I'm currently working on a double din radio housing to put in place of the center cup holder. I have a few templets made, and if its successful I'll find a way to send some pics. Also working on a custom rear bumper. I have a template made for it, just need to build it. Thanks for the videos you have done, they have been helpful with my build.
Great videos. I've done a lot of wiring on my Jeep, but I still learned something from this, and the last wiring video that you did. My question is, how hard would it be to make the front turn flash sequence go from the center of the grill to the outside instead of outside to center? In other words, in the actual direction that you are turning. It would make more sense that if you're turning left, they should flash left. Just a thought. Take care and keep up the good work.
Thank you. I agree with you. But unfortunately how I had to pay the lights out inside the housing it didn’t allow me to do that no room for the wiring.
Like your channel! I have a 2022 uforce xl I love it, can I use the Hopkins 7889 trailer plug to wire the rear lights rather than using the small 3/4 lights.
One more question re: the headlight install. I saw you cut the headlight wiring on both sides(light blue and orange) when you reinstalled the headlights which wires did you cut to tap into to connect?
Nice video but some things are missing. How did you get the wires to the switches? You said they'd be right behind the panel, but how did they get there? When doing the horn, I have a couple questions, first, are you on the driver's side there? And second, is the horn wire already there from factory? Also, when you played the video within this video, when you finished you said you've seen what we did on that Uforce, you can do that or do what I did. But that video doesn't show what you did? What did you do on the Uforce? I apologize for all the questions but if I don't ask then I can't know what you did.
Really looking good, I think you are doing a great job on the UForce. I do have a concern about the turn signals in the front. When you activated a turn signal I was a little confused at first looking for the one blinking. I see it turned a different color but the other side continued to blink as it was set up to do so. If I was watching you at an inspection I might not pick up on which direction you are signaling to turn to. For one I would probably just watch how awesome your rig looks with all the LED lighting but I probably wouldn't notice the blinker. Maybe ther is a way to turn off the LED action for the non blinking light when blinker is activated? Thay way only the side that blinks would be an indicator for the direction you are signaling. I'm not sure if that made any since? My intention for commenting is good, I'm looking at this from someone negotiating an intersection with your UForce. But your hard work on this build is great.
Hello there buddy. You made perfect sense. In the video I mentioned you can make them steady one color. I didn’t go in to great detail. But let me explain how we are going to utilize these “safely” when on the road. We are going to set them to 1 solid color such as white most likely. So that when using the turn signals you can distinguish witch way we are turning. I hope this explains it. I will also explain in a future video.
@@R.N.GPerformance That sounds great and good to know. I was watching the video an all I could look at is awesomeness. Just wanted to make sure you had it covered. If there was any tweaking or fine tuning this is where you would have wanted to do it. I look forward to watch your progress. When evening comes around and I settle down, I like to see if there is a new video.
What did you ground the front lights too? i have my positive on the orange and light blue but need to find a good place to ground the negative. Any advice would be helpful.
@@johncarty4535I just pulled the panel on my 2023 and noticed there were 2 places that already had wiring ran to them, just no switch. Do you know what wires those control?
That's incorrect. In order to use the factory-installed wire harness you have to buy the headlamps and tail lights or splice into the factory harness and run new wire to your lights of choosing. @@johncarty4535
hi. i have a 2023 Cfmoto uforced 600 trying to do the turn signal kit got from the dealership, works for a 22 model can’t seem to find the turn signal relay under the hood, or in the dash. any suggestions would be greatly appreciated
Quick qestion what model year was your uforce? The flasher part number you gave on goes until model year 22. Do you know if its the same on a 2023 uforce 1000 xl?
what did you end up doing for the rear turn signals? I have checked the rear of mine, and I have a metal bracket that runs right behind the plastic under the tail lights. Considering opening up the rear tail light, and seeing if there is a way to separate the upper and lower reverse lights. Then run a reverse signal to one, and turn signal to the other and add some transparent amber tape.
i have an cfmoto 800 left and right turn signals work, but the hazard light doens't it kinda blinks on only one side, any idea is there a relay somewhere which i can check?
The videos are great, but you skip over some of the most basic stuff (maybe you have a video showing it somewhere?). For example, you already have the hood and side pieces removed in your how-to's, but for those of us new to these machines, maybe that would be nice to cover? Or how to remove the switch panel (again, it was already removed in this video). I did manage to remove the side panel without breaking anything, but it would have been nice to know about the 3 rubber locks. As to reinstalling, I've been struggling with it for 30 minutes now with no luck, so there must be some trick to getting it lined back up? Obviously, you've figured it out, but it would be nice to share that.
i myself wouldnt cut shit cause once you cut it your done have to replace it all if it isnt plug and play shouldnt even doit you start cutting stuff its like a magic 8 ball problems in the future
Hell yeah I plan to get whips but if you make your own I would wait and buy yours for sure
I’m definitely looking in to it. I do have some nice ones on my website tho.
I'm currently working on a double din radio housing to put in place of the center cup holder. I have a few templets made, and if its successful I'll find a way to send some pics. Also working on a custom rear bumper. I have a template made for it, just need to build it. Thanks for the videos you have done, they have been helpful with my build.
That would be awesome 😎 can’t wait to see it when it’s done. Your very welcome
Great info and Instructions!Ordered those parts and am gonna tackle it asap
Thank you 🙏
very nice build now you need to add some heated seat
Thank you 🙏
Great videos. I've done a lot of wiring on my Jeep, but I still learned something from this, and the last wiring video that you did.
My question is, how hard would it be to make the front turn flash sequence go from the center of the grill to the outside instead of outside to center? In other words, in the actual direction that you are turning. It would make more sense that if you're turning left, they should flash left.
Just a thought. Take care and keep up the good work.
Thank you. I agree with you. But unfortunately how I had to pay the lights out inside the housing it didn’t allow me to do that no room for the wiring.
Like your channel! I have a 2022 uforce xl I love it, can I use the Hopkins 7889 trailer plug to wire the rear lights rather than using the small 3/4 lights.
I’m sure you can. Thank you 🙏
One more question re: the headlight install. I saw you cut the headlight wiring on both sides(light blue and orange) when you reinstalled the headlights which wires did you cut to tap into to connect?
Nice video but some things are missing. How did you get the wires to the switches? You said they'd be right behind the panel, but how did they get there? When doing the horn, I have a couple questions, first, are you on the driver's side there? And second, is the horn wire already there from factory? Also, when you played the video within this video, when you finished you said you've seen what we did on that Uforce, you can do that or do what I did. But that video doesn't show what you did? What did you do on the Uforce?
I apologize for all the questions but if I don't ask then I can't know what you did.
Really looking good, I think you are doing a great job on the UForce. I do have a concern about the turn signals in the front. When you activated a turn signal I was a little confused at first looking for the one blinking. I see it turned a different color but the other side continued to blink as it was set up to do so. If I was watching you at an inspection I might not pick up on which direction you are signaling to turn to. For one I would probably just watch how awesome your rig looks with all the LED lighting but I probably wouldn't notice the blinker.
Maybe ther is a way to turn off the LED action for the non blinking light when blinker is activated? Thay way only the side that blinks would be an indicator for the direction you are signaling.
I'm not sure if that made any since? My intention for commenting is good, I'm looking at this from someone negotiating an intersection with your UForce. But your hard work on this build is great.
Hello there buddy. You made perfect sense. In the video I mentioned you can make them steady one color. I didn’t go in to great detail. But let me explain how we are going to utilize these “safely” when on the road. We are going to set them to 1 solid color such as white most likely. So that when using the turn signals you can distinguish witch way we are turning. I hope this explains it. I will also explain in a future video.
@@R.N.GPerformance That sounds great and good to know. I was watching the video an all I could look at is awesomeness. Just wanted to make sure you had it covered. If there was any tweaking or fine tuning this is where you would have wanted to do it.
I look forward to watch your progress. When evening comes around and I settle down, I like to see if there is a new video.
What did you ground the front lights too? i have my positive on the orange and light blue but need to find a good place to ground the negative. Any advice would be helpful.
Any bolt on the frame will do
Will these parts work on a 2023 UFORCE 1000? I know some parts do and some don't? Thanks for the videos!
I’m not sure.
The 2023 model just needs the switch and flasher. All harnesses are already in place
@@johncarty4535I just pulled the panel on my 2023 and noticed there were 2 places that already had wiring ran to them, just no switch. Do you know what wires those control?
That's incorrect. In order to use the factory-installed wire harness you have to buy the headlamps and tail lights or splice into the factory harness and run new wire to your lights of choosing. @@johncarty4535
I ordered the parts but for some reason I can't find the wires to plug them in. Can u help?
I am wanting to do this on my 22 cforce 600 1up. With the factory light would be ideal. Any info is greatly appreciated
A couple videos back I show how to do this.
Any chance for a guide for the US version of the Cforce 1000 Overland?
I don’t have that unit at this time buddy.
Need to say what size wire size so we get the right butt splice
Have you used a trailer switch on the rear bed if so how would i go about wiring it
I haven’t
hi. i have a 2023 Cfmoto uforced 600 trying to do the turn signal kit got from the dealership, works for a 22 model can’t seem to find the turn signal relay under the hood, or in the dash. any suggestions would be greatly appreciated
23 is different then 22 buddy
@@R.N.GPerformance so I need a different flasher relay then
Have you had time to put a complete kit together for this mod?
Thanks
I haven’t.
Quick qestion what model year was your uforce? The flasher part number you gave on goes until model year 22. Do you know if its the same on a 2023 uforce 1000 xl?
It’s different for the 23 I don’t have that. I’ve just been selling whole kits to folks we have universal kits www.rngperformance.net
I need price of wiper motor
We have that here rngperformance.net/shop-parts-accessories/ols/products/utv-windshield-wiper-kit-with-washer-bottle
Is there a way to plug and play the rear led turn signals? If so, can you put up a picture of the connector type needed?
There is. But the connectors are hard to get you just need a metal pin pull a pin out and match it with something on Amazon they are hard to find tho.
@@R.N.GPerformance ok thanks for confirming. Are you gonna be putting a horn package together?
Hey Redneck, I love your show. I just picked up a 950 Ho Ex and can’t find info on the best fuel to use. Is no ethanol preferred, octane grade?
Premium at the pump is recommended
Where do you ground the front to
To the frame
what did you end up doing for the rear turn signals? I have checked the rear of mine, and I have a metal bracket that runs right behind the plastic under the tail lights. Considering opening up the rear tail light, and seeing if there is a way to separate the upper and lower reverse lights. Then run a reverse signal to one, and turn signal to the other and add some transparent amber tape.
We used LED Whips as the turn signals.
@@R.N.GPerformance never thought of that, thank you for confirming.
@@supermaga5351 your welcome 🙏
With the led you put in the headlights will that stay off and not flash different colors and just use it as a turn signal
Yes
Question? Does the 1000 uforce have the same headlights as the 1000 four wheeler
Yes
I installed my horn exactly like you did. The horn worked for about 3 days. Now it doesn’t work anymore. Any ideas why?
Very nice does it have white too? If so how much you going to charge me to do that i love it
They will do white also. I’m not sure 🤔
Ya I would buy whip if you made them
Heck yes. Thank you 🙏
Do you have to have the flasher relay for the signals to work ? I wired mine up but signal don’t work and I don’t have flashers plug
Yes
Is there a way to use the existing tail lights as your rear turn signal
Idk 🤷♂️
Rear orange wire you cut. I see 2 orange wires, one solid the other with yellow line in it.
It’s just the orange one
@R.N.GPerformance thank you very much!
Do you have a windshield wiper kit?
No sir I don’t. I’m sorry
i have an cfmoto 800 left and right turn signals work, but the hazard light doens't it kinda blinks on only one side, any idea is there a relay somewhere which i can check?
It might be the hazard switch
@@R.N.GPerformance OK will replace this thanks!
waiting for your video on the handbrake adjustment :)
What wire is the the brake light wire
I don’t remember buddy.
Are you using OEM headlights?
Yes
The videos are great, but you skip over some of the most basic stuff (maybe you have a video showing it somewhere?). For example, you already have the hood and side pieces removed in your how-to's, but for those of us new to these machines, maybe that would be nice to cover? Or how to remove the switch panel (again, it was already removed in this video). I did manage to remove the side panel without breaking anything, but it would have been nice to know about the 3 rubber locks. As to reinstalling, I've been struggling with it for 30 minutes now with no luck, so there must be some trick to getting it lined back up? Obviously, you've figured it out, but it would be nice to share that.
I purchased the oem taillights with turn signals and they don’t work correctly. Supposedly dealer has CF Moto involved cause no one knows why
That’s definitely weird for sure. They should work.
@@R.N.GPerformance on drivers side I jumped the yellow wire over to orange just like they told me and I lose reverse then
Is the uforce 600 pretty much the same?
Yes
Nobody will know that's a turn signal with the other side flashing! LOL
😂 we shut them off on the street or put them solid.
jelly
💪🤟👊
Now figure out how to put ac in the cab
Lol
i myself wouldnt cut shit cause once you cut it your done have to replace it all if it isnt plug and play shouldnt even doit you start cutting stuff its like a magic 8 ball problems in the future
Only if some hillbilly does the wiring and does it with cheap connectors.
@@R.N.GPerformance lmfao