Best Surf Fishing Rig. How to make your own Double Dropper Rigs. How To Make your Own Rig Board!

Поділитися
Вставка
  • Опубліковано 19 січ 2020
  • How to make your own Double Dropper Rigs. How To Make your Own Rig Board! BEST Surf Fishing Rigs Fishing in Jacksonville Florida. This video shows How To Make your Own Rig Board! So you can make the best Surf Fishing Rigs. Here is a proven technique to Building your own Rig Board. Here in Northeast Florida we use the Double Drop a lot. Do not pay for poorly made rigs. Make your own and have confidence that you know it will hold up when you hook into your fish of a lifetime if it is whiting, pompano, trout, redfish, or black drum. Save Money and Make your own Rigs Board today.
    To purchase rigs and Sputnik sinkers visit. www.thesinkerguy.com

КОМЕНТАРІ • 101

  • @subyawd
    @subyawd 4 роки тому +17

    Someone sponsor this legend!

  • @Floridamarty
    @Floridamarty Місяць тому

    Hello from Atlantic Beach. Thanks for the instructional. I have a double drop rig board I built 2 years ago, and it works well but yours is more compact, and it has dropper length options, so I am gonna give it try. Thank you again!

  • @JLCottingham
    @JLCottingham 4 роки тому +8

    You’re giving away your secrets! Love the passion you have for the sport. Thanks for being such a great teacher!!

  • @robertkwitchoff5824
    @robertkwitchoff5824 4 роки тому +4

    Thanks for these instructions. I’m making one this weekend. I’m also going to make a measuring board and will share with you when it’s done.

  • @pmojodomino
    @pmojodomino 4 роки тому +5

    I’ve looked at every rig board building video I can find. THIS is the best! Thank you.

    • @thesinkerguy
      @thesinkerguy  4 роки тому

      Perry Hodges thank you for the kind words! Super happy I was able to help!

  • @alsalgado2101
    @alsalgado2101 2 роки тому +1

    Just one word for this rig board.... Phenomenal!!
    Thank you...

  • @michaels7895
    @michaels7895 4 роки тому +2

    Thanks again for sharing! I look forward to building one and getting some consistency to my rig sizes.

    • @thesinkerguy
      @thesinkerguy  4 роки тому +1

      Michael S you are so very welcome!

  • @jbm135
    @jbm135 3 роки тому

    Chip, I've seen these boards demonstrated at surf seminars in the past but this is the first time with measurements. I had a math teacher maybe 60 years ago say, "if you can put numbers on it you don't understand it". It shows that you are a teacher at heart. Thanks.

  • @samuelshaver4555
    @samuelshaver4555 3 роки тому

    Made my own rig after watching your video. Works like a charm. Thanks for sharing.

  • @JoseRodriguez-mx2hw
    @JoseRodriguez-mx2hw 3 роки тому +1

    Genius! Thank you for making your jig board open source!

  • @oldfatslo
    @oldfatslo 3 роки тому +1

    Slot City linked to this video. Wow, great way to make good, consistent rigs. Thanks for posting it.

  • @FishGum
    @FishGum 4 роки тому +2

    Excellent! Simple! This will be on my table soon!

    • @thesinkerguy
      @thesinkerguy  4 роки тому

      Fish Gum I love I could help!!!!! Let me know if you have any questions!

  • @pamludlow3345
    @pamludlow3345 4 роки тому +2

    Perfect instructions took all of 30 minutes to make once I found tools in hubbys’s shed! For novice folks like me I put tape on drill bit so I knew when I was at 1/2 inch. So excited my beads and pill floats will be in a few days!! Thanks

    • @thesinkerguy
      @thesinkerguy  4 роки тому

      That is super awesome to hear! Keep me updated!

  • @mathcoachjax2560
    @mathcoachjax2560 4 роки тому

    Awesome instructional video. I ran into a fisherman on the Atlantic Beach today who turned me on to your videos. I don't have much line fishing experience as all my fishing has been spearfishing for many years. He also showed me some of the sinkers you make too. I'll be interested in getting some of them soon. Thank you for sharing.

    • @thesinkerguy
      @thesinkerguy  4 роки тому

      Then you for watching and commenting! I think you might have met Eddie! Good luck out there and subscribe fishing pole give away very soon!

  • @TheBeertruck85
    @TheBeertruck85 Рік тому

    This video should have millions of views, this is unbelievably helpful! Thank you Chip!

  • @superflycharters
    @superflycharters 4 роки тому +2

    I’ll be building this board tomorrow....thanks for sharing the info!!

    • @superflycharters
      @superflycharters 4 роки тому

      Just finished up my rig board...had all the stuff to build it right in the garage. It’s a miracle that I didn’t have to make 3 trips to the hardware store like I do with every other project I start 😂

  • @jeraldwayneakins5525
    @jeraldwayneakins5525 3 роки тому

    Excellent sir! Thanks for a no nonsense easy to follow video.

  • @thorn7925
    @thorn7925 4 роки тому +2

    I’m super excited to build this thank you.

    • @thesinkerguy
      @thesinkerguy  4 роки тому +1

      noah bargas you are very welcome and glad we could help! Subscribe up top lot of more things coming up!

  • @ericmamula1714
    @ericmamula1714 2 роки тому

    Thanks for sharing. I’m going to make one tomorrow.

  • @castncatchem3808
    @castncatchem3808 2 роки тому +1

    Ok just found the video of you making the rig. Thanks!!!

  • @coast2coastauctions472
    @coast2coastauctions472 Рік тому +1

    Great job, very easy to follow.

  • @pmojodomino
    @pmojodomino 4 роки тому +2

    Great job! Can you show us how to assemble the rigs on this board? Thank you.

  • @castncatchem3808
    @castncatchem3808 2 роки тому

    Thanks for sharing!!!! I want to make one now but I have to find your video and seeing how it’s used 😂

  • @mahonrijaussi2925
    @mahonrijaussi2925 2 роки тому +1

    Thanks for sharing this info... I tie my own rigs but this will help with better spacing...

  • @datilman9146
    @datilman9146 4 роки тому +1

    Thanks for putting this out. Like I've said in one of my previous comments, just got back in to fishing and went to B&M and grab a couple of rigs and really didn't like where the weight sat. But i get caught a couple keeper drum.

    • @thesinkerguy
      @thesinkerguy  4 роки тому +1

      Datil Man thank you so much! Keep after it and subscribe above some more good videos coming that will help!

    • @datilman9146
      @datilman9146 4 роки тому

      @@thesinkerguy sweet thanks🤙

  • @Albatross315
    @Albatross315 4 роки тому +1

    Thank you man for sharing.

    • @thesinkerguy
      @thesinkerguy  4 роки тому

      Albatross315 you are very welcome! Subscribe more great info is coming!

  • @mannyramos2327
    @mannyramos2327 4 роки тому +1

    I bought everything to make the board! Thanks Sir!

    • @thesinkerguy
      @thesinkerguy  4 роки тому +1

      Manny Ramos enjoy the process of making your board

  • @ReachDaBeach
    @ReachDaBeach 3 місяці тому

    I made a bastardized version roughly inspired by this. 2 clips, 3 short dowels and a tall screw for spools (some of mine have an I.D. of under 1/2"). Only 3 dowels as I just picked a single size; up until now, they were pretty random and usually shorter than intended. Now *much* quicker and more consistent. Thanks!

  • @whiskyrider88
    @whiskyrider88 4 роки тому +2

    Thanks Chip🎣🎣 Tight Lines!!!

    • @thesinkerguy
      @thesinkerguy  4 роки тому

      Bobby Coville absolutely keep em tight!

  • @fredricketts6204
    @fredricketts6204 Рік тому +1

    Just moved to East cost of Florida from Montana. Getting started with Surf Fishing and I have begun to build your Rig Board, Only question is what is the post at 18 1/2 inches used for. I watched your "How I tie my double dropper loop rigs" video and did not see you use that 2 inch post. Thanks for doing the videos, They are a big help...

  • @ReplayFan562
    @ReplayFan562 4 роки тому

    Awesome! Thank you!

  • @tommyo321
    @tommyo321 3 роки тому

    Love this board. I'm going to redo mine like rhis.

  • @matthewkonopa9135
    @matthewkonopa9135 Рік тому +2

    Sinker Guy, After searching high and low (No pun intended) for a decent surf rig, your video and rig board saved the day. I spent about $10.00 and made two in less than 30 minutes. Thanks again for sharing your love of fishing.

    • @thesinkerguy
      @thesinkerguy  Рік тому

      That is exactly why we do it!!! Thanks for the props!

    • @mentaltoughness6365
      @mentaltoughness6365 26 днів тому

      ​@thesinkerguy Good day sir. Can you please give me the measurements for the pompano rig tying board ?

  • @shakeme3290
    @shakeme3290 3 роки тому +1

    Thank you sir!! Slot City sent me. Subscribed

    • @thesinkerguy
      @thesinkerguy  3 роки тому

      Thank you so much, more great content coming soon.

  • @jeffreybabino8161
    @jeffreybabino8161 2 роки тому +1

    Wow that's a nice board

  • @bernie6956
    @bernie6956 Рік тому

    Thank you, good instructional information.

  • @alvinjohnson2004
    @alvinjohnson2004 Рік тому +1

    Great tool, thank you

  • @SlotCityFishing
    @SlotCityFishing 4 роки тому +2

    Legit broseph! Let me get dat board.

  • @honeycreekfarm4048
    @honeycreekfarm4048 Рік тому

    nice job

  • @saltandsurffishing
    @saltandsurffishing 2 роки тому +1

    What size drill bit did you use to drill the holes for the pegs?

  • @majixsoul1302
    @majixsoul1302 3 роки тому

    Within a couple of months, I’ll be headed your way with some techniques from yourself and Slot City Fishing to test my luck out on those waters for the first time. Adding surf fishing to my fishing career 😂

  • @demetriustrahan
    @demetriustrahan 7 місяців тому +1

    Great video. Very in detail. I am about to order the drill tool that you use to put the float and linecthrough and your spike likecweights as well. Thank you for showing me how to do this. I will try to make it. How do I make the drop loop smaller I don't like the access of line? I would like no more than 2.5 inches on each drop loop. Any suggestions.

    • @thesinkerguy
      @thesinkerguy  5 місяців тому +1

      I would just look at how I made my rig board and you can make a 2 inch drop instead of the 4 inch I make.

  • @crocogator569
    @crocogator569 4 роки тому +1

    Great video and I just subbed. Slot City send me!

  • @brucecoleman9205
    @brucecoleman9205 2 роки тому

    Just found your video and subscribed to your channel. Built the rig board over the weekend but am wondering what the middle peg at 18 1/2 inches is used for. Also, thanks for the prompt response and delivery of my Surf Fishing bundle from The Sinker Guy!!

    • @thesinkerguy
      @thesinkerguy  2 роки тому +1

      You can make bigger loops by using the other peg at 18 1/2 inches

    • @thesinkerguy
      @thesinkerguy  2 роки тому +1

      And you are so very welcome!!!!

  • @unclesam7212
    @unclesam7212 Рік тому +1

    Using a brad point bit will eliminate (practically) the need to "deburr" the drilled holes.

  • @telodge72ify
    @telodge72ify 3 роки тому +3

    Do you have a video on how you use the board to make rigs

    • @HuntingCreatures
      @HuntingCreatures 3 роки тому

      This video explains how to use the peg board: ua-cam.com/video/X5sLQH_N3BM/v-deo.html

  • @dakotathornton9446
    @dakotathornton9446 3 роки тому +1

    Who gave this a thumbs down? Thanks for the video!

  • @pmojodomino
    @pmojodomino 4 роки тому +1

    Awesome!! Do you have a video

    • @pmojodomino
      @pmojodomino 4 роки тому +1

      Do you have a video on how to make a rig using the board?

  • @calvinmcintyre5474
    @calvinmcintyre5474 2 роки тому

    What size drill bit for 2 and 5 inch line pegs? Thx

  • @javiermoredo
    @javiermoredo 3 роки тому

    Dude....the quality of instruction in your videos is from another planet!!! Thank you very much for teaching us!!! You are def a legend!!

  • @1ingigo2
    @1ingigo2 Місяць тому

    is there a videio showing how to use this board and what rigs one can tie with it?

    • @thesinkerguy
      @thesinkerguy  Місяць тому +1

      Yes it is a few before this one.
      Surf Fishing Florida how to tie the BEST surf fishing rig, (DOUBLE DROPER RIG). Jacksonville Florida
      ua-cam.com/video/zetVxfgZdGQ/v-deo.html

  • @chuckgonzales7754
    @chuckgonzales7754 Рік тому

    I normally use 4oz to 6 oz weights, would you recommend a 50# test so my weights don’t break off

    • @thesinkerguy
      @thesinkerguy  Рік тому +1

      10# test for each ounce. #50 test -5oz but will do fine with a 6oz

  • @jeffreybabino8161
    @jeffreybabino8161 2 роки тому

    Hi how do you use this board thanks

  • @mycapstone
    @mycapstone 2 роки тому

    Watched the whole video. How did you not include showing how to tie rigs with it? I was thinking to my self, "this looks cool", can't wait to see what it can do.

    • @thesinkerguy
      @thesinkerguy  2 роки тому

      I had already did a video on how to use it and thought it would be redundant to show it again. Search back on my channel on how to make double drop rigs

    • @mycapstone
      @mycapstone 2 роки тому

      @@thesinkerguy OK Thanks. I didn't know. I'll look for it.

  • @janettemartinez87
    @janettemartinez87 5 місяців тому +1

    Gonna get husband to make This template, I’ve tied my rigs for years, using my teeth and toes to help hold the fluorocarbon!🤣🤣🤣

    • @thesinkerguy
      @thesinkerguy  5 місяців тому

      This will help for sure! Look into our rig tying tool also.

  • @saltandsurffishing
    @saltandsurffishing 2 роки тому

    How thick is the wood that you used?

  • @kc2tbag
    @kc2tbag 3 роки тому

    How do you use it?

    • @thesinkerguy
      @thesinkerguy  3 роки тому

      There is another video on how to use it!

  • @stevet1674
    @stevet1674 4 роки тому +1

    I need to buy rig board from you (Sinkerguy)

    • @thesinkerguy
      @thesinkerguy  4 роки тому +1

      I have a few ready to make! I will get on it this week

    • @stevet1674
      @stevet1674 4 роки тому

      @@thesinkerguy Great !!! I'm really looking forward to purchased the board just let me know when and how...also like you to sign the board (Sinkerguy)

    • @thesinkerguy
      @thesinkerguy  4 роки тому

      You in the Jacksonville Fl area

    • @stevet1674
      @stevet1674 4 роки тому

      @@thesinkerguy I'm in Biloxi MS

  • @stevemiller7460
    @stevemiller7460 3 роки тому

    do you sell the Rig Board ? if so how much .

    • @thesinkerguy
      @thesinkerguy  3 роки тому +1

      If you are local to Jackson, Yes!
      Rig board kit I do sell also!
      They are $15! They come will all part you just need the board, drill and 2 bits.

    • @stevemiller7460
      @stevemiller7460 3 роки тому +1

      @@thesinkerguy i am in Houston TX would like to buy one, dont see it on the web site

    • @thesinkerguy
      @thesinkerguy  3 роки тому +1

      steve miller As of right now order the casting cannon and I will switch it on my end. You can leave a note also!

  • @NaomiMace-zt1du
    @NaomiMace-zt1du 10 місяців тому +1

    🐰😜😂

  • @COYOTE5053
    @COYOTE5053 2 роки тому

    This video would have been better if you had showed us how to tie a rig‼️