@@mikea4080 Done. I mis spoke a couple times in the video is why its private until I can fix it later this weekend. But its viewable now, thanks for watching
Exactly what i needed my truck is a 2011 4.7 ram. Driving me crazy with no start. This is my problem they wanted 800 for a new fuel pump. I thank you a million
Nothing can replace a mechanic's intuition,sadly Chrysler has never been known for reliability in the electronics division in my humble opinion, great vid Jt ! Big ups
Very good video for anyone that has one of the affected vehicles. I had to get a emergency repair fuel line kit for my ex Neon when the factory plastic line got a pinhole leak in it one day going to work. Did it on the side of the road with some wire cutters and the kit that was like 15 bucks. It got me down the road till I could find a 95 only OEM fuel line that has been discontinued. Never had to mess with the tipm or fuse/relay block it had other than to check fuses and relays when it was having very occasionall issues.
Good ol' fuse m25 lol. This is a good one to show the rookies.. they probably replaced the pump twice because they "saw" voltage on the m25 supply, but the internal relay isnt passing any current. I usually try to run a 55w light bulb off it to test. Made a video on one today lol.
I'm in the exact same position...(same truck much older model -98) just stalled on me last night after replacing distributor cap, i.a.c, ignition coil...
Only suggestion I ever get is to replace fuel pump.. what doesn't make sense to me on my truck is it'll fire up on the second crank(fuel pump primed not a complete crank on 1st crank).. then once it's warmed up no problem it'll start on first crank.. why?.. your suggestions? TIA
I'm having a similar issue with my Chevy cavalier, my question is is it possible to use a jumper wire on an external relay instead of a fuse I just need to get my car home so I can do a more in depth diagnostic
@@covidious7916 I did find that that with a more careful search that my ground wire was corroded pretty bad I replaced it and got the fuel pump to power on the car started and ran but when I came out the next day the same issue, so there could be a possible shortage somewhere also, it's nice out so I'm going to see what I can find and I will keep you posted. But be sure to check all of your fuses under the hood and inside to see if any are blown and your relays, but I will let you know if I'm successful today
So I just got done and I simply didn't have the new ground wire I installed securely bolted down but the problem was definitely my ground wire the car is now running 👍🏿💯 perfectly
Great video. Is it possible to use a fuel pump relay bypass kit on a 1995 Mercury Sable? My new fuel pump went out in 2 weeks. It was the 2nd fuel pump in 12 years. Thanks. I just subscribed to your channel
Hey bud listen, If your physical fuel pump has failed, this type relay repair will not affect this. This relay kit simply used to bypass a module (TIPM) so the needed volts would go straight to the pump and the pump would run. I think these are 2 separate problems.
I’m having the same issue. The previous owner already put in the jumper wire. When I turn the key on I can hear the fuel pump buzzing when I try to start. It sounds like it’s trying to start but it definitely sounds like I have power to the pump.
@@billmillington5254 Well if you hearing the pump run, you still need to no if its delivering pressure. If you can spray starter fluid in the trottle body and it starts, your problem def fuel related.
ua-cam.com/video/xrpp_yFr3Bo/v-deo.html - If this link dont work, just search my video "FIXED. Crank but NO START. Chrysler Jeep Dodge Ram 1500 TIPM Fuel Pump Relay. R09 P54 V62 Recall" Or you can just simply get the TIPM re[laced and be done with it.
I have a 06 dodge Ram 1500 5.7 that has this issue but we have very different fuse box’s mine doesn’t show a relay or fuse for fuel pump m25 is for pwr mirrors please help
I had a shop put in a new fuel pump And starter yesterday. Truck ran fine rest of the day. This morning it had a hard time starting just like before I put it in the shop. Any thoughts? I just spent 1368.00
@@OnlineMechanicTips I just did this same thing, replaced pump last night, truck started and ran well. now a no-start this morning. I also just subscribed.
@@OnlineMechanicTips 2012 dodge ram 1500 5.7 L. I just tried your method, and it starts and runs, but as u stated, it is a gamble each time if you turn vehicle off. I check the fuse for power each time it doesn't restart and there is no power present.
i have a 2011 ram 1500 doing the same thing. i can get it started with starter fluid and it stays running and will run fine once started. My mechanic recommends a fuel pump replacement but i have also seen this issue as well pop up searches. my question is since mine does run just wont start could it be the same thing?
@@OnlineMechanicTips there were no codes but I tried your method and it worked perfectly. I found a part online to fix it so hopefully it works. Getting to work with your wire trick now.
Hi i have a ford f150 2008...we just switched the fuel pump because a mechqnic came and was 100% sure it was that....but still it only cranks and wont start........we checked the pump relay and the ground cable doesnt light up...idk what it can be or what else we can do
Hey man very curious I know it’s 2 years later but this is very informative but im very curious if you have an answer for this but I have a ram 1500 4.7l 2012 and certain times of the year like as in example December to march sounds crazy I know i even sound crazy saying this but it does this thing where the fuel pump won’t kick on till the pickup is jumped or put on a booster but after march it works perfectly fine is this something related electrical or fuel pump issue it’s done this the last 2 years
@@OnlineMechanicTips I am but I don’t have a clue if it’s the fuel pump causing it or the tipm I have a fuel pump coming today to replace it to see if that’s the issue but if it’s not my only other idea would be the tipm
I have a 2016 ram v6 What mine does ones I put some starting fuel in it it will start and stay on What do u think that might be cuz I can hear the fuel pump come on Also I have a check engine light on for a brake switch light I replaced it still says same check engine light on all lights work all breaks and disk’s new also emergency brakes got new shoes plz someone help me I’m tired of paying this mechanics and no one knows why it’s keep doing that after we put the brake switch light on that’s when I started having the issue of the truck not starting and we had to put starting fluid to start someone please help me
We have a 2010 Dodge Ram 1500 Laramie quad cab that wont start. We put in a new battery and now the screen shows a message saying "no fuse" what does that mean?
Bad fuel pump. Nothing else. I already know Cuz it has gone silent. No more buzzing noises. Fuses and relays are good. Car won't start lack of fuel but the only code that popped up is p0340. But it's not the camshaft position sensor or the crankshaft position sensor. It has to be the fuel pump cuz the buzzing noise is gone. No matter what is done, it won't start even this method you used in the video. It's a bad fuel pump for my car.
Funny all my friends seam to think that my mechanical skills should be free. I've got really good at responding to there mechanical issues with. And how is that my problem.
@@OnlineMechanicTips I thought the truck stayed cranking? My impala stayed cranking on its own once I turned key😆😆 I had to unplug battery then tried again then I lifted garners, it came out to be a fraud wire.
The FIX Part 2 here: ua-cam.com/video/xrpp_yFr3Bo/v-deo.html
can you make part 2 public?
@@mikea4080 Hey what year is your truck? I want to make sure the video apply. Also are you subscribed to the channel?
@@OnlineMechanicTips 2012
@@mikea4080 Done. I mis spoke a couple times in the video is why its private until I can fix it later this weekend. But its viewable now, thanks for watching
@@OnlineMechanicTipshey bro what if I get no spark at all? 😢
Exactly what i needed my truck is a 2011 4.7 ram. Driving me crazy with no start. This is my problem they wanted 800 for a new fuel pump. I thank you a million
Nothing can replace a mechanic's intuition,sadly Chrysler has never been known for reliability in the electronics division in my humble opinion, great vid Jt ! Big ups
Absolutely always good to have a buddy who is a mechanic. But don't abuse that fact. The man needs to be paid for his profession. ✌
ding ding ding. bingo. Thanks for watching
Very good video for anyone that has one of the affected vehicles. I had to get a emergency repair fuel line kit for my ex Neon when the factory plastic line got a pinhole leak in it one day going to work.
Did it on the side of the road with some wire cutters and the kit that was like 15 bucks. It got me down the road till I could find a 95 only OEM fuel line that has been discontinued. Never had to mess with the tipm or fuse/relay block it had other than to check fuses and relays when it was having very occasionall issues.
Good ol' fuse m25 lol.
This is a good one to show the rookies.. they probably replaced the pump twice because they "saw" voltage on the m25 supply, but the internal relay isnt passing any current. I usually try to run a 55w light bulb off it to test. Made a video on one today lol.
Nice truck. Good video. No fuel. Good tip
Thanks 👍
You can wire the jumper from a source that only has power when the key is on. That way the fuel pump will only run when the truck is on.
Sure you can. There's multiple ways to do it. I'm just showing this way
I'm in the exact same position...(same truck much older model -98) just stalled on me last night after replacing distributor cap, i.a.c, ignition coil...
(Actually had fuel pump replaced too- )
Couldn't you use any spare wire (14g ?) For the jump?
Looking forward to part 2!!
Only suggestion I ever get is to replace fuel pump.. what doesn't make sense to me on my truck is it'll fire up on the second crank(fuel pump primed not a complete crank on 1st crank).. then once it's warmed up no problem it'll start on first crank.. why?.. your suggestions? TIA
Quick diagnosis 💪🏽
This man is an effing genius! I have another solution however. Avoid these problems and don't buy dodges. Lol.
Nice walkthrough, had the same'ish issue but not the fuel system :(
I'm having a similar issue with my Chevy cavalier, my question is is it possible to use a jumper wire on an external relay instead of a fuse I just need to get my car home so I can do a more in depth diagnostic
Hey I’m having that same problem with my cavalier did you ever find the problem?
@@covidious7916 I did find that that with a more careful search that my ground wire was corroded pretty bad I replaced it and got the fuel pump to power on the car started and ran but when I came out the next day the same issue, so there could be a possible shortage somewhere also, it's nice out so I'm going to see what I can find and I will keep you posted. But be sure to check all of your fuses under the hood and inside to see if any are blown and your relays, but I will let you know if I'm successful today
So I just got done and I simply didn't have the new ground wire I installed securely bolted down but the problem was definitely my ground wire the car is now running 👍🏿💯 perfectly
Great video. Is it possible to use a fuel pump relay bypass kit on a 1995 Mercury Sable? My new fuel pump went out in 2 weeks. It was the 2nd fuel pump in 12 years. Thanks. I just subscribed to your channel
Hey bud listen, If your physical fuel pump has failed, this type relay repair will not affect this. This relay kit simply used to bypass a module (TIPM) so the needed volts would go straight to the pump and the pump would run. I think these are 2 separate problems.
I’m having the same issue. The previous owner already put in the jumper wire. When I turn the key on I can hear the fuel pump buzzing when I try to start. It sounds like it’s trying to start but it definitely sounds like I have power to the pump.
Have yo had it scanned? Whats the codes? Also are you subscribed to the channel?
Hi, thanks for replying. I do have a scanner, but I did not put it on because there was no check engine light. Yes, I just subscribed to your channel.
@@billmillington5254 Well if you hearing the pump run, you still need to no if its delivering pressure. If you can spray starter fluid in the trottle body and it starts, your problem def fuel related.
You are my hero.
I just bought a used 2011 dodge ram 1500 SLT 5.7 liter same issue I am out of town on vacation how would I fix the permanently
ua-cam.com/video/xrpp_yFr3Bo/v-deo.html - If this link dont work, just search my video "FIXED. Crank but NO START. Chrysler Jeep Dodge Ram 1500 TIPM Fuel Pump Relay. R09 P54 V62 Recall" Or you can just simply get the TIPM re[laced and be done with it.
I have a 06 dodge Ram 1500 5.7 that has this issue but we have very different fuse box’s mine doesn’t show a relay or fuse for fuel pump m25 is for pwr mirrors please help
I had a shop put in a new fuel pump
And starter yesterday. Truck ran fine rest of the day. This morning it had a hard time starting just like before I put it in the shop. Any thoughts? I just spent 1368.00
Dang, what kind of Truck is this? Also are you subscribed to the channel?
@@OnlineMechanicTips I will subscribe but I saw the posts were older so I didn’t. It’s a 2011 ram 1500 5.7 hemi.
@@OnlineMechanicTips I just did this same thing, replaced pump last night, truck started and ran well. now a no-start this morning. I also just subscribed.
@@anthonyadamsrbl736 hey what year is your truck?
@@OnlineMechanicTips 2012 dodge ram 1500 5.7 L. I just tried your method, and it starts and runs, but as u stated, it is a gamble each time if you turn vehicle off. I check the fuse for power each time it doesn't restart and there is no power present.
i have a 2011 ram 1500 doing the same thing. i can get it started with starter fluid and it stays running and will run fine once started. My mechanic recommends a fuel pump replacement but i have also seen this issue as well pop up searches. my question is since mine does run just wont start could it be the same thing?
Hey bud, curious, whats any codes in the computer?
@@OnlineMechanicTips there were no codes but I tried your method and it worked perfectly. I found a part online to fix it so hopefully it works. Getting to work with your wire trick now.
Hi i have a ford f150 2008...we just switched the fuel pump because a mechqnic came and was 100% sure it was that....but still it only cranks and wont start........we checked the pump relay and the ground cable doesnt light up...idk what it can be or what else we can do
What about this problem in 2005 Durangos?
Having this issue right now with a dodge Ram 1500 2007 2wd. Frustrating
Hey man very curious I know it’s 2 years later but this is very informative but im very curious if you have an answer for this but I have a ram 1500 4.7l 2012 and certain times of the year like as in example December to march sounds crazy I know i even sound crazy saying this but it does this thing where the fuel pump won’t kick on till the pickup is jumped or put on a booster but after march it works perfectly fine is this something related electrical or fuel pump issue it’s done this the last 2 years
Curious if you have any codes in the TIPM? Also are you subscribed to the channel?
@@OnlineMechanicTips I am but I don’t have a clue if it’s the fuel pump causing it or the tipm I have a fuel pump coming today to replace it to see if that’s the issue but if it’s not my only other idea would be the tipm
@@OnlineMechanicTips I’m not to sure how to check if there is codes in the tipm
I have the same issue on a 2014 ram 1500. Replaced 2 fuel pumps. I don’t have a fuel pump relay fuse that I can find. Any help?
hey did you ever figure it out I am dealing with the same problem and all the videos have this old fuse box not the ones we have,
I have a 2016 ram v6
What mine does ones I put some starting fuel in it it will start and stay on
What do u think that might be cuz I can hear the fuel pump come on
Also I have a check engine light on for a brake switch light I replaced it still says same check engine light on all lights work all breaks and disk’s new also emergency brakes got new shoes plz someone help me I’m tired of paying this mechanics and no one knows why it’s keep doing that after we put the brake switch light on that’s when I started having the issue of the truck not starting and we had to put starting fluid to start someone please help me
God sent
Did you do part 2 yet
Yes Tim, the video link to part yo in the description. Please remember to thumbs up the videos and sub the channel, thanks
Having a problem like this myself changed the fuel regulator and now my truck won’t start
Fuel regulator??? What year truck is this? Also are you subscribed to the channel?
We have a 2010 Dodge Ram 1500 Laramie quad cab that wont start. We put in a new battery and now the screen shows a message saying "no fuse" what does that mean?
Hi did you ever figure it out?
My 2018 RAM 2500 has this problem…
Bad fuel pump. Nothing else. I already know Cuz it has gone silent. No more buzzing noises. Fuses and relays are good. Car won't start lack of fuel but the only code that popped up is p0340. But it's not the camshaft position sensor or the crankshaft position sensor. It has to be the fuel pump cuz the buzzing noise is gone. No matter what is done, it won't start even this method you used in the video. It's a bad fuel pump for my car.
Funny all my friends seam to think that my mechanical skills should be free.
I've got really good at responding to there mechanical issues with.
And how is that my problem.
Maybe they shouldn't be free but you should help your friends out whenever possible. One day it maybe you needing help
Grounded!! PCM!! Check wire harness to breaker box
No, this was a fuel problem
@@OnlineMechanicTips I thought the truck stayed cranking? My impala stayed cranking on its own once I turned key😆😆 I had to unplug battery then tried again then I lifted garners, it came out to be a fraud wire.
there is another option for 50 buck.
Just get to the point!!!
Hold on dawg, you can always just click to the next video O ungrateful ass mf.