The Game Wardens used to have a 115/90 jet on I believe a tunnel hull back about 15 years ago. Not sure if it's still in service. We saw them many times floating from PK to Rochell's canoe rental.
Will you do a trip below the possum kingdom dam there’s a boat ramp at the highway 16 bridge going down stream or start from I-20 in Santo and run up stream? Very interested in those waters and love watching your videos
I have ran from Rochelle all the way to the dam. Also have rode from the county road that fords the river up to mineral wells. And on this trip ran from lake granbury up past I20. From granbury to PK is a great stretch of river and not a very easy of water is low. If you can get 200 300 CFS it be the best.
Why do people act like the 4 stroke is better, lighter, simpler and more powerful that the 2 strokes ? Simply not true. 2 stroke far simpler, lighter, more power, more torque. People buy the industry propoganda and buy more complex, heavier engines that will need more expensive service, more parts. Anyway, love the channel Sir . I had a 15.5 mod V Jon with a 40/30 Johnson Jet back in the mid 90's , great times on the Susquehanna....prices sure have gone up !!!
4 strokes definitely are not lighter. I do find them simple, but not two stroke simple. Just from a seat of the pants I think the 4 stroke has more bottom low end power on these jets. As where the two stroke need to be turning to build it's power. All that said I like the 4 stroke for the fuel consumption. On a comparable boat with comparable HP I believe I could go twice as far. One other thing is the 2 strokes are getting old and that does matter on reliability unless you just redo everything. Also I am not a fan of Mercury punch blocks when they need a rebuild.
Thanks. I have never done a video because of possible leading someone in the wrong direction. I just keep the leading edge clean and eyeball the clearance. I have gotten it too tight and lock the motor down.
@@DennisBohannan can you elaborate on what your calling the leading edge? Like if I’m looking at the impeller while it’s installed would it be the edge closest to me or the topside edge, if your not comfortable handling out more info on the topic that’s fine, much appreciated!
@@bullfrogoutdoors2666 the bottom side of impeller that you see when you look up into intake. I just file off the dings. Being impeller is turning 5000 it is best to not take off same on each blade to keep it in balance.
Hey there, I’m from the Netherlands, I’m amazed by these video’s, way to much fun! We dont have many of these boats, nor locations like these, here but I’m having a look for a boat like this. What is your opinion on running a jet outboard on a tunnel hull instead of a flat bottom? What is the difference? All best.
@@DennisBohannan When Covid hit and the number of recreational activities that were available decreased, those remaining saw a surge in interest. Just like the Outboard shortage and Boat shortage, high demand is the reason for our backlog.
How much did the boat cost. I’ve been looking for a good flat bottom jet but can’t find any near my part of texas. Wouldn’t mind traveling for one of those
@@DennisBohannan thank you. I’m going to look into them. Also. Do you prefer tiller or stick steer. I seen your videos of both I’ve never owned a stick steer. Is there a benefit to either one
Love It! I always talk about having a front witch, even a removable hitch mounted for front or rear just for those special occasions😉💪🏻
The Game Wardens used to have a 115/90 jet on I believe a tunnel hull back about 15 years ago. Not sure if it's still in service. We saw them many times floating from PK to Rochell's canoe rental.
Damn that sand is gnarly, love the painted boat! I’m gonna do mine some dark gray shades like that this summer and take out the bench seats
instablaster...
Will you do a trip below the possum kingdom dam there’s a boat ramp at the highway 16 bridge going down stream or start from I-20 in Santo and run up stream? Very interested in those waters and love watching your videos
I have ran from Rochelle all the way to the dam. Also have rode from the county road that fords the river up to mineral wells. And on this trip ran from lake granbury up past I20. From granbury to PK is a great stretch of river and not a very easy of water is low. If you can get 200 300 CFS it be the best.
Why do people act like the 4 stroke is better, lighter, simpler and more powerful that the 2 strokes ? Simply not true. 2 stroke far simpler, lighter, more power, more torque. People buy the industry propoganda and buy more complex, heavier engines that will need more expensive service, more parts. Anyway, love the channel Sir . I had a 15.5 mod V Jon with a 40/30 Johnson Jet back in the mid 90's , great times on the Susquehanna....prices sure have gone up !!!
4 strokes definitely are not lighter. I do find them simple, but not two stroke simple. Just from a seat of the pants I think the 4 stroke has more bottom low end power on these jets. As where the two stroke need to be turning to build it's power. All that said I like the 4 stroke for the fuel consumption. On a comparable boat with comparable HP I believe I could go twice as far. One other thing is the 2 strokes are getting old and that does matter on reliability unless you just redo everything. Also I am not a fan of Mercury punch blocks when they need a rebuild.
Would you be willing to do a video on sharpening impellers and maybe touch on shimming? Great content btw, always good to watch a Dennis jet video!
Thanks. I have never done a video because of possible leading someone in the wrong direction. I just keep the leading edge clean and eyeball the clearance. I have gotten it too tight and lock the motor down.
@@DennisBohannan okay thank you. I’ll have to give it a shot
@@DennisBohannan can you elaborate on what your calling the leading edge? Like if I’m looking at the impeller while it’s installed would it be the edge closest to me or the topside edge, if your not comfortable handling out more info on the topic that’s fine, much appreciated!
@@bullfrogoutdoors2666 the bottom side of impeller that you see when you look up into intake. I just file off the dings. Being impeller is turning 5000 it is best to not take off same on each blade to keep it in balance.
@@DennisBohannan thank you👍
I learned... by watching an episode of "Lone Star Law" that it's now illegal in Texas to drive or park on the river bed.... sucks.
Yeah thats dumb. Still gonna do it. Catch me if you can.
Hey there, I’m from the Netherlands, I’m amazed by these video’s, way to much fun! We dont have many of these boats, nor locations like these, here but I’m having a look for a boat like this. What is your opinion on running a jet outboard on a tunnel hull instead of a flat bottom? What is the difference? All best.
A mod v tunnel hull runs almost as shallow as a flat and offers much better handling
Is the lack of pumps due to covid-19 restrictions in CA. or just the demand gone up. Possible combinations. Weird times.
@@DennisBohannan When Covid hit and the number of recreational activities that were available decreased, those remaining saw a surge in interest. Just like the Outboard shortage and Boat shortage, high demand is the reason for our backlog.
That is a fine looking boat. What kind is it?
I'm looking into buy a 1448 jon boat with a 25 hp jet
Yea boy cowboy 🤙🏻🤙🏻🤙🏻
How much did the boat cost. I’ve been looking for a good flat bottom jet but can’t find any near my part of texas. Wouldn’t mind traveling for one of those
My Kaz Kustom was built in Bridgeport TX. Motor you just have to hunt down. Bare hull is 7500
@@DennisBohannan thank you. I’m going to look into them. Also. Do you prefer tiller or stick steer. I seen your videos of both I’ve never owned a stick steer. Is there a benefit to either one
Where do you usually launch at? I’m in the Brenham - Houston area and I’m looking for somewhere to launch on there
I have never ran that far south on the Brazos.
What's size is your transom on your new boat? The new 60/40 Mercury jet I ordered is a short shaft, do I need a 15in transom or a 20in transom?
23 inches
21 - 24 will work
About how much does a set up like this cost? Ballpark price
15k. Price can vary
@@DennisBohannan no here in the east. That setup is 20K or more , if you're lucky . If it were 15k i'd have one again
You may be right here as well. The outboard prices have increase if you can even get one.
👎клоуны
English?
@@DennisBohannan i think he just called you "Clown"