How I Fixed My Faulty Makita Battery
Вставка
- Опубліковано 1 лип 2017
- How I Fixed My Faulty Makita Battery
Products Used Amazon Links
Click Links For More Information & Or To Purchase
Makita Fast Charger - amzn.to/2APrzVa
Makita Twin Port Rapid Charger - amzn.to/2APkHr1
Makita 18V 3.0 Ah Li-ion Battery - amzn.to/2zJjbH8
Makita 18V 4.0 Ah Li-ion Battery - amzn.to/2E11822
Makita 18V 5.0 Ah Li-ion Battery - amzn.to/2E1c6of
Hope This Helps Somebody.
Any questions or comments please leave below.
For more please check my channel, hit the like button and subscribe.
Adding more videos every week.
Hope you enjoyed Watching Thank You.
Disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
This help support the channel and allows us to continue to make videos like this. Thank you for the support Guys. - Навчання та стиль
![How to repair makita battery for $12 [easy fix with using repair kit -new pcb and housing]](/img/n.gif)
Scooby Doo!. 20 minutes all wired up worked a treat. Saved on a new battery. Kudos. Thanks and God bess
You are welcome, I’m so glad it worked for you & thank you for watching really appreciate it. Hope you having great weekend
This video worked perfectly and was the most non invasive for me. Thanks for taking the time.
Just wanted to say I did this and it worked! FullGood battery charging faulty battery for 20mins. Thanks so much for this video!
Thank you for the positive feedback really appreciate it. I am glad I could help
X
Good advice never gets old. I followed your video and revived two batteries from the grave. Thanks for making the video and for sharing.
Yay! I'm trying this right now.
Worked for me. Revived 6amp battery with the 5 amp. Cheers mate. This video saved me 90 quid.
So glad I could help & thank you for the feedback. I think we are one of the lucky ones who didn’t have battery leaking acid or circuit board damage in the battery. Thank you for watching I really appreciate it. Hope you’re having a great day
Awesome I jumpered my Ryobi 3ah to it for about five minutes and bam 9.6 to 18 something volts. The reason for my voltage drop was years between charges while in storage. Charges now, thank you so much!
Hi Kevin, So glad it worked for you & thanks for watching really appreciate it.
My Makita impact drill battery would not charge, after being left flat for six months, and I tried fitting and removing it rapidly from the charger repeatedly in quick succession to 'reset the chip' but this did not work. So, after watching your video Scooby Rolla I did not have a second battery to use as you have done, so I used an old 16V, 0.5amp charger which I had lying around home from some unknown appliance or radio long gone from my home, and I stripped the two wires coming out of the charger and hooked them to the dead Makita battery for about an hour and then tried the battery in the charger. Bingo, the battery charged right up to full, and now I don't have to do anything further to it. Your video made me try this idea, and it worked. Thanks very much.
Good job scooby, i also have at least four of these makita batt packs that wont charge, some I haven’t even used in a tool before. I’m going to give this method a go. Thanks for taking the time to share your experience, i appreciate it.
Hi Adam, got my fingers crossed for you but I think it should work for you as your batteries are below the level to charge & doesn’t sound like damaged battery cells. thank you for the positive feedback & thank you for watching really appreciate it. Hope you are having a great day & it works for you
Scooby Rolla I managed to transfer a charge into the flat battery packs, even up to 18v but the charger still rejects them as I believe there is a built in circuit board that bricks them once they have been rejected by the charger a number of times. All the ones that are no good are 1.0 ah packs, both of the 3.0 ah packs I have haven’t given any problems. It has been an interesting experiment anyway, have a great day my friend.
Thanks for the video I’m up and running as a result of your time and efforts thanks so much
Chris
Instablaster
Worked like a charm after 10 minutes. Thanks for making the video.
Thanks curtis so glad I could help & really happy it worked for you. Thank you so much for the positive feedback & thank you for watching. Hope you are having a great day
What did you use to bridge both batteries? I tried using a battery used to jump start car and that didn't work (used copper to connect positive and negative to respective terminals)
Great one, i will try my Makita batteries with your video description and send test result to you. Thanks.
Thanks, it worked for me! The faulty battery is working again!
Informative Thanks for uploading. Cheers from smoky Australia.
Thank you smoky & thank you for watching really appreciate it 👍🏼
Great video, thanks. Thought I'd lost myself 2 of the 4 5amp batteries I had 👌👌👌👌💯💯💯💯
Yes, fixed mine with this method. Thank you.
One of the lucky ones. Glad I could help & thank you for watching I really appreciate it
Quality, and very down to earth video spot on 👍
Thanks Pete appreciate it
Well done for persistence..I was hooked
Thank you Craig appreciate it
So useful, Thank you!
Thank you so glad I could help & thank you for watching really appreciate it, hope you’re having a great day stay safe
You have just saved me from buying 5 more batteries Thank you
Hi shane, Glad I could Help, 5 batteries that’s amazing mate 5 out of 5 you are definitely one of the luck ones. Thank you for watching really appreciate it. Hope you have a great day mate 👍🏼
Worked for me 2! Thank you fine sir
You are welcome Brian glad I could helps, you are one many lucky ones. Thank you for watching brian really appreciate it 👍🏼
I used a solar panel and 14/2 gauge Romex Home wireing harness +/- to re-charge a previously bricked Makita 18 Volt Battery. Then the Makita Charger's micro processor agreed to charge the previously Bricked18 Volt Makita Battery to fully recharge thar Bricked 18 Volt Makita Battery. Then I used the previously Bricked 18 Volt Battery and was able to recharge the Makita 18 Volt Battery again :). Thank you !
There's a safety chip inside de battery that breaks when the power goes bellow the limit, you have to dismantle the battery and bypass a safety chip by soldering a wire to fool the charger
There's a video in spanish in UA-cam that will teach you how to do it
You just type in the browser
"Como reparar una batería makita"
You might need someone to translate
But it's pretty simple you should be able to know what he is doing and how to do it even if you dont speaks spanish
Defo trying it , thanks 👍
I’m definitely trying this method tomorrow. Hope it works for me
is that battery still usable?
Definetely going this a try, have 3 "dead" batteries hoping to revive..
Loved your comments in the video, it was a pleasure watching.. Even if it doesn't work for me I had a good time watching ;) Cheers
Any updates?
@@P105Mews neh sadly not working on mine..
@@Damaniac0064 bummer. I'll give my one a try and see how I go. It's a 1.3mah pack
Thank you - I'm going to try this on mine!
Good luck 👍🏼& thank you for watching
Many thanks bro
You helped me!
Thanks
Glad I could help & thank you for watching
Your so right, I open up the battery and test every cell and see if there is a weak one and jump start the cell with another battery and I use a multimeter doing this, like the man said you can jump the battery by using another 18volt battery to give it more volts and then charge this and it works, PS buy a cheap multimeter and you can always check the battery for the volts. Good video and this video gives good explanation on how to do this thou 👍👏
so glad it worked for you cheers.
Thanks for watching frank
Worked for me thanks
Thank you brother 😊😊😊i saved mine
I will try it out and hope it will work on mine as well. Thx for your vid. 👍👍😉
Didn't work. Hmmm
Awesome!
Thanks for sharing mate, just what I needed to know and will save me a few bob too!
No I know this bit is going to sound bonkers but I've been meaning to learn how to use a multi meter for ages but never got round to it. Please could you share the make and model of the one that you used?
Thanks in advance.
All the best,
Steve.
big clive did a good video about how to use a multimeter about a month ago.
if you want to know about multi meters you have to check out this old tony
Hi!! What voltage are cables been used?
top work sir
Good job!!
Thanks for posting this video theses batteries are so expensive I brought a brand new drill with battery and battery wouldn’t charge I think it must have been sitting in a warehouse for ages thanks
Hey scooby great video. I've got a 1.3ah battery and have tried to bring it back to life as shown on your video. Voltage came up to 17.6V however it still can't charge. Is there anything else I can do or am I missing something?
Side note : the battery hasn't been used nor charged in a few years
Hi you may need a battery that’s like a dewalt battery a 32v battery to give it a really good charge so the charger recognises it a 18v to 18v would take a while to give the power to it but if you double it using another battery with higher voltage the chances of it working are around 80% as it will give it more charge quicker hope this helps 👍
Mine worked too... the dead one was at 13.5v and I've only left it for 5' until it got to 14.5v and the charger took it from there! Cheers
I’m so glad it for for you, one if the lucky ones. Thank you for watching I really appreciate it.
Works perfect. Just connected the dead battery for 3 min and started to change again
i'm so glad it work for you andriy you are one of the lucky ones. thank you watching really appreciate it.
@@ScoobyRolla
Thank you again
Nice one mate
How many year/month did the recover faulty battery work well again?
Great video man. You just saved me $80 bucks. Much appreciated.
Glad to help mark really happy it worked for you. One of the lucky ones 👍🏼. Hope you have a great day
Thank you
Hi how to order the makita battery and charger of 14.4 volt
This does work as I did it last week however I have to go through the same rigmarole every time I want to charge it so not much help in the scheme of things.
Could you tell me where you got rhe wires I need to copy your solution
Hi, you Can use any old cables from a old appliance wire. Just cut a length of it, then strip the collar off, then there will be three wire which you can use 2 of them. Hope this helps. Sorry about the delay in responding
Should use a current limiting device like a 12v 25watt light bulb before one or both batteries burn
thank you!!!!
You have to leave the batteries longer Evan though you hear the buzzing it will adjust after 15 minutes.
Thank you :-)
I got mad at my 18 volt 6amp hour because it wouldn't take a charge. I slammed it twice on the concrete floor of my shop. Did not throw it down but wacked it really hard with it still in my hand, bottom of battery pack to the floor . Wack wack! Works just fine now. Been using it for at least 10 months now. Don't know what I did but it worked.
They do say if something doesn’t work give a wack a couple of times it might do the job 😂
You did well resetting it the thing you did wrong is keep putting it on and off you really needed another battery that had double the voltage in that battery to give it a good charge but glad it charged it enough to work 👍
What if I use a battery (used to jump start car) and connect it to copper that makes contact with positive and negative, will it technically be doing the same thing?
Should work. I shoved a couple of pennies in the tool connection slots in the battery, and hooked it to an automotive battery charger's clamps (12V). Doesn't have the safeties of a real lithium ion charger though, so don't leave home with it plugged in, and set it in relatively fire safe area. And don't mix up the polarity!
What gauge/diameter wire did you use? When I insert the lugs into the positive and negative terminals to both batteries, mine sparked a loud crack and bright green flame and burnt the entire length of cables.
Where is the link for that clip wire thing you using?
A bit long winded, but with fast forward an informative video. Useful.
thank you Paul appreciate it. I know it was a bit long winded but wanted to show everything. Thank you for watching hope you have a great day
good video, help save the waste. most chargers won't start if the voltage is too low, just make sure you keep them in sight when using jumpers as a really failed battery may short and can cause a fire.
Good point Jerry, thank you for sharing & thank you for watching to hope you are having a great day
Any update on how the faulty battery is now?.
How long in totale did you leave it on charge ?
Danoh Danoh I’m not sure you know. Enough so that it could charge up by itself.
Where can I find that wire you used to connect the batteries up?
You can make it yourself with any 12-15 gauge wire and male electrical connector ends. Very easy and surely found at harbor freight or walmart
Where do you get those type of cables?? I have two batteries doing the same thing, and I definitely will try to do this!!
Hi, you Can use any old cables from a old appliance wire. Just cut a length of it, then strip the collar off, then there will be three wire which you can use 2 of them. Hope this helps.
Use 14 gauge automotive wire, color coded black/red with the right size alligator clips. Less mistakes that way and the wire is more flexible, too. Black is always negative, or ground.
The Decent Battery... A good band name?
Sounds good. I'm gonna try it out. I hooked it up already. I'm starting with a fully charged 5.0ah good battery and I'm trying to revive a bricked 3.0ah. If it works, I have 3 bad batteries to try out. I'm just going to wait 10 minutes at a time and recharge the 5.0 every 10 minutes as well. Wish me luck.
Good luck patrick
Do tell?
Did work?
I know this is a old video but for those that have this issue, what happens is if the battery voltage gets too low there's a chip inside the battery (think of it as a fuse) that locks the battery and prevents it from being charged ever again. Battery voltage drops in batteries slowly when not in use and if you don't periodically charge these batteries and voltage drops too low the chip locks the battery.
I would be curious if in this guys video if he used the battery that wouldn't charge and IF it charged as normal after doing what he did or IF the battery failed to charge again.
Hi Harry the battery was fine after that with no issues. But you are right there is a circuit board within the battery which monitor all the batteries in side. So if the batteries are leaking acid then it won’t let the charger recharge the batteries & the same again if the voltage is to low then it thinks there is problem with the batteries & again won’t charge it. That’s why if you are lucky & your batteries aren’t leaking acid & it’s low on voltage then usually this method will works. Hope this helps & thank you for sharing Harry
Does that mean that it's not possible anymore to charge the dead battery or is there a solution?
Those chips on batteries are for overcharge and over discharge protection. Makita has its own battery circuitry built on BMS on charger, which includes faulty battery detection. And Makita XT battery pack itself has circuitry to prevent over discharge upon which the battery would stop working until recharged. So Makita chargers would deem any battery with lower than rated voltage as faulty. But what happens is sometimes batteries would gradually discharge even when it isn't in use. Over heating the tool due over loading could lead to sudden over discharge, which could cause Makita to detect as defective.
When you do this always start with a fully charged battery. If you don't you risk damaging your good battery by dropping the voltage too low.
Don't measure the batteries while the are connected together as you are only measuring the voltage drop across the wires which is created by the resistance in the wire.
Thanks for that 👍🏼
:)
No. He is measuring battery voltage.
There is very little voltage drop across a single jumper wire since the wire has close to zero ohms resistance. He is measuring the voltage between wire 1 and wire 2 which are connected to positive and negative terminals. For example, if he performed a resistance test on each wire when disconnected from the terminals it would show less than 1 ohm or close to zero resistance (unless it was broken), therefore no voltage drop occurs over the wire.
@@robertmorin6495 If you wanna get really technical, read Kirchhoff's voltage law. He is measuring the voltage of both batteries, the bad battery reads slightly lower due to losses though the connections because they aren't good enough to allow the full flow of current between the batteries. When you jump-start a car with cables sometimes not enough power gets through due to the weak connections to turn over the engine fast enough to start even though the donor car is fully charged and running. If you removed the cells inside the bad battery it would read almost the same as the good battery from the outside terminals while it it is connected to the good one.
Thats a good hack if the charge controller or fuse hasn't gone. But you shouldn't charge the battery that fast as it could damage it. You should use a power supply where the current can not get too large to damage the battery or a power supply that has variable current control to limit the current. This is especially important when the battery is dead. If the cells total less than 2.5V per cell you probably don't want to bother reviving (if li-ion) You can sometimes find completely dead cells in the pack and you need to swap these dead ones out to fix the battery.
Thanks for sharing izzzzz
How long did that battery keep working?
Hi Wilmer, it’s working no issues so far
@Scooby Rolla. Hi, my battery only charges for about 1 minute then it stops charging... Have you heard that before? Great video btw....
Can i use a good Ni Cd battery to revive a dead Lithium one? They both have the same voltage
I jump charged mine and it went up to 16.8v untill one section was really hot so i actually had 2 bad cells. Mine is a Bl1830
Just be careful if they get to hot they can blow up.
I have the opposite issue with my Makita battery. It's an 18 volt battery but the charger put 20 volts in it and now it won't run the tools. I'm trying to discharge it now to see if it will eventually work.
A full 18 volt battery is up to 21v. 5 batteries x 3.6 nominal = 18v, 5 batteries at 4.2v peak = 21v. So 20v is ok.
Sadly, it won't always work this way. I have gotten 3 dead Makita batteries from a friend - after I told him I fixed one by replacing the dead cells - none of them will charge on the Makita fast charger DC18RC. 1 has a problem with it's temp sensor. The other 2 have a fault in their control board. As of writing this I have 2 Makita batteries connected + to + and - to -, the same as you :P
i have a dewalt gharger and batt. plug it in and nothing my charger has a light on to let you no but thats not working either?
Hi Jerry try another battery on the charger to make sure it is working if it is then it could be that cells in battery are damaged & leaking on the battery what won’t charge. Hope this helps sorry about the delay in responding
Got my Makita battery up to 19v but it still makes the same noise on the charger and even though it's fully charged when I put it on a drill it only makes the light come on. Any ideas? 🤔
The worse thing is about the makita battery are that they have a circuit board inside the battery (1). Some times if the battery goes below a certain charge the board refuses to charge the battery. (2). & some times the battery cells leak acid on to them & damaged them so they refuse to charge up. I’m really sorry but it sounds like the board in the battery is damaged. I’m sorry I could help. Thanks for watching I really appreciate it.
It might be worth opening it up to see what’s happened to it or you could sell it on eBay as some people buy them & open them up & repair
& sell them on. Hope this helps, might be better off selling it & putting some money on top & buying another.
Scooby Rolla Thanks for the reply. I see on other sites they say that if you put the battery on the charger and it fails to except it three times a chip or fuse on the circuit board blows or blocks it from charging again even if the batteries inside are ok. I have no fun to change the circuit board so will sell it on as the individual batteries inside must be ok. I only paid 10€ including postage so haven't lost anything.
dang, wish i brought home a good battery from work, got my dud here and thought it was a goner, going to try this when i get ahold of one of my good batts
Hi, Worth trying definitely you might be lucky like many others. All depends if the battery has leaked acid or if circuit board is burnt out then it won’t work. Good luck & thanks for watching really appreciate it
Just curious as to how you established the battery was faulty in the first place? What lights were activated on the charger to give you this information? Thanks.
Hi, at the beginning of the video I put the faulty battery on the charger and it starts beeping and flashing red and green and on the charger it shows a diagram and faults and shows red and green lights flashing and beeping showing a broken battery sign at the end of it. check the beginning of the video. Hope this helps
Literally watch the video
What a thicko.... did you watch the full video...it wont charge 🤣
Once a cell goes below around 2.0 volts the electrodes become plated with lithium and begin to break down. That battery has 2 parallel sets of 5 cells in series which means damage starts at 10 volts, so don't expect the bad one to perform as good as it did before. Plus that heat is from too much current flowing between the batteries.
Thank you for sharing that good to know.
Sorry just seeing this video now. I have 2 batteries that take charge but it doesn't hold for long. Can they be revived? Thanks great upload.
Hi, James if they are charging but not holding charge for long time that means that battery cells leaking inside the battery casing or cells within battery are dying. Hope this helps
Best to sell them for cheap on eBay & replace them with new one because eventually they will not hold charge at all. Hope this helps
@@ScoobyRolla yeah thanks for getting back to me I'll buy the adapter and a couple of lithium's I think haha. 👍🏻
And if you don't have a good charged battery what you do?
Charge the good one. Daw
unstead of taking the chance with a good battery i will try another drill type 18 volt charger
This is happening to two of my batteries with all good cells. Even at 18.5v they refuse to be accepted by the charger.
My 3 amp battery has no problem even when I drain dead.
if you leave it on the charger, there is a fan which blows cool air around the battery if you leave it to charge it will cool it down. a lot of these batteries over heat and that fucks them up. inside the charger it has some fancy electronics in side wich monitors each cell, when they go faulty its possibly one of the cells that not up to scratch, it stops the charging due to a voltage/current imballance.
Thanks for sharing Brian 👍🏼
Makita batteries are the reason I own all dewalt stuff now.
Thanks for sharing Justin & thanks for watching
Yeah old makita batteries are bad, but so far my are still holding up, but the newer makita are a huge improvement. And the three year warranty got two of my batteries replaced, no questions asked( I dropped them from a fully extended scissor lift 😅)
Dewalt tools are the reason I put up with makita battery’s
@@Marky948 I had so many makita lithium batteries go completely defective and wouldn’t charge. Never a problem with dewalt
Makitas are just dewalt in blue skin, look it up
Does it still work
I find it interesting that your charger sounds like it has a fan running but mine is silent. Yours also played a little tune at one point. I've never seen one that does that.
Yours will play a tune too.. what you have to do is slide the battery in and out again twice quickly. It will then play a tune when full charged 👌
Hi, yes it has a built in fan to cool the battery down if it hot from using it while you are charging it & yes if you take battery in & out of the charger it will different music. I’ve done a video on this. Hope this helps & thank you for watching I really appreciate it.
Thank you for sharing & thank you for watching
Makita fast chargers have fans.
That’s right thank you for sharing
I just connected mine to a car battery charger for 10 mins worked a treat.
I don't have the money to go out and buy two batteries. It'll run for about 2 minutes if that and shut right off. I got a six-speed blower but they say Makita will work in that you're going to interchangeable but I haven't seen one yet. If any questions give me a call. I love Makita😮
...how is the "old" battery doing? ...did it still function after the "jump start" as per normal?
when you drained a good battery you should charge it up and then give the bad one a charge from the fully charged good one
Thanks for sharing
i have 6 broken makita batteries,,,, hope this works for me
Good luck John
jeg købte en lader Makita fra wish den virkede ikke har ikke fået den byttet kan den laves
how long did it last ?
Hi, Still working
Helped me and many thanks, People should post their own video if they think they can do so much better. So many whingers in this world.....
I agree mark. So glad it for worked for you Mark. Really appreciate you watching to 👍🏼
I just replaced the bad cell in my battery and it has over 20 volts again but the stupid charger wont accept it just like before because of that stupid chip
Well done replacing the bad cell. Yes thats the problems with the circuit board. You can replace the board
I just connected it to a 12v lead acid car battery that has 13v and no electronics to fry. It charged to 13v and then the rest on the Makita charger.
I tried this today the same as you. 14.4 v. I charged it slowly and got back up to 14.4 . Put it on the charger , did not work, tried it in the drill, did not work. My best guess is ,,,,,, The chip board , somehow the low voltage is recorded on the chipboard and it will register it dead even if you measure a good voltage. It's how they keep selling batteries . In another video I saw they changed the chipboard to get over the problem which I am now ordering from China at 4.50€.
Hi, If the circuit board is blown it will stops the battery charging up but if you’ve charged the battery & it’s not working in the drill it could be damaged batteries cells. Tell us know how you get on & good luck.
@@ScoobyRolla yep, 4 cells where down, either 0 reading or less than 1 volt .
Do you have a link for the chipboard please x
Just send me again half point and I'm still having trouble. Can you please give me a hand pretty please pretty please to try to get this tool to work from. I don't know if to go out by Makita batteries or use the two batteries that I have try to do something with. I just don't know no more😊
I wonder if anyone has experience using a CTEK or similar car battery charger for this kind of charging method?
Battery blokes reckon it won’t work even it says lithium