Très bonne année 2025 à vous Mr Gary Ferraro et un grand Merci pour cette vidéo. C'est toujours aussi précis et didactique. On comprend tout sur les transmissions après vous avoir suivi dans toutes vos restaurations. Vous m'avez bien aider à comprendre les problèmes sur 5-45rfe et sur ZF5HP19. 🙏🙂
Need one of those impact screwdrivers. Hit it with a hammer and it twists at the same time. Get one from harbor freight to try it out for those torx on that pump.
Never good when you have a shop car/truck down for repair. Takes time away from the pay jobs. How does the unit work after the overhaul? Delightful I’m sure. Great video like always. Happy new year.
Gary, do you organize bolts wth certain components or just keep it all in your mind? You toss em into a tray so fast. Maybe you have it all memorized or "close enough". Impressive work always, big fan.
Great video Gary! What would cause an 1999 Toyota Tacoma with the Aisin A43D to occasionally pull away in 2nd instead of first? Manually pulling the shifter down into 1 will cause it to downshift for the pull away. Only does it on occasion. Fluid is fresh and clean.
@ no codes present, all monitors set and passed. I believe this particular unit is all hydraulic other than output speed sensor for vehicle speed, neutral safety switch, and electric connection for overdrive.
Hi,Gary.Someday i wanna know your shop car.Where are you located? Sometimes i wonder what if i don't like it of the New York's weather? I'm from San Diego,California.
Très bonne année 2025 à vous Mr Gary Ferraro et un grand Merci pour cette vidéo. C'est toujours aussi précis et didactique. On comprend tout sur les transmissions après vous avoir suivi dans toutes vos restaurations. Vous m'avez bien aider à comprendre les problèmes sur 5-45rfe et sur ZF5HP19. 🙏🙂
Need one of those impact screwdrivers. Hit it with a hammer and it twists at the same time. Get one from harbor freight to try it out for those torx on that pump.
Good morning and good information
I lost reverse on my A4LD one time. Ended up being the overdrive piston seal was torn. On that year the overdrive clutch was applied in reverse.
Never good when you have a shop car/truck down for repair. Takes time away from the pay jobs. How does the unit work after the overhaul? Delightful I’m sure. Great video like always. Happy new year.
Yes, works well, its back on the road
Gracias gary
Welcome
Gary, do you organize bolts wth certain components or just keep it all in your mind? You toss em into a tray so fast. Maybe you have it all memorized or "close enough". Impressive work always, big fan.
Yes, i know where everything goes
Great video Gary! What would cause an 1999 Toyota Tacoma with the Aisin A43D to occasionally pull away in 2nd instead of first? Manually pulling the shifter down into 1 will cause it to downshift for the pull away. Only does it on occasion. Fluid is fresh and clean.
was this scanned for codes?
@ no codes present, all monitors set and passed. I believe this particular unit is all hydraulic other than output speed sensor for vehicle speed, neutral safety switch, and electric connection for overdrive.
@ could be something hanging up in valve body
@@GaryFerraro thanks Gary that’s what I wondered too. Valve not returning in the valve body. I appreciate your time and videos.
Hi,Gary.Someday i wanna know your shop car.Where are you located? Sometimes i wonder what if i don't like it of the New York's weather? I'm from San Diego,California.
im on Long Island
what caused the problem with this trans?
worn out reverse band