Absolutely wonderful to have such good videos that save people so much money and give an understanding to how much we get ripped off because we own a Mercedes by the dealerships. I followed the direction and was able to do my oil change in 24 minutes. Thank you for saving me $275.00 to $300.00 Dollars. If you are ever in the Orlando area please look me up and I'll treat your dad and the whole family to dinner. Thank you so much !!! XYZ Auction
Very detailed and shows each step unlike other videos seen online. Thank you for posting and being so detailed and specific. I have a 2013 GLK 350 4Matic but appreciate this video!
Excellent video, only thing I do different is I add the oil and check for leaks before replacing the shroud. Please appreciate your father-son time, it's what life is about, making memories.
WOW EXPLAINED PERFECTLY. BEST ON YOU TUBE TO SHOW AMD EXPLAIN EASILY!!! I KMOW HAVE THE CONFIDENCE TO CHANGE MY OWN OIL AMD FILTER WITH CONFIDENCE!. THAMK YOU AMD GREAT TEAM FATHER AND SON!!! I LOBE HOW THE DAD EXPLAINES EVERYTHING SO THOROUGHLY AMD FAST AMD EFFICIENCY!!! NO TIME OR EXTRA TALK AT ALL I LOVE IT! XIE XIE!!!
May I simply compliment you on your excellent English - I wish I could speak a second language with as much clarity and minimal accent as you, sir. Very impressive and appreciated, you are more easy to understand than many of the physicians I work with on a regular basis!
Great specifics on all but the difficulty getting the undershield back in place. First, you can't reach the back two screws without lifting the truck some. Worse, because of the angle the rear of the plastic shield requires to get back above the rear cross piece and into place to screw back in, you really have to lift the front even more to be able to get enough angle to get it jammed up in there. And you most definitely can not start putting it back on from the front back. Back has to go up/back into that slot first, then work your way back to front. All this on a 2014, but I suspect others are similar. Thanks for the video - saved me rummaging around for proper sized sockets. First time was a little over an hour with two beers and a sprinkling of profanities. Next time should be done in 30 or less minutes and without scarring any children.
Excellent video. I enjoyed watching your father-son team. The only thing I might add are the torque specs for the oil filter. It is 18.5 ft-lbs (25 Nm). I haven't found the torque specs on the drain plug.
Nice video👍 I just purchased a new '15 ML 400 and I already know the high labor cost for Mercedes at the dealership. Luckily for me, I'm a DIY mechanic at home working on plenty of cars but not a Mercedes yet.
Much easier option is to extract using a pump from the dipstick route. I bought a mityvac and it makes the job a breeze without the need to go under the car or removing any of the shields and covers
You're a good team...Dad explained it very very good! Hopefully some day I'll do it on mine, [bluetec] not sure if it's the very same but most likely it is. Most do the vacuum method but I think this bottom drain is better, just takes longer.
Excellent video. Thank you. I wonder, do you need to add more oil than shows initially on the dipstick to account for the filter, as you do for down-facing filters?
I worked on a mercedes dealer and worked on many of these. I also work on some bmws on the side. German cars arent that special for oil changes. They are as easy to change the oil as your typical toyota, honda, ford or chevy. You just have to know what you are doing.
You are correct that it's suppose to be 8.5 quarts...he used 7.5 quarts. He should have started the engine and let oil get funneled through the oil filter and re-measure.
Great video.....I would suggest using a 1 QT. measuring container to add the additional amount of oil after pouring the first 5 quarts......use the 2nd 5qt container to fill the 1 QT. Container.....I also use BG Products #109 as a pre-oil change flush to remove the sludge, followed up with BG MOA (Motor Oil Additive) ….(* do not over fill crankcase.)…..and add BG 44K to gas tank at every oil change.
Nice video. I will attempt to do it this weekend. Are you Vietnamese? (LOL...just want to see if my intuition is correct.) Your dad's English is excellent btw.
thanks for the great video.. some tech told me that mercedes do not actually open the bottom covers they simply suck the old oil out then put the new . claiming that opening covers every time will weaken screws.
jdroid And exactly how are they supposed to do that? I just wonder, because as a previous MB owner, there's no way in earth you can have access to the oil drain plug whitout removing that cover.
All that work. Why don't you use the oil pump, it is more easily. I use Mityvac to pump out my oil and take it to Autozone to dump out my use oil. Mercede use the same method as I am also.
29 INCHES your dad very well .....My Mercedes Benz 2013 C Class engines style 100% same as your dad ML , if your dad replace engine Air filter or spark plugs , could you please upload the video??
"The joy of working on your own car" well said. Nice video. Thank you.
This is probably the best oil change video I've ever watched. Very informative and clear instructions. Thank you!
Absolutely wonderful to have such good videos that save people so much money and give an understanding to how much we get ripped off because we own a Mercedes by the dealerships. I followed the direction and was able to do my oil change in 24 minutes. Thank you for saving me $275.00 to $300.00 Dollars. If you are ever in the Orlando area please look me up and I'll treat your dad and the whole family to dinner. Thank you so much !!! XYZ Auction
The best video I have seen on how to change the oil on my Mercedes! I love the attention to detail.
Thank you so much.....all the way from London.
Very detailed and shows each step unlike other videos seen online. Thank you for posting and being so detailed and specific. I have a 2013 GLK 350 4Matic but appreciate this video!
Excellent video, only thing I do different is I add the oil and check for leaks before replacing the shroud.
Please appreciate your father-son time, it's what life is about, making memories.
Siphon oil from the dip stick is Mercedes Benz recommenced way to change the oil. You don’t even ever have to get under the car.
I love the way how he explained everything better than anybody else , great vid
WOW EXPLAINED PERFECTLY. BEST ON YOU TUBE TO SHOW AMD EXPLAIN EASILY!!! I KMOW HAVE THE CONFIDENCE TO CHANGE MY OWN OIL AMD FILTER WITH CONFIDENCE!. THAMK YOU AMD GREAT TEAM FATHER AND SON!!! I LOBE HOW THE DAD EXPLAINES EVERYTHING SO THOROUGHLY AMD FAST AMD EFFICIENCY!!! NO TIME OR EXTRA TALK AT ALL I LOVE IT! XIE XIE!!!
Great explanation and very detailed. Looking forward to working on my own car.
May I simply compliment you on your excellent English - I wish I could speak a second language with as much clarity and minimal accent as you, sir. Very impressive and appreciated, you are more easy to understand than many of the physicians I work with on a regular basis!
Great job! Your instructions were great ; easy to follow and accurate.
Them orange flip flops. 😂😂😂 I love it! Great video!
Awesome “How too” video !
Thank you for saving me $250
EXCELLENT video! Your attention to details is appreciated by a newbie DIYer like me.
Thanks buddy I love how you explain everything. Thanks again
Great specifics on all but the difficulty getting the undershield back in place. First, you can't reach the back two screws without lifting the truck some. Worse, because of the angle the rear of the plastic shield requires to get back above the rear cross piece and into place to screw back in, you really have to lift the front even more to be able to get enough angle to get it jammed up in there. And you most definitely can not start putting it back on from the front back. Back has to go up/back into that slot first, then work your way back to front. All this on a 2014, but I suspect others are similar.
Thanks for the video - saved me rummaging around for proper sized sockets. First time was a little over an hour with two beers and a sprinkling of profanities. Next time should be done in 30 or less minutes and without scarring any children.
Thank you so much for sharing it in this detail. Which includes the nut size and filter removing and which filter to order . That helps a lot .
Great video! Very detailed & thorough...
great video, the only comment would be to lubricate the new washer ring with some oil before putting it on the filter housing
Very helpful video, thanks. You and your son are great. Note, the new oil is 5 quart bottles not a gallon.
Just pay 200$ today to get the oil change after watching this video is seem. Pretty easy so I'm gonna do it myself next time very useful video thank 😀
excellent video on this step by step.. thank you very much you 2..
Great video. I'm gonna change the oil on my 2013 ML 350 this weekend. Many thanks!
Great explanation, nicely done!
Just for clarity: those are 5 quart jugs. Not 1 gallon (4qt) jugs. This vehicle takes around 7.5 quarts
Wow, awesome. Very nice. Ty so much. Make sure people know this is the same motor as the gle 350 through 2019 but NOT 2020
Good video brother...you are so detail oriented.....
Excellent video. I enjoyed watching your father-son team. The only thing I might add are the torque specs for the oil filter. It is 18.5 ft-lbs (25 Nm). I haven't found the torque specs on the drain plug.
Nice video👍 I just purchased a new '15 ML 400 and I already know the high labor cost for Mercedes at the dealership. Luckily for me, I'm a DIY mechanic at home working on plenty of cars but not a Mercedes yet.
This oil change is 180 dollars at the dealership.. completely ridiculous
@@roodick85 That's cheap, I was quoted 350 Euros and that was with cheaper oil.
Best video I ever watched..thank you so much..
Dad's awesome. You guys rock.
Absolutely joy to watch. Well done and Thank you for sharing the knowledge.
sehr gut erklärt , Grüße aus Deutschland ....
Great work from Germany 🙏
Much easier option is to extract using a pump from the dipstick route. I bought a mityvac and it makes the job a breeze without the need to go under the car or removing any of the shields and covers
Excellent video... thank you... My 16 yr old Grandson will one day be an expert. It saved him !!
very nice video, thanks a lot, I like how calm you explained it
Super erklärt . schöne Grüße aus Deutschland.
Great and helpful video. Please more videos on ML350.
Thank you for video
So detailed oriented. Very good video
You're a good team...Dad explained it very very good! Hopefully some day I'll do it on mine, [bluetec] not sure if it's the very same but most likely it is. Most do the vacuum method but I think this bottom drain is better, just takes longer.
I think I'm in love!
I love this video. In-depth.
Great video!
This was very detailed video, very helpful.
Nice video.
great video
WOW What a great video!!!!!!!
this man is a great man
The new oil filter is empty until the engine is cranked, so I think it would be a good idea to re-check the oil level after cranking the engine.
Awesome video, thanks for posting!
Can you make a video to change 2013 ML350 Headlight bulb? Thanks. Also Air filter and cabin filter?
This was super helpful. thanks for uploading!
Its so wonderful presented. Thank you. I wait for more your video
My only question is how to put jack stands up easily? It took me too much effort to get it up. Thank you.
Great job, thank you!
Easy and cheap. Thanks for this video.
Cool video, very good explanation!!
Great video and very helpful. Thanks for that!
Good video.
Excellent instructions. Thanks
awesome video. Very detailed.
Very good thanks
I like how you take care about your beauty ml :)
love the flip flops
I like his jacket
Great video, Thanks!
plz make more videos of maintainence of 2013 ml350
Excellent video. Thank you. I wonder, do you need to add more oil than shows initially on the dipstick to account for the filter, as you do for down-facing filters?
I worked on a mercedes dealer and worked on many of these. I also work on some bmws on the side. German cars arent that special for oil changes. They are as easy to change the oil as your typical toyota, honda, ford or chevy. You just have to know what you are doing.
Thanks for this great video, this is a diesel or gasoline engine.
thanks for the video... I wear my flip flops in the garage too.. lol... if u can do other maintenance items for ML please
Thanks, this was very helpful.
Thanks. It's very informative.
How do you reset the indicator inside the dash of the vehicle please?
Very good for saved a lot how about replacement air filter
The drain plug what you remove the crush washer still stick to the pan Every drain plug need a crush washer
Great video and very helpful, but the ML is supposed to hold 8.5 Quarts of oil. (A little over 2 gallons)
You are correct that it's suppose to be 8.5 quarts...he used 7.5 quarts. He should have started the engine and let oil get funneled through the oil filter and re-measure.
I guess 7 to 7.5 should be good enough. Hope this helps. Refer here -oil-change.info/mercedes-benz-m-class-engine-oil-capacity/
8.5 is bluetec.
5/16" is the same as 8mm. I always use my 5/16 nut driver.
needs a copper crush washer on drain pan plug
Great video.....I would suggest using a 1 QT. measuring container to add the additional amount of oil after pouring the first 5 quarts......use the 2nd 5qt container to fill the 1 QT. Container.....I also use BG Products #109 as a pre-oil change flush to remove the sludge, followed up with BG MOA (Motor Oil Additive) ….(* do not over fill crankcase.)…..and add BG 44K to gas tank at every oil change.
You're dad is awesome
HI, could you put in on a video about change spark plug please in a ML 400 2015 V6 BITURBO???
Nice video. I will attempt to do it this weekend. Are you Vietnamese? (LOL...just want to see if my intuition is correct.) Your dad's English is excellent btw.
Can you make a video on how to replace engine air filter please.
Good job bro
很有帮助的视频。谢谢 。
Great video. Have you changed the engine air filter for this ML350?
No, sorry.
29Inch, thanks for the video. please tell your dad he is doing a great job. please post more videos on ml350 services.
thank you.
Great, thank you
How often do you change the oil on this model? Thank you. Great job, not only on changing the oil but also well explained .
You can go longer, however it's easy to remember a round figure such as 5K or 7500K....
Great!
Don't forget to put oil on the O-ring.
thanks for the great video.. some tech told me that mercedes do not actually open the bottom covers they simply suck the old oil out then put the new . claiming that opening covers every time will weaken screws.
jdroid And exactly how are they supposed to do that? I just wonder, because as a previous MB owner, there's no way in earth you can have access to the oil drain plug whitout removing that cover.
They use a vacuum extractor to literally suck the oil out through a tube... from the top.
All that work. Why don't you use the oil pump, it is more easily. I use Mityvac to pump out my oil and take it to Autozone to dump out my use oil. Mercede use the same method as I am also.
You talked a lot about the bolts (8) and where they go. What size are the bolts?
I hate this deepstick on ML350 wich turns as you stick it in and while doing that it shows different level every time you check
thanks, nice video
very well done
29 INCHES your dad very well .....My Mercedes Benz 2013 C Class engines style 100% same as your dad ML , if your dad replace engine Air filter or spark plugs , could you please upload the video??