@@timothydemonbreun840 Yes I think they are on back order. You can google and check with Andrenline Cycles in Kentucky they are the dealer who sales them.
i did the kit but did not cut the back out.....the cover has plenty of air flow around the bottom and most on the intercooler side.......cutting the back out will allow water in if you are pressure washing it........i also added stripps of stick on foam weather stripping on the inside cover to insulate noise....worked wonders
I paid 100 dollars for this. I installed on the S&B cover. I think Adrenaline should have spent 10 more minutes making a good template. Out of the time spent making the injection plastic and they cant make a paper template correct. The S&B feeds the filter and the Adrenaline cover feeds the clutches were the noise is. Im trying it this weekend let you guys know
Just switched from RZR to my new x3. Saw this. The noise is definetly disturbing but the bike is awesome. My only concern is i have the can am cooler/storage mounted in the back. Will that restrict air?
Yes I did but decided to go this route. Maybe down the line it will be something I do but I read some reviews and people are saying there are fitment issue with people who have a roof and rear window. I will do some more research and will see. Thanks for watching!
When drilling into panels that have limited room or the possibility off drilling to far put a black rubber fuel line hose as a stop over the drill bit.
with all the air/dust recirculation the bed gets have you noticed your filter being more dirty than usual? only thing i'm worried about thats stopping me from doing this install.
Why doesn't can am do this.. Possibly because at low climbing speeds the 2nd isnt moving very much air and they want to scoop the air in at low speeds maybe. Great install video. Think I'm going to run a duct fan into the intake of clutch housing as well just to be sure at low speed..
I wanted to do it but we are currently on a stay at home order from our governor. I will definitely do a before and after once this virus issue clears up. Thanks for watching!
@@UTVDIRT virus is cleared. I’m in Ohio too and no one here listened to the stay at home from Dewine. Where you at in Ohio? Hit it up. I just ordered one LOL.
just added this same one from adrenaline cycle 7:47 and I promise its easier to add the foam from the front inside the cab I tried the back it was a bitch so front went in in 10 secs 2021 X3 XRS RR
Good morning. Could you make and put a drawing with the measurements of the part that goes in the front in the air intake? I am from Argentina and here it is not for sale and I would like to do it for my x3. Thank you so much
UTV DIRT Ohhh, we’ve been riding all over Arizona when this started. Everybody who owns a side-by-side dirtbike or quad has been out riding around it’s unbelievable...
I guess you could make your on kit if you want to. I just used this kit because to me it's worth the money to get rid of that noise and its easy to install.
This kit does help out a lot....... some people put out videos saying it didn't help..... and i almost didn't do it......but do yourself a favor and do it.......
Did you install this kit on your unit? I haven't had a chance to test it yet because of the stay at home order but the kit had a good review from the sxsblog guys. I figured I would give it try. Thanks for your feedback.
UTV DIRT I have coated the entire back behind the seats and doors with industrial car sound dampening and have shoved a pool noodle in the hole in the back and it didn’t make a difference. I don’t think even a snorkel kit would help. The Can-Am is just a loud machine.
@@sxsmarine4075 Wow okay. I knew going in when I purchased this unit it was loud but I figured the performance and looks of the machine outweighed the noise issue. I will try and do a sound comparison video when this virus issue clears up. Thanks for watching!
@@UTVDIRT the X3 is better then everything out there in my mind. I love it and would never go back to my RZR. The RZR was much more quitter in the cab but ill deal with it.
Thanks for your feedback. I never had any issues with my belt. I strongly recommend installing a belt temperature gauge. That helps on saving belts. Thanks for watching!
Good channel. I'm a ranger man. Still watching ur old videos with all the installs. Very helpful in the buying/installation process...good looking out
Thank you! I appreciate your continued support! More vids on the way.
@@UTVDIRT Is this kit sold anymore? Link no longer works. Thanks
@@timothydemonbreun840 Yes I think they are on back order. You can google and check with Andrenline Cycles in Kentucky they are the dealer who sales them.
I got a can am xrs and I installed this filter . I do here less noise in the cabin .. I put a rear window and it help a little more on the noise .
Nice! I put the rear net in and that seemed to help too.
i did the kit but did not cut the back out.....the cover has plenty of air flow around the bottom and most on the intercooler side.......cutting the back out will allow water in if you are pressure washing it........i also added stripps of stick on foam weather stripping on the inside cover to insulate noise....worked wonders
I paid 100 dollars for this. I installed on the S&B cover. I think Adrenaline should have spent 10 more minutes making a good template. Out of the time spent making the injection plastic and they cant make a paper template correct. The S&B feeds the filter and the Adrenaline cover feeds the clutches were the noise is. Im trying it this weekend let you guys know
Thanks for the vid , probably going this route however if have storage box on back ensure doesn't block air flow
Yep just make sure it has some room to breathe. Thanks for watching!
Just switched from RZR to my new x3. Saw this. The noise is definetly disturbing but the bike is awesome. My only concern is i have the can am cooler/storage mounted in the back. Will that restrict air?
I added a storage box to mine and had no issues.
Did you look into an S&B Partical Separator before installing this?
Yes I did but decided to go this route. Maybe down the line it will be something I do but I read some reviews and people are saying there are fitment issue with people who have a roof and rear window. I will do some more research and will see. Thanks for watching!
When drilling into panels that have limited room or the possibility off drilling to far put a black rubber fuel line hose as a stop over the drill bit.
Thanks for the info!
Great video would you say it helped with the noise or not really?
Thanks! It helped a lot but doesn't take all the noise away. I think it's worth the money. Thanks for watching!
@@UTVDIRT thanks for the reply! I have also been looking at this kit
www.rockymountainatvmc.com/parts/2020-can-am-maverick-x3-max-x-rs-turbo-rr
with all the air/dust recirculation the bed gets have you noticed your filter being more dirty than usual? only thing i'm worried about thats stopping me from doing this install.
No the filter is about the same. I haven't noticed a big difference.
@@UTVDIRT cool. thanks.
Is there a kit like this for the Maverick Sport DPS? My machine is super loud and I need to get it down somehow. Great review!
I am not aware of any kits for your maverick sport. Might want to check some maverick sport forums online. Thanks for watching!
@@UTVDIRT - I did that and have gotten some great ideas! Thank you!
Nice! No problem
Why doesn't can am do this.. Possibly because at low climbing speeds the 2nd isnt moving very much air and they want to scoop the air in at low speeds maybe. Great install video. Think I'm going to run a duct fan into the intake of clutch housing as well just to be sure at low speed..
Yeah Can Am must have their reasons but I think it is definitely a poor design. Thanks for watching!
Great video and tutorial! Looking forward to adding the kit to my xrs.
Thank you! It helped out big time in noise reduction. Thanks for watching!
Would like to see and hear a before and after video.
I wanted to do it but we are currently on a stay at home order from our governor. I will definitely do a before and after once this virus issue clears up. Thanks for watching!
@@UTVDIRT virus is cleared. I’m in Ohio too and no one here listened to the stay at home from Dewine. Where you at in Ohio? Hit it up. I just ordered one LOL.
Will this work if I have a S&B particle separator?
just added this same one from adrenaline cycle 7:47 and I promise its easier to add the foam from the front inside the cab I tried the back it was a bitch so front went in in 10 secs 2021 X3 XRS RR
Thanks for the info!
The link for the Air Intake kit does not work on Amazon, could you fix or put in response please
Did you use this with a particle separator?
No I did not.
Good morning. Could you make and put a drawing with the measurements of the part that goes in the front in the air intake? I am from Argentina and here it is not for sale and I would like to do it for my x3. Thank you so much
Email me and I will see if I can help you out. My email is on my UA-cam channel page under the about tab.
@@UTVDIRT Perfect Thanks for your help
The first time drove an X3 the noise was so ear piercing I thought there was something wrong with the machine!
Yep same here. This kit should help out a lot. Cant wait to try it out! Thanks for watching!
UTV DIRT Let me know and I will tell my father he has an XRC.
Will do but will have to wait until this virus thing blows over. I live in Ohio and we have been ordered to stay home.
UTV DIRT Ohhh, we’ve been riding all over Arizona when this started. Everybody who owns a side-by-side dirtbike or quad has been out riding around it’s unbelievable...
Yeah its crazy over here. They closed the Hatfield McCoy trails the other day.
Did you notice a difference in noise??
Yes I did notice a difference in noise. I talked about it in my last video yesterday. Check it out! Thanks for watching!
So your saying i could make this kit for like $5 with Just some holes, foam and a piece of plastic..?
I guess you could make your on kit if you want to. I just used this kit because to me it's worth the money to get rid of that noise and its easy to install.
This kit does help out a lot....... some people put out videos saying it didn't help..... and i almost didn't do it......but do yourself a favor and do it.......
Thanks for sharing!
I know damn well that didn’t do shit for sound. That box is not sealed at all. Not even a need to cut the back off at all.
Did you install this kit on your unit? I haven't had a chance to test it yet because of the stay at home order but the kit had a good review from the sxsblog guys. I figured I would give it try. Thanks for your feedback.
UTV DIRT I have coated the entire back behind the seats and doors with industrial car sound dampening and have shoved a pool noodle in the hole in the back and it didn’t make a difference. I don’t think even a snorkel kit would help. The Can-Am is just a loud machine.
@@sxsmarine4075 Wow okay. I knew going in when I purchased this unit it was loud but I figured the performance and looks of the machine outweighed the noise issue. I will try and do a sound comparison video when this virus issue clears up. Thanks for watching!
@@UTVDIRT the X3 is better then everything out there in my mind. I love it and would never go back to my RZR. The RZR was much more quitter in the cab but ill deal with it.
UTV DIRT hi there! Have you tested it out yet? Does it help with the noise?
Great job! Thanks
Thanks for watching!
Looks good Mr mike .
Thanks! Easy install and cant wait to test it out. Thanks for watching!
Link to product to purchase please
I put a link in the description of the video. Check it out and thanks for watching!
The link shows the product to be out of stock
You can contact Andrenline Cycles in Kentucky. That is the dealer that makes the kit. They might be on back order.
Good video
Thank you! More vids on the way!
Will this work on a 2021?
Yes it will work.
I wouldn't recommend this mod. It changes the air flow into the clutch housing and you'll start blowing belts.
Thanks for your feedback. I never had any issues with my belt. I strongly recommend installing a belt temperature gauge. That helps on saving belts. Thanks for watching!
👍👍
Where’s you partner at? Haven’t seen him in your videos anymore.
He is still around just been busy.
Built the same kit at home depot for 20.00 dollars wasn’t paying 80.00
Yeah that noise was too much for me !!!
Yeah it was very noticeable at that 5k range. Cant wait to try it out!
The noise reduction kit is a complete waste of money ! I can barely tell a difference