Geprc Cinebot30 HD O3
Вставка
- Опубліковано 6 жов 2024
- need to try the thrust linearization settings mentioned by @NickBurnsFPV
also might install a spike absorber & power the dji o3 via bec - just to feel a bit more comfortable when crashing :D - Фільми й анімація
![☀ Новый синелог. Задает тренд или просто выбесил? 🤬 [Cinelog35 V2]](http://i.ytimg.com/vi/3LXbOmqhwsE/mqdefault.jpg)
![☀ Новый синелог. Задает тренд или просто выбесил? 🤬 [Cinelog35 V2]](/img/tr.png)
Bruhhhh you out here flying the thing like it’s a 5 inch 🤣 no wonder you’re not happy with how it flies… you are using it wrong🤦🏻♂️🤣
as i mentioned in a comment before: nothing special for a quad to fly in a straight line... wait till i or someone adjusted this thing & then check and see how it can be flown when it's dialed in 🙃(might be in spring though, as tuning in winter is annoying)
lol if you think that cinewhoops are made to fly like this, and all other flying are straight lines... bro you dont know much@@swoopyfpv
@@rafaelm3404 you don't get the point - quad is flying ok, some things can be adjusted with pid's - rating isn't just the tune (o3 sd slot not reachable, usb quite hard to reach), jello (fixed by geprc on march23 on later versions)
knowing this i'd rather go with another quad... thats why i share my thoughts.. if your quality expectations are that low & you like to pay this price for a rushed unfinished product fell free... if your expectations of a cinewhoop are just to cruise this might be a good choice, but guess what: the cinewhoops performing better in extreme situations also perform better when just used for cruising
@@rafaelm3404how to properly fly it? Im new and about to buy this
Dec/22 I got this Cinebot 30 DJI O3 Air Unit PNP model, VERY disappointed with GEPRC, they just bolted the O3 unit to the drone and never paid attention that it is IMPOSSIBLE to slide a SD card in the O3 slot or to use the O3 USB port.
I had to completely disassemble the Cinebot30 O3 and make holes in the plastic frame to be able to use it. I also have other issues, I don't think O3 is getting enough voltage as the image is very grainy. Open a ticket with GEPRC is a complete joke, I have emailed , open tickets and never heard from them. The only ones bragging about this company are the ones receiving free drones for reviews - STAY AWAY FROM GEPRC, they used to be Ok
you can plug in the sd card & access the files via the usb port.
^^strange, did you check cables? (power cables, & heat shrink over the antenna extensions) should be plenty of power, as it's wired to vbat... i don't think this is power related, even with a 4s it should not be a problem.
if they don't react you could also try dji support, as this sounds like a air unit fault...
Dude I see you in every video of this product either you are a bot or some real salty dude no one cares.
@@frankgarcia9045 not a bot Frank, just pissed with this company rape. The least I can do is warn potential victims. I know, hot pepper in others asshole is refreshment.
@@frankgarcia9045 guess you want one huh? go ahead....get it 😏😏
All you gotta do is unscrew the bottom and push it out a bit a insert SD card, it's not complicated at all.. great drone!
Beautiful drone New subscriber 🤙🏻🤙🏻😮
LEDs look sick
I respect you because Cinewhoops are soooooo hard to fly
Definitely want this rig next!!!
Nice video ❤
🙌
👏👏👍
Man, it´s a cinewhoop and not a freestyle-drone... Do you expect stable flight when you do Split-S on Cinewhoop???
bounce back is way too hard - can be minimized with adjusted pid's + like mentioned, wobbles are significant better when adding thrust linearization // there is nothing special about a quad flying clean in a straight line even with ducts these days... the quad just isn't that well tuned out of the box imo...
@@swoopyfpvwhat is bounce back mean? Sorry im new to fpv and still learning to tune my drone
@@gamesforkids143 i'm flying a few years & i'm still learning how to tune :D // you can see it on flips&rolls when the quad overshoots the direction & then adjust slightly back - so you input e.g. a 180degree roll & the quad goes to 200degree & than adjusts back to 180 - you want to have this effect as minimal as possible, so it's not really visible in the footage
Goggles 2 40,000 units back ordered you won’t see it till April
got mine from the avata combo
Pyrodrone has them in stock
Geprc has disappointed me on this one, their quads are always great. I've got this one and the baby croc 5
i've seen way worse quads... but yeah they should have adjusted some stuff
What do you recommend in this price (saving money on GoPro) with the same class camera and you'd give more than 5.5 note? Are both DJI V2 and Goggles 2 are compatible with this set?
idk - haven't checked the options - but they should be some frames for diy building, maybe the iflight drone... o3 can be used with googles 2 and v2's
Way to go geprc.... Can even access SD card slot 🤦🏻
it's a bit sad... but to their excuse: they would need to make a complete new frame... you can access i the card via usb-c if you got one in // still quite tricky & annoying to get to the usb-c, but manageable :D
At $550, it is a shame they are using an old analog frame for the O3, my was mounted worst, not even the bind button was accessible, they never tested the drone either, full of CLI bugs
All you gotta do is unscrew the bottom and push it out a bit a insert SD card, it's not complicated at all.. great drone!
@@ondrrass & than copy files via usb port (which isn't also that great placed as the use an old mold, but it's an ok option, compared to unscrewing all the time :D )
@@swoopyfpv just got mine and the USB port is not that easy accessible, but also it isnt that bad 😊 happy flying!
What i did is just bought the frame and built my own different motors different FC too.
always a good option :)
Antenna angle is too low for long range
you could print a fitting one for your needs i guess - as they already extend the antenna cables by about 5cm you might also need to get some longer extensions depending on the height of the antenna...
So at this price point would you recommend it?
if you got some time maybe wait for the second iteration - the nd filter also won't fit... seems rushed & i think geprc need to do some adjustments...
@@swoopyfpv ok thanks for the heads up!!
Nope, stay away
what is the next best option?
@@swoopyfpvstill no cinebot30 v2. Been waiting for a while now
whats the best batteries to use with it?
hard to say - for snappy flying i have 6s 850mah, for longer flights i use 1100mah
and also how to setup or arm my cinebot 30 O3 with dji fpv remote controller 2? I m using dji goggles v2
where do you connect BEC and LED to? which connector do you use? please make another video detailing on this
i bought it as rtf - led is connected to the geprc bec (+/-) the bec is set to 12v & connected to the battery pads - signal to the bec goes to a rt or tx pad not quite sure - it can be turned on/off via pinio
@@swoopyfpv did this and my led strip smoked out, bec gave a output of 11.5 around and the strip worked at 2s battery voltage that is 7.4V. I lost LED now. Any replacement led strip available for it? And also how do i use my dji FPV remote controller with cinebot 30 O3 version along with my dji goggles v2? (Gamepad type dji fpv controller ) Please respond i m stuck in this from 2 weeks. I already bind my O3 with goggles and controller and can get video transmissio from O3 in goggles but my Flight controller f722 AIO doesn't respond to the stick movements in beta flight.
@@adityak.n9475 hmm - maybe they changed the strip to another voltage?! i bought it prebuild. dji remote 2 is not compatible with the v2 goggles as far as i know (only goggles 2)
@@swoopyfpv finally I managed to control the motors via my dji fpv remote control 2 and the goggles v2 worked. All I need to do was to change the receiver protocol in the goggles from sbus fast Baud to standard.
@@adithyafpv ahh, nice. thx for keeping me updated - thought the remote 2 only works with goggles2
Only 5.5 ?
a bit over average... not more than that imo - if you work around the downsides it's quite nice
Can you change the color of the led strip?
nope - it's a single color cob strip i think
where does that one single yellow wire goes to from that flight controller ?
don't know for sure - setup is via pinio, so any rx/tx pad should work (but i don't know betaflight that well)
Does it have gps return if battery low or signal lost? (Sorry not my native language)
as long as i understand what you are asking all good - not my native language either.
no gps installed, but you could as there is an free uart - it run's betaflight, there is no low battery rth(return to home) as far as i know - only if remote signal is lost or you trigger rth via a switch
@@swoopyfpv thank you!
Bright lil ting ain’t it
not what it could be
can this cinebot 30 drone be connect with dj mavic pro 2 remote controller
nope
I do not trust GEPRC AT ALL
GEPRC IS OVER RATED
Learn to tune.
this is stock tune, came tuned by geprc like this
👍👍👍❤️❤️❤️
😊