@@CliffordSchäfersküpperUntil you miss the slot on the capture clip and your camera hits the floor. There's a reason why Peak Design doesn't promote that hack.
That’s exactly it! I like the PolarPro one but I feel a bit more secure with the capture clip since it CANT go anywhere. Never had any issue with the PolarPro one but there’s always just a little fear.
@@dunnadidit That’s what stopped me getting the Polar Pro after I saw a clip of someone camera falling off the clip. This is great though. I already have the peak design kit and this breads new life into how I can use it. 🔥
It’s really solid if you make sure you’re connecting it properly. The only way I can think of that it wouldn’t work right is if it was user error… BUUUUUTTTTTT… we’ve all been there when we’re in a hurry and we don’t quite “make sure” so I’m always very careful with it lol.
Been using this exact setup and equipment for years and I swear by it! Love it so much! Though I will add one thing. Having the anchor on the right side so that you can also use the wrist-strap is amazing.
I went a bought a capture clip immediately after seeing your hack. Brilliant. It arrived today and I love it. Such a quality of life improvement. Thank you.
Just went out and got the clip and strap and I love it. It works even better because the slider that goes on the bottom of your camera can be put into the clip in 4 different directions. It's fantastic.
Just received my Peak Design Capture in the mail today. Follow you instructions and PERFECT. I am also able to keep my Peak Design Clutch attached which makes it a win-win for me. Many Thanks.
Already had the PD quick release, picked up the slide lite, and took this combo to San Diego for a week. Worked flawlessly. Thanks for such a genius idea, Dunna!
saw this right before a week in Boston and it was a fantastic carrying method. showed my brother and he immediately bought the quick release plate. big thanks!
I’ve been using these accessories for some years now, I love that hack of yours. The really clever aspect of the retainers that attach to the camera (or long lens) is the Wear Indication. At the point where the cord retainer folds over itself, at the camera anchor points, there will be abrasion taking place as the camera weight rubs the retainer cords against one another. When the cord begins to wear the sublayer of the cord will be revealed - and it is yellow, so it shows up and warns that cord and retainer unit needs to be swapped out. If that is ignored and wear continues the next sublayer of the cord is red and becomes visible. Time to REALLY get that retainer swapped out. I should add that, after three years of daily usage, I have not experienced any wear whatsoever. A superb pair of products and worth every penny/cent/centime…..
Been using both the Slide and Capture Clip for sometime, but never thought to combine them. Great tip! Another small tip... add the dongles your camera bag (if you use one) and you can multi-purpose the slide strap... saves a tad of weight and bulk.
I am a big fan of peak design products so was very interested in watching this Video.. Attaching the Capture Clip to the strap is nothing short of genius .. why did I not think of it. Superb hack 👏
I've been looking at the peak design straps for a long time and just didn't want to buy it without being able to see it, after seeing this video and being able to actually see and feel the strap during my recent NY trip I am so glad I got it.
Watched this couple days ago .. liked it so I ordered one and received it today .. it’s fantastic .. loved the build quality makes me comfortable leaving my $$$$ camera / lens hanging like that. Thanks again.
Your hack works very well for me. I was looking for this type of recommendation so that I carry my full frame camera more, rather than just relying on my smartphone. Thank you
I started watching this and I was like “ok how good is this hack”. Now my reaction is 🤯 I have the wrist strap and love it but thinking of getting the slide lite for my new a7c. I have a black rapid sport strap currently but its really bulky for the a7c.
Brilliant hack, thanks! 5:48 You can still have the right orientation of the camera (lens down) even if the clip is directly attached to your belt since the arca plate is square, it can go in sideways. The Pro Pad might make it more comfortable though, but I've found myself not using it as much recently and just attaching direct.
Oh my God, I thought l was the only one that took those extra strap holders and took those off immediately! Thank you SO much for creating the solution that you suggested at the end of the video - 🙏🏻💓
Haha you're not alone! Sony fixed their terrible dangly bits in the last handful of cameras, but man were they annoying before. I still like this solution better though!
The Peak Design Capture Clip 3 works much better than the older versions, it is now much easier to get back on, but must be lined up. I have used it on multi-day backpacking trips, even gone running with it on my pack. No problems at all. It works very well. And yeah I never lock it and have never had a problem. Attaching a strap to a capture clip is a great idea!
Holy cow this is genius. My biggest bug bear is the strap sliding about the place when I remove it from the camera. This solves it! It will make the times I need s strap bearable! Thanks Dunna!
i've used the capture clip during my last trip and more often than not the screws would come lose after a while and its pretty annoying / can be costly. PD should find a way to fix this. The large shoulder/neck strap is very comfortable, i definitely recommend.
I'm using PD Slide for 2 months now (and am big fan of!). If you do not want it to intefrere with your hand (in portrait camera position), try to attach anchors to left and bottom sides of your camera. (1:20) PD Slide is great btw (but need to remember that it takes some/more_than_some space in your bag!) Good idea with capture clip and slide. Thanks!
Brooooooo the hack is a game changer. That’s the kind of “influencers”, we need. Guys that comes with innovative solutions for ppl. Thanks for that bro 💪🏻💪🏻💪🏻💪🏻🔥🔥🔥🔥🔥
I love the Peak Design Capture Clip, and I’ve standardized everything on Arca Swiss plates, so I had a quandary when I wanted to add an L-Bracket. I didn’t want the bulk of an L-Bracket and a separate Capture Clip on the bottom. I found the 3 Legged Thing "Ellie PD Capture V3 Compatible Universal L-Bracket”. It has a Peak Design compatible clip machined into the bottom, saving some thickness. The bracket is Arca Swiss compatible in both landscape and portrait orientation. The bracket is “universally adjustable”, but you do want to pick the regular or short version so as not to block your battery door. The regular version works well on my Sony A7III.
I have the Ellie PD l-bracket. Great quality, only slightly annoyed it's only v3 compatible as I started with V1, then V2 and finally got the V3 as well. The old PD quick release plate works with all three, the Ellie PD only with V3. Apart from that it's a great product.
Now that's a really useful way to use the capture and slide. Beyond brilliant, I can get another capture and leave it on my backpack and use one on the camera strap. 🙌
the hack is brilliant, Peak Design should mention it.
Agree tho it would be alot cheaper to just use the pro pad
But you can do the hack over a long winter jacket - which I wish I could have done today!! My belt was hidden under many a layer.
I did it today with my big ol parka!
Great hack! Peak Design should add this to the next generation!
@@CliffordSchäfersküpperUntil you miss the slot on the capture clip and your camera hits the floor. There's a reason why Peak Design doesn't promote that hack.
This is the first “hack” video I’ve seen where my mind has actually been blown by the usefulness!
Genius. Also genius with the bungee jump voiceover.
😜
It's been years I use peak design strap and clip and I NEVER thought about this hack! Thanks! 🤘🏻
Genius. One of those hacks you think “Why didn’t I think of that”. Taking the Polar Pro feature and hacking it for Peak Design. Thanks for this. 👍
That’s exactly it! I like the PolarPro one but I feel a bit more secure with the capture clip since it CANT go anywhere. Never had any issue with the PolarPro one but there’s always just a little fear.
@@dunnadidit That’s what stopped me getting the Polar Pro after I saw a clip of someone camera falling off the clip. This is great though. I already have the peak design kit and this breads new life into how I can use it. 🔥
It’s really solid if you make sure you’re connecting it properly. The only way I can think of that it wouldn’t work right is if it was user error… BUUUUUTTTTTT… we’ve all been there when we’re in a hurry and we don’t quite “make sure” so I’m always very careful with it lol.
and Ulanzi same solution
Fantastic hack! Can't believe I have the Slide and a 2nd Capture, and never thought of this. Brilliant !!
Glad I could help!
Been using this exact setup and equipment for years and I swear by it! Love it so much! Though I will add one thing. Having the anchor on the right side so that you can also use the wrist-strap is amazing.
Agreed!
Do u have a Setup Image maybe? 😮
Which wrist-strap?
He's probably talking about the Peak Design wrist strap since it also uses the anchor system.@@Xanbunny
@@meyers3d Ah thank you very much
My mind was just absolutely blown. This is GENIUS. Buying the capture clip rn!
I went a bought a capture clip immediately after seeing your hack. Brilliant. It arrived today and I love it. Such a quality of life improvement. Thank you.
Just went out and got the clip and strap and I love it. It works even better because the slider that goes on the bottom of your camera can be put into the clip in 4 different directions. It's fantastic.
Just received my Peak Design Capture in the mail today. Follow you instructions and PERFECT. I am also able to keep my Peak Design Clutch attached which makes it a win-win for me. Many Thanks.
Love that hack. Nice to see an actual hack in videos like this.
Good job. Thanks for sharing
Already had the PD quick release, picked up the slide lite, and took this combo to San Diego for a week. Worked flawlessly. Thanks for such a genius idea, Dunna!
Niiice!
saw this right before a week in Boston and it was a fantastic carrying method. showed my brother and he immediately bought the quick release plate. big thanks!
YESSS!! Stoked it worked well for you!
I’m sure we’ve all seen tons of hacks but this one truly rocks! Love my PD Slide and now with your hack, I think I will love it every more!
Nice!
OMG THAT HACK IS GENIUS!!!! *Runs to set this up with my own gear immediately* Thanks, Dunna!
Haha nice! Have fun!
This is exactly what I needed. Perfect hack as I hate them dangling things on the Sony too.
YUUUUSSSSS!
Brilliant. I love how you combined the 2 products to make the whole even better…and glad I already have both. Thanks!
I think a lot of people already had these laying around! And the best part is that it’s super easy to take em apart and use them normally too!
Just bought the capture clip to use with the strap after watching your tip. Absolutely love it thanks
Nice!!
Just wanted to leave a comment to say how great of an idea it is to use the strap and the capture clip together. Very useful.
I’ve been using these accessories for some years now, I love that hack of yours.
The really clever aspect of the retainers that attach to the camera (or long lens) is the Wear Indication. At the point where the cord retainer folds over itself, at the camera anchor points, there will be abrasion taking place as the camera weight rubs the retainer cords against one another. When the cord begins to wear the sublayer of the cord will be revealed - and it is yellow, so it shows up and warns that cord and retainer unit needs to be swapped out.
If that is ignored and wear continues the next sublayer of the cord is red and becomes visible. Time to REALLY get that retainer swapped out.
I should add that, after three years of daily usage, I have not experienced any wear whatsoever.
A superb pair of products and worth every penny/cent/centime…..
Been using both the Slide and Capture Clip for sometime, but never thought to combine them. Great tip! Another small tip... add the dongles your camera bag (if you use one) and you can multi-purpose the slide strap... saves a tad of weight and bulk.
Agreed!!!!
what does this mean
I am a big fan of peak design products so was very interested in watching this Video.. Attaching the Capture Clip to the strap is nothing short of genius .. why did I not think of it. Superb hack 👏
The last one is the idea that i’ve been looking for, thanks!!!
Nice!
The combination use of the strap and clip is brilliant, thanks!
I like the hack, you just improved my life without costing me a penny.
I've been looking at the peak design straps for a long time and just didn't want to buy it without being able to see it, after seeing this video and being able to actually see and feel the strap during my recent NY trip I am so glad I got it.
That was big for me too
Holy cow! Game changer!
I, too, hate those little attachment tags on my camera, but I do want a strap every once in a while.
Glad I watched to the end for the hack. Awesome idea.
Watched this couple days ago .. liked it so I ordered one and received it today .. it’s fantastic .. loved the build quality makes me comfortable leaving my $$$$ camera / lens hanging like that. Thanks again.
Your hack works very well for me. I was looking for this type of recommendation so that I carry my full frame camera more, rather than just relying on my smartphone. Thank you
does it add more weight or have some sort of con to it?
Just came across this video. This hack is incredible!!!!! Will definitely be using this!
Just coming back to this vid to say that this is the best way to use the strap. Thank you for suggesting this!!
That hack is A+ !!
I started watching this and I was like “ok how good is this hack”. Now my reaction is 🤯 I have the wrist strap and love it but thinking of getting the slide lite for my new a7c. I have a black rapid sport strap currently but its really bulky for the a7c.
MIND BLOWN!!! Will be using this hack. Immediately
Nice!
Brilliant hack, thanks! 5:48 You can still have the right orientation of the camera (lens down) even if the clip is directly attached to your belt since the arca plate is square, it can go in sideways. The Pro Pad might make it more comfortable though, but I've found myself not using it as much recently and just attaching direct.
Very true!! I guess I was thinking about being able to put the camera in with the help of gravity to keep it in place. But it does work either way!
Oh my God, I thought l was the only one that took those extra strap holders and took those off immediately! Thank you SO much for creating the solution that you suggested at the end of the video - 🙏🏻💓
Haha you're not alone! Sony fixed their terrible dangly bits in the last handful of cameras, but man were they annoying before. I still like this solution better though!
That hack though... as someone who already uses this system, i found that to be worth the whole video. Thanks for sharing!! will try that for sure.
Cheers!!
Peak Design, well worth the money. Very comfortable and the strap came with two sets of quick release tabs so I can quickly swap out cameras.
BRUH IM MIND BLOWN! I've always wondered what those clip things were I saw other photographers using! Thanks Dunna!
You're so welcome!
This hack is amazing! Love it!
This is a brilliant and clever way of using those Peak Design products together! Thank you for showing them to us!
Thanks for watching!
Fantastic hack! This solves several of my frustrations with the Peak Design anchors.
Yaaaasss!!
that strap and capture clip hack is amazing and smart! THANKS!
Dude, you just changed the strap game completely with that hack! Amazing! Definitely going to use it
Glad to hear it!
You're a god damn genius. I have multiples of these straps and the capture clip and I never once thought of doing this.
Brilliant usage of the eyelets with capture clip. This has made getting the slide strap a lot more appealing.
The Peak Design Capture Clip 3 works much better than the older versions, it is now much easier to get back on, but must be lined up. I have used it on multi-day backpacking trips, even gone running with it on my pack. No problems at all. It works very well. And yeah I never lock it and have never had a problem. Attaching a strap to a capture clip is a great idea!
I love my slide lite and capture clip!! Thank you for the hack!!
Glad you liked it!
I've had the Capture Clip for MONTHS, and didn't realize there was a locking feature until just now. Dunna, you've done it!
Seriously. Brilliant!
Thanks for sharing.
Cheers, mate!
Cheers!!
Holy cow this is genius. My biggest bug bear is the strap sliding about the place when I remove it from the camera. This solves it! It will make the times I need s strap bearable! Thanks Dunna!
So glad to help!
Thanks for the trick! Looks fun :)
I've just seen the hack, and it's a total game changer. Subs for you!
Oh man. You've just revolutionised my use of the slide strap 👏🏻👏🏻👏🏻😊.
Dude. Pro move. I might have to do that when I shoot weddings, it sounds perfect! I was planning to buy the slide strap anyway.
Bam!
Excellent! Great info, no fluff, and terrific hack that will change my setup significantly. Thanks!
What an amazing hack. Many thanks
This is a really great tip! It's so obvious once you see it, but not everyone will ever come up with a product synergy like this. Thank you!
Excellent hack, thank you very much for sharing it with us!
Ok... that hack is amazing. That is pure genius and I will forever use that.... Thanks dude and great video!!!
Thanks dude!
I love how you also say the CAD price, thank you!!
You know it!
thats a brilliant hack man. cheers
Glad you liked it!!
Great little "hack"! I just bought a Sony 100-400 GM lens, and watching your channel is very helpful.
Awesome! Thank you!
Exceptionally useful video!
GENIUS hack bro!🤩👏🏻👏🏻👏🏻
Sold Ive been kicking around all kind of ideas and this is by far the best!!!
Thanks Dunna! Perfect for our family trip!
Genius hack!! 👏 👏
Genius hack! Thank you.
Cheers!
Dunna Did Good! Nice products and great hacks. Thanks man!!!!
Awesome hack I love it man!
Thanks!!
Brilliant! Great vid, as always!
Thanks!!
Genius idea. Gonna do the same right now.
Noice!
You're a genius! Big brain hack right here!
I'm pretty sure Peak Design didn't see this coming!
Haha 😂 I’m sure they’ve thought of it at some point. They’re a bunch of geniuses over there!
Fantastic hack! Thank you 🙏
Good video ... thanks! The Slide/Capture Clip hack is excellent!
Glad it was helpful!
Oh wow, I am definitely going to try this! Fun things to do with all my Peak Design accessories!
Super useful tip, thanks for sharing !,
i've used the capture clip during my last trip and more often than not the screws would come lose after a while and its pretty annoying / can be costly.
PD should find a way to fix this.
The large shoulder/neck strap is very comfortable, i definitely recommend.
Blown my mind when it come together ...
I'm using PD Slide for 2 months now (and am big fan of!). If you do not want it to intefrere with your hand (in portrait camera position), try to attach anchors to left and bottom sides of your camera. (1:20)
PD Slide is great btw (but need to remember that it takes some/more_than_some space in your bag!)
Good idea with capture clip and slide. Thanks!
That's pretty cool, never seen that kind of configuration before. Thanks Dunna
The second hack is excellent! Thank you for sharing!
Brooooooo the hack is a game changer. That’s the kind of “influencers”, we need. Guys that comes with innovative solutions for ppl. Thanks for that bro 💪🏻💪🏻💪🏻💪🏻🔥🔥🔥🔥🔥
Now this is genius! Definitely solves my problem! Thank you!
Thank you this video helped me out a lot!
Wow this is an eye opening genius hack!
Glad you liked it!
WOW! What a great idea to combine the two. Just solved a problem for me as I often have to wear my backpack to use the Capture Clip. Thanks
Brilliant!! Well done!!
I love the Peak Design Capture Clip, and I’ve standardized everything on Arca Swiss plates, so I had a quandary when I wanted to add an L-Bracket. I didn’t want the bulk of an L-Bracket and a separate Capture Clip on the bottom. I found the 3 Legged Thing "Ellie PD Capture V3 Compatible Universal L-Bracket”. It has a Peak Design compatible clip machined into the bottom, saving some thickness. The bracket is Arca Swiss compatible in both landscape and portrait orientation. The bracket is “universally adjustable”, but you do want to pick the regular or short version so as not to block your battery door. The regular version works well on my Sony A7III.
I gotta look into that!
I have the Ellie PD l-bracket. Great quality, only slightly annoyed it's only v3 compatible as I started with V1, then V2 and finally got the V3 as well. The old PD quick release plate works with all three, the Ellie PD only with V3.
Apart from that it's a great product.
Thanks for the video. I have a Peak Slide strap and just learned 2 features I was not aware of.
You're welcome!
Excellent hack!
Cheers!
Always like your tutorials and reviews, another great one. I sold and love the hack.
Great idea!!!
Literally subbed because of your sign! Thumbs up brother
Thanks for coming along for the ride!
Now that's a really useful way to use the capture and slide. Beyond brilliant, I can get another capture and leave it on my backpack and use one on the camera strap. 🙌
Always winning hearts! Thankyou dunna!🤘🙌
I try!
Nice idea!