweet Alsome video 💪💪💪
damn good footage!
Lifted the front wheels...Damn!
Nice car! Awesome views with the GoPro, too. Always cool to see what's really going on under the car when it's in motion. Looks like the car runs pretty consistently, what tires do you run front and rear?
Thanks! love those Gopro cams,,,26 front runners & 28 ET Drags
Drive that thing son!
That's one bad mutha!
+John Derk Thank you!!!
What hci combo are you running and what's the CR ? I have a 9.9:1 306 with ported gt40p heads and cobra intake, f cam, 75mm TB, 88mm maf, 30lb injectors and made 300whp. But I'm ready for more. I want to build a higher comp 11:1 331 or 347. I could turbo it and go faster for cheaper but that's not really what I looking for. I loved the torque of my old 11:1 4V Cleveland. I really regret selling that car and engine. The 4V are worth a tons now.
That’s a synchronized tko 600 ? I just ordered a tko 600 from liberty transmission with all the good stuff but still with synchros for my 85 notch with a nicely done 347 hydraulic roller Comp 282 cam , afr 185s. 10:1 compression. Looking forward to finishing my car.
Awsomeness Level Achieved!!!
cool video
Friggin impressive! What's the set up in your 331?
Nice video!
Very fast mustang, considering its all motor, that's wassup!
What kind of block are you using.
TKO II face plated by Hanlon Motorsports
Centerforce DF
31 spline Moser axles
Thanks!!
What all do u have done to the motor I too have a 95 mustang gt 5.0 round body any suggestions on motor work plan on putting a twin turbo after motor work is done
I have a 92 notch 5.0 so far 11.98 this year will be 11.5s. Not a lot of $$ involved stock block and rotataing assembly, I'm going to run 10 s very soon! Don't think a 301 Chev could do what my all Ford notch is doing for the same $$.
Excellent
You guys do run open headers. Wasn't for sure until you had the cam under the car. Cool car by the way.
I've got a 1976 Camaro with a built 350 in it. It's got a 3/4 race cam, double pumper, glass packs, and slicks. It would wax that Mustang.
Very nice!
lol. 3/4 race cam. Okay pops, time to take your meds.
You can definitely shift that beast!!! Trans??
That was a face plated Tremec TKO
Love the different angles,bad ass ride!! Would love to know whats' in the motor..
Thanks! Hard to come up with new material as far as racing views.. Not much $ in the motor, just the right matching parts.
I'm all ears.I'm a chevy guy but just finally got a car I've wanted for years 64 and a 65 Falcon,1 I'm going to make into a Gasser w/straight front axle the other slammed bigtire drag car,just don't know much about the fords,gasser will have a 302 the other 351w.
that bad bitch hooks up!!!!!!!
Shes runnin good.. What setting do u run on your rear strange shocks? I have single adj rear shocks n front strange struts. What settings do u run? If u dont care lettin me know.. Jus a newbie lookin for a good start..
Cool frecking car! But may i.ask What heads are you running and when are you shifting?
AFR 205 @ 7300
OUTSTANDING! Have you thought about doing another vid with a foot cam view?
Thanks! That's a good idea, that will be next!
Very good for N/A!!! I wonder if you boost it up.... ;-)