I don't even have these issues on my switch and I don't plan on modifying or repairing my switch soon, yet I still watch your videos because they are so clean and easy to watch. Thanks for making such high quality videos.
Great channel! I am a beginner learning how to fix consoles. And someone recommended me your channel. Thanks for showing us the step by step repair process. I learned a lot.
1:48 i have it too whenever i inject a payload but could it really mean something? i modded my erista switch almost a year ago thanks to the written guides and your channel and sometimes it did show that, no problems now and after 6 whole years (soon 7 in november) of having the erista, its battery health is at 95% btw, you are soon to 100k! great content!
@@sthetixofficial i know but thanks for responding, but another thing to mention is that when i go on launch via hekate and boot into emummc, semistock or sysmmc cfw, there is that charging battery icon even if i dont have any cable connected. sometimes it shows the battery or shows atmosphère logo
@@sthetixofficial oh okay thank you. please never stop these high quailty video guides because they learn so much and i simply like watching your content
❤And again a very good detailed Video 👍👍👍👍 Can you make a video that makes the battery problem with the display (for example, that 199% is displayed). I had this on the old switch where I had 3 partitions (Linux,android) and had to reset it with an app always. That was very annoying
Hello friend, I’m a technician and I also do mods on Nintendo switch oled consoles, a strange fact happened to me, the NX v6s chip no longer turns on, the console connected to the 0.500A power supply, I have already checked the soldering points with the multimeter and they are all perfectly connected, I connected the console to the PC and it is not in RCM block, the 5V arrive regularly on the charging connector, what could it be? I would be very grateful to you! (The DAT0 is permanent)
Hey! When I do the same measurement on my switch, i get 0.85V with the black probe and 2.3V with the red probe in diode mode. So can I also conclude that my MAX77620H is faulty? Thanks in advance and thank you for your amazing work. The symptoms of my switch are that it only boots to the nintendo logo and then shuts off (only when plugged in).
@@sthetixofficial I can't, that's why I'm asking here :D originally I planed to install a picofly and try to boot into Hekate. But then I saw your videos an checked the diode values. I thought wrong diode values would always mean that there is a hardware issue, which I would like to fix before I mod my console
Hi, I have question a Nintendo switch switch came in for repair I change the usb port and P13 chip as it had shots. Now switch is fix working and charging fine. But the problem is it is not docking. I have checked LCD connector it is fine as well and there is no shot around M92 chip as well. But still not image on TV. What could the problem and advice
you need to check for the USB port and P13 again and check the connection between the power and the P13 USB . buy a USB tail tester / USB breakout board and you can see the error later.
Hey I have weird issue with my Oled after Picofly install. Power and Volume button wont work. It only works when the switch is off and I press Volume + Power button at the same time, only then the switch will boot up. Other than that the buttons dont work at all, OFW and hekate doesnt matter. What could be the issue here? I already changed the cable and tried it on another switch. Checked the connector and I dont have any shorts or different readings. Please help
@@sthetixofficial Am saying if yu can make a video from a brick oled modchip went bad when installing oled doesnt turn on. even without the modchip uninstall still foesnt turn on csn yu make s video from dat specific kind of pronlem eith sn oled.cause I hv sn oled like dat..
3 hours ago I turned off the switch after a gaming session, when I want to turn it back on I only see a black screen. I tried to perform a hard reset but it doesn't help. Do you know what could be the reason?
Hey men.cant yu make s video from a brick oled fr a modchip .brick refering to by installi g a modchip they oled doesnt tun on again dat type of video I never seen before getting fix.I hv an oled dat is brick even with the modchip uninstsll it still doesnt power on.
If the cfw boot and there are line show when it go emummc or ofw If disconect chip wier the line not show any more is it adapter or some where on chip or motherboard or what??? The console working and no things happend If no chip conect If remove dat0 line point wier no more line some console yes i see this line when boot cfw some console no 😅 this is so weird ...
I don't even have these issues on my switch and I don't plan on modifying or repairing my switch soon, yet I still watch your videos because they are so clean and easy to watch. Thanks for making such high quality videos.
thank you
@@sthetixofficial
Do you still do updating of CFW with your HATS pack?
Haven't seen anything new in a while.
@gelezinisvilkas6141 yes it is on www.sthetix.info/hats/releases/
@@HeavyShark127 Thank you
@@sthetixofficial
Sorry for the bother... but can I delete older HATS pack once new one is downloaded?
the GOAT returns with another comfy repair video
🎉🎉 congratulations 🎉🎉
You deserve better & hopefully one day you will reach 1M subscribes
Love your videos & taste in music 😍
thank you 🙏
Great channel! I am a beginner learning how to fix consoles.
And someone recommended me your channel. Thanks for showing us the step by step repair process.
I learned a lot.
Welcome aboard!
🎉🎉🎉Congratulations on reaching 100k subscribers🎉🎉🎉
thank you
1:48 i have it too whenever i inject a payload but could it really mean something? i modded my erista switch almost a year ago thanks to the written guides and your channel and sometimes it did show that, no problems now and after 6 whole years (soon 7 in november) of having the erista, its battery health is at 95%
btw, you are soon to 100k! great content!
injecting a payload will automatically turn on the console
that is normal.
@@sthetixofficial i know but thanks for responding, but another thing to mention is that when i go on launch via hekate and boot into emummc, semistock or sysmmc cfw, there is that charging battery icon even if i dont have any cable connected. sometimes it shows the battery or shows atmosphère logo
@thatyahoo9534 maybe it is just a glitch? as long as the console works fine then I think you don't need to be worry of it
@@sthetixofficial oh okay thank you. please never stop these high quailty video guides because they learn so much and i simply like watching your content
Great video! Missing blur on nin-sue-do’s logo (I know in the past you’ve blurred it)
because it is not a modding project, it should be fine 😊
Goat with another banger
Thanks 🙏
When you are applying heat to the MAX77620H chip how do you make sure you do not desolder the components around it?
well, you need to have experience and skill and of course you need to inspect the components around the chip with a microscope
Switch fell off couch now it only boots into stock no hekate and can’t read any sd card, it is an easy fix or am I cooked?
maybe the solder point on the chip is broken.
you're very awesome!
❤And again a very good detailed Video 👍👍👍👍
Can you make a video that makes the battery problem with the display (for example, that 199% is displayed). I had this on the old switch where I had 3 partitions (Linux,android) and had to reset it with an app always. That was very annoying
Maybe you need to do the battery desync fix with the tool from CtCaer github.com/CTCaer/battery_desync_fix_nx/releases
Thank you, i dont have a project or video about battery mismatched. so have you done the battery desync fix?
@@sthetixofficial Thank you ,i had this problem on my old Switch ,now i have no problems (hope it stays that way)
GOAT. Where u from bro?, what country? Just curious
I am in indonesia.. thx for watching
@@sthetixofficial awesome bro. Keep up the good work 🔥
thank you
You should make a rgh3 video on a trinity motherboard.
maybe sometime later, if possible
Can u pls make a video on installing retroarch and games (psp)
nah bro, dangerous to post that kind of video.
❤❤❤ جيد
What is the name of the program you use for detection?
xzz?
Hello friend, I’m a technician and I also do mods on Nintendo switch oled consoles, a strange fact happened to me, the NX v6s chip no longer turns on, the console connected to the 0.500A power supply, I have already checked the soldering points with the multimeter and they are all perfectly connected, I connected the console to the PC and it is not in RCM block, the 5V arrive regularly on the charging connector, what could it be? I would be very grateful to you! (The DAT0 is permanent)
Hey! When I do the same measurement on my switch, i get 0.85V with the black probe and 2.3V with the red probe in diode mode. So can I also conclude that my MAX77620H is faulty? Thanks in advance and thank you for your amazing work. The symptoms of my switch are that it only boots to the nintendo logo and then shuts off (only when plugged in).
how do you know if the max chip is faulty? how can you be sure it is not a software issue?
@@sthetixofficial I can't, that's why I'm asking here :D originally I planed to install a picofly and try to boot into Hekate. But then I saw your videos an checked the diode values. I thought wrong diode values would always mean that there is a hardware issue, which I would like to fix before I mod my console
you need to check and compare it with xzz then you will know the issue
Hi, I have question a Nintendo switch switch came in for repair I change the usb port and P13 chip as it had shots. Now switch is fix working and charging fine. But the problem is it is not docking. I have checked LCD connector it is fine as well and there is no shot around M92 chip as well. But still not image on TV. What could the problem and advice
you need to check for the USB port and P13 again and check the connection between the power and the P13 USB . buy a USB tail tester / USB breakout board and you can see the error later.
How to upgrade sd card
Hey I have weird issue with my Oled after Picofly install. Power and Volume button wont work. It only works when the switch is off and I press Volume + Power button at the same time, only then the switch will boot up. Other than that the buttons dont work at all, OFW and hekate doesnt matter. What could be the issue here? I already changed the cable and tried it on another switch. Checked the connector and I dont have any shorts or different readings. Please help
you need to discard the Pico.. Pico is known to have various issues
do yu think dat the Max ic needs replace?
yes I replaced it
@@sthetixofficial Am saying if yu can make a video from a brick oled modchip went bad when installing oled doesnt turn on. even without the modchip uninstall still foesnt turn on csn yu make s video from dat specific kind of pronlem eith sn oled.cause I hv sn oled like dat..
we need to inspect the console for issues
Você poderia me fornecer o esquema elétrico do Nintendo switch oled desde já agradeço
please see the link in the description
3 hours ago I turned off the switch after a gaming session, when I want to turn it back on I only see a black screen. I tried to perform a hard reset but it doesn't help. Do you know what could be the reason?
is your console modchipped? try to press and hold the power button for 12 secs and try pressing the power button again.
Its time for the youtube play button, we did it! 100K!
yes. waiting for the play button
Hey men.cant yu make s video from a brick oled fr a modchip .brick refering to by installi g a modchip they oled doesnt tun on again dat type of video I never seen before getting fix.I hv an oled dat is brick even with the modchip uninstsll it still doesnt power on.
we need to inspect the console
XZZ nya berguna banget 😀
yes benar
If the cfw boot and there are line show when it go emummc or ofw If disconect chip wier the line not show any more is it adapter or some where on chip or motherboard or what??? The console working and no things happend If no chip conect If remove dat0 line point wier no more line some console yes i see this line when boot cfw some console no 😅 this is so weird ...
I think it is related to the sdcard speed or brands
Bro plz made video on crlnand d9 also
later
I have the same problem exactly and i changed the chip with a new one but still i have the problem
maybe it is a different case for your console.
My computer has virus?
Give me ur Nintendo files please
i dont know what you mean.
@@sthetixofficial like the Nintendo Sd card files cuz I lost all mine and it would help if u could.
@RobloxGamer-ty8vj it is sthetix.info/hats-releases
@@sthetixofficial that’s an invalid page
sorry.
www.sthetix.info/hats/releases/