Це відео не доступне.
Перепрошуємо.
2023 Honda XR150L Additional 2,500 Mile Service Items and Valve Adjustment How To Tips
Вставка
- Опубліковано 18 сер 2024
- Use in Conjunction with our 600 mile service video for info on how to do everything. Hope this helps and ride safe!
Excellent maintenance guide !! It’s always good to see someone else do it first for reference. Appreciate it
Thanks, That’s why we did it. Hope it helped a little.
@@MishMashMotofor sure did !
Greetings from Central Mississippi. I just want to say, I appreciate these maintenance videos. There isn't a lot out there for the Xr150l. If y'all have to do any repairs, I hope to see a video on that as well.
So far so good with our 2 bikes. No repairs needed except for the 1 fuse problem. We plan to do a big bore kit upgrade at some point fairly soon.
Definitely need a video on that! I just ordered one for later install. I feel like I might have to change carbs when I do.
@edgarbradford If your running the stock/factory carb. Yes, for sure!
Great video. Very clear and easy to follow. Thanks for the efforts to tech us how to maintain our bikes
Your welcome, we like to help out where we can. I remember how it was learning to work on bikes as a kid and figure this will be lots of people’s first bike.
Y'all really do a good video very informative, constant action.
Thank you
Excellent video..ive got 2100 miles..valve service next..
Thank you for making this, new xr150l owner and this helps a lot
Your welcome
MAN! ENABLE TIPS! I OWE YOU ONE, REALLY GOOD VIDEO
Glad we could help you out. 👍🏼
Good video, liked & saved
Thank you for doing what you do. I have an XR150L as well. An older model though but pretty the same banana. I love the idea that both of you are into motorcycles.
I have a 75 XL100 also 😊
Head light adjustment is under the headlight Unit
@@charliesmith5181 Great information 👍🏼👍🏼
Thank you Sir.
Your very welcome!
Extremely well done. You guys are great together.
Thank you! 🙏
Excellent Video !
Thank you!
Great idea! Now you tell me. I did the 600 mile valve check yesterday and spent more time with the seat and plastic side pieces than the valve check. Thanks.
Glad to help.
Excellent job thx..ready to do my valves..
Very good instructional video thank you guys I hope to pick one up soon
You probably figured it out by now, but there's a nut on the back side under the cowl to adjust the headlight
Thanks for that, I need to find it and make a short video on how to adjust it.
@@MishMashMoto yeah, I don't know about yours, but mine came with the headlight aimed super high
@@smoothboye4203 Mine was good until I attempted the big hill climb that didn't go so well. The bike landed upside down and bent the headlight frame ever so slightly.
I want to see your stickers do you have a video on them ?
We don’t have a video on our stickers yet. We will try to do that for you sometime.
Nice video. Do you know any after market fuel tank will fit XR 150 L. I am thinking if their is a way to double the fuel capacity will be great.
I do not for sure but maybe a CRF230L or CRF-150F tank if someone makes a larger tank for those. Might work 🤷🏼♂️
Thanks very much, did you find that there was a range from the dealer for the valve clearance? I thought it was .003 and .005 +/- .001?. Reason I ask is that I just did my 600mi check and have a valve tapping sound. Intake was great, right at .003 and wouldn't fit .004. Exhaust side felt good with a .005 and would fit a .006 but felt snug. You think I should go ahead and tighten that exhaust down till it won't fit a .006? Thank's, sorry for the long comment.
Any mechanical tappet type engine will always make a little tappet noise. I try to set mine exactly at .003” and .005” respectively. My Honda dealer didn’t give me the tolerance and I didn’t ask for it because I am pretty anal about getting it exactly right. Your exhaust is really set at .006” and while that’s right at the largest spec limit it’s not going to hurt or damage anything it will make slightly more tapping noise. Just run it like it is until your ready to go back in and get it back closer to the recommended specs. When mine start making noises again is when I go back in and adjust them.
Before doing the valve adjustment did you notice any extra “Ticking” noise during warm idle? Also and changes to idle noise after adjusting?
Yeah, I have a good ear for “tappet ticking”. It was making a little noise. Probably about .003” slack on the intake side. Nice and quiet after adjusting.
Thanks for the reply! Seriously great camera work and clear instructions from you guys. I’ll tackle the valve adjustment soon.
I hope this is not repetition.
The manual indicates valve check every 4k km I am wondering if people are seeing wear trends now that these bikes have been here awhile??
We have about 6,500 miles on both of our bikes now and not seen any signs of internal engine issues. Valve clearances have been consistent so no signs of wear. We run our bikes pretty hard at an average of 6,800RPM for many hours a day sometimes. Quality seams to be very good on this engine so far.
@@MishMashMoto Awesome! Thanks Again
What octane do you use for gas?
87