200 series (lc200) Toyota Landcruiser Redarc dual battery Kit installation

Full installation of the Redarc BCDC dual battery charger kit into the 200 series lc200 Toyota LandCriuser. This video is part of our Digital instruction to aid with the instal of the kit which can be found on our website by clicking the link below.
www.aussiedrif...

[@paulwesson961]

Congratulations, very clear well explained video instructs and excellent products.

[@AussieDrifterTouring]

Thanks mate. Appreciate the feedback 👍

[@exploresomemore6871]

Great video and product, well explained a really simple and easy to do job👍

[@AussieDrifterTouring]

Glad it was helpful mate 👍

[@FWThriving]

Nice 👍 went for the same in my 200 series 😀

[@travellingwithmm]

Gidday, great video! keep up the great information. do you have video of how you did the wiring harness? do join all the neutrals together to go to both batteries? thanks. cheers Mark.

[@AussieDrifterTouring]

sorry mate no we don't we sell the kit as a whole package though. Here is a link to it www.aussiedriftertouring.com.au/shop/toyota-landcruiser-200-series-dual-battery-charger-install-kit

[@petertronc229]

Hi
The large plastic shroud and clips you first took off in this video , do you know where to buy replacement clips from, I've lost a few
appreciate your reply

[@AussieDrifterTouring]

Hi peter
We don’t have a supplier for the, mate but they are readily available online. Here is a link to some on eBay if that helps www.ebay.com.au/itm/20pcs-Fit-Toyota-LandCruiser-200-Engine-Cover-Clip-Radiator-Support-9046707217-/154001026602?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=705-154756-20017-0

[@philipmcelligott1572]

I have been told the blue wire has to be joined to a ignition wire , if so where ? .

[@AussieDrifterTouring]

Hi Philip. Only on vehicles with a variable voltage (smart alternator). The landcruiser has what’s called a temperature compensating alternator and therefore the blue wire doesn’t have to be connected to ignition mate.

[@nunoramos5389]

Hi there mate. Any chance of getting a video showing how to wire the BCDC1225D to be able to jump start the vehicle from the aux battery. That would be awesome!

[@AussieDrifterTouring]

Nuno Ramos hey mate. The bcdc is not able to be setup as a jump start link. You have to use an Sbi12 redarc solonoid or something similar to operates overtop of the bcdc for jump start.

[@nunoramos5389]

@@AussieDrifterTouring Sure mate. I have an old Voltech 100A isolator that I believe is capable of doing the job, but not 100% sure on how to wire it.

[@russellleigh6473]

Hey mate is there a video to show how to change the profile on your kit?

[@AussieDrifterTouring]

Hi russell. Here I link to the video that explains it ua-cam.com/video/0if5V8DWtEM/v-deo.html let me know if you still need any help with it. Cheers kurt

[@russellleigh6473]

@@AussieDrifterTouring hey mate I bought a kit of you a couple of years ago that was for the 200 series, as the DCS lithium batters are rated for under bonnet use would the two wires on my kit be able to easily connected to change it to lithium?

[@AussieDrifterTouring]

@@russellleigh6473 hi russell, yer it can be changed easy the green and orange wire just have to be connected together. We can talk you though it if you want to give us a call. The wires will be located in the harness about 300mm from the charger.

[@russellleigh6473]

@@AussieDrifterTouring thanks mate👍

[@maginoooverland9895]

Will this kit work for LC 290 series here in the US? Thanks.

[@AussieDrifterTouring]

hey mate i cant be 100% sure of models in the us but it would be best to check the redarc instructions for the bracket and make sure nothing is mounted on that location. here is a link to them www.redarc.com.au/Content/Images/uploaded/BCDCMB-001%20Installation%20Manual.pdf