FYI: if footage corrupts due to unexpected power loss (from the machines' POV), most DJI Products will un-corrupt it when you re-boot the device with the SD Card in it. Saved me from *_probably_* getting fired a couple of times.
@NURK FPV - It's 3 tx/rx and 1 rx-only ports according to the FCC documents. However, actual power testing has shown that only the top two connectors ever transmit anything. When using the AXII HDs you've got them on the rx-only connectors. That will somewhat hamper the retry mechanism which DJI relies on very heavily. FWIW, I run em plugged into the top two ports, and have some long AXII 2 "long range" omnis with right angle connectors in the bottom ports which stick up over the top of the goggles. Yes I have to remove and reinstall the omnis to fit in my bag, but they're a lot easier than removing/reinstalling the TrueRC antennas. If I want all directional, I use 2 Triple Feed patches on bottom connectors instead of the omnis.
I know that sounds nerdy, but I would have liked to see the Bitrate in an excel chart ;) I can send you a little script I wrote to convert srt files to csv, that is - if you have a valid recording ;) Great test tho, nice to see you are also not to keen about diving down into the woods. I always wanna do this, but never have the balls ;) Greets, Mario
I have had these for over a week and in my static penetration tests at 25mw, patches on top or bottom 2 ports had exact same results 39.6mbps ....but having onmis on top did better turned 90 n 180 from kwad.....sold all my VAS ions stubbys n crosshair xtremes already
@@Quadcopterguide hey, I can send you the link tomorrow or you just check my last test videos description. Let me know if you have troubles using it. And send me mail if you want, I also wrote an excel script to import csv and create chart for all files in one directory. Schim@gmx.at
@@Quadcopterguide you can just send me your SRT files (without video) and I would convert them for you - it's really quick and easy. Do you have excel? just send em via mail, I gave you my mailadress above...
Insane in the membrane... totally awesome run man ..I love the trail run...I would be in trouble. So Turk did I win the t shirt....lmao. Be Safe and RC Crazy. Thank You for your time I really appreciate it.
great video nurk. personally I've found the goggle 1000-1200mw setting to be night and day more powerful than the '700mw'. like over 4 times more transmission range. as though 700mw is only 200. what watts were you on the crossfire module? great vids man!
Many thanks again Nurk. I own both sets but don’t feel like taking the time to compare them. The convenience factor is a big one. Putting the X2’s on and taking them off is not convenient I don’t touch the antennas on any of my other sets of goggles because I’m a little bit lazy, and fortunately I don’t have to unless I want to try something new. So, I am grateful that you tested them for us. Also, I didn’t know that the DJI DVR stopped if it lost signal; thanks for that bit of knowledge too.👍👍
Sometimes I get disappointed with reviewers these days. They get things for free and never talk about cost vs effectiveness. If I got it all for free I would also be jumping for joy and all would be great.
Cuz he said ...stock antennas SUCK, dji specifically made them shit to lower output to meet FCC regulations, if ya want cheap get lollipops they work great
@NURKFPV Joshua Bardwell posted a video on mounting the AXII on the top vs the bottom. It was pretty interesting. (I'm commenting at 9mins so sorry if you discussed this!)
after your test i ordered them, because of size and handling. i really hope they are working well on the V2 googles the same good way. even with only 10% behind the others, it is still a good result.
@@creationlabsinc.189 Late? They just managed to get the first system running ok. There is more coming. We are still first adopters or what you call this craziness
I need to get those stock antenna's off my DJI FPV Goggles. I'm all about the form factor and being able to put my googles in a bag (convenience). Are the Lumenier AXII HD still the way to go or should I be looking at something newer already (I know this video was posted in Sept. 2020) ...I'll check the rest of your videos too...just to see if you tested anything else. Thanks for the review...I'm right there with you. Don't like the stock DJI antenna's...pain to pack up in a bag (and I know their not the best - FCC regulations and all).
Really digging the studio set up, looking forward to educational fpv stuff and shenanigans 🤘. Can’t wait for these to be back in stock, Dan dibble stubbies on the FatSharks just so I can fit them in my bag as is
Hello, I have a problem with my DJI FPV Goggles V2. One of the antennas got broken and I can't find a single replacement for it, only bundles. I am unsure if I can mix and match antennas, so I need some advice. Would it be possible to use a 5.8Hz antenna with my remaining stock antennas? Or would it be better to just buy two new antennas and replace them both? I don't have much knowledge about antennas, so any suggestions or recommendations would be greatly appreciated.
Good spot, and a good, thorough test. I especially like the wooded path as a penetration test. When the time comes, I'd really like to see FrostByte run the same course vs the DJI system.
Why do you connect the long range Antennas to the bottom why not the top? I have another aftermarket ones similar but I saw in the picture they were on top. Just wondering if im hooking it up wrong
I think I'd leave the AXII's on all the time. They are practically just as good, and easier to pack with them on all the time. Also glad you told us what you learned about DJI recording. Great video! Great video
When you switch the bottom 2 antennas to the patch antennas do you lose any omni directional capability? Reworded... if I use the patch antennas for long range and I switch to a short range flight where I want the best onmi capability should I unplug the patches and put in 4 omni antennas or does it not matter?
Very good review. Just got the dji goggles and vista. The form factor and how compact the antennas are impressive going to have to order one myself! These stock antennas suck!!Thanks 🙏🏻
Would there be any benefit of running one True RC Patch, AND one Lumenier AXII HD (like a combo)? Asking, because curious. Thank you. Never mind, it was addressed down below by a " Victor Galvez". Would you happen to have said footage of the combination of each patch, maybe in future works? Again, thanks.
Quick question Nurk. What is the compatibility of the fpv goggles with phantom 4 and mavic 2 pro? Also, can I have someone watching the live feed in the goggles while I use the feed in the tablet? Thanks for all the great content.
Awesome videos. I know this is an older one so i hope you are still commented on it. Have you done any comparisons of the dji transmitter vs crossfire? I've got the V1 goggles and have had a couple of drop outs with the crossfire even with it showing 92%LQ
Dude you gonna luv em...I have had these for over a week and in my static penetration tests at 25mw, patches on top or bottom 2 ports had exact same results 39.6mbps ....but having onmis on top did better turned 90 and 180 from kwad, so mine stay on top
mine didn’t come with the stubbies inside - did i get a cheaper package? I saw you pull those out i panicked, went and found the box and found just two holes where the stubbies were meant to go. but the box was sealed, so confused
Dude you gonna luv em...I have had these for over a week and in my static penetration tests at 25mw, top or bottom 2 ports had exact same results 39.6mbps ....but having onmis on top did better turned 180 from kwad, so mine stay on top
I've been looking into getting the DJI FPV Goggles but so far haven't seen many videos of a Radio Transmitter other than DJI's and I'm not a fan of DJI's radio so is it just a matter of using a different flight controller? I'm fairly new to the hobby just have used a few different Video Drones and GPS drones but I've been learning Acro with a simulator any differences you had to make or just any flight controller with the DJI Video controller?
most people are just using the caddex Vista air unit. I just bought an iflight nazgul 5 HD and all I had to do to run my radiomaster zorro was to solder on my elrs reciever onto the board.
Is it just me, or is the Lumenier AXII HD quite a bit cheaper? Seeing as you need to purchase 2x TRUE RC MX at 80$ each whilst the Lumenier is only 70$ for two?
This might be a stupid question but is there a reason to run the DJI system in 25mbps when it's capable of 50? Surely that means better range and penetration?
Does anyone know if these will work with the stock DJI air unit antennas? Do i need any special antennas on the drone itslelf? Thanks all - new here so apprecaite the help!
What if you swap out the stubbies for something more advance? The axll on bottom and larger antennas on top? That should really outperform true rc, right?
Hey Nurk - did you lower your camera angle when you went through the trees? Also, I have an all-white German Shepherd 8 week old arriving Saturday. I was inspired by your beautiful black beauty.
Flying LR over the lakes on the TrueRC held much stronger than the Lumeniers, like 15% better in range and 25% in performance. And 5-10% in penetration through the bush-course. We'll try to custom form factor the TrueRC antennas we sell a little better soon.
I use a simonk 30A ESC, and it catches fire every time i crash... Any suggestions please?? I am using KK 2 flight controller, 2200mah lipo battery and 1000kv bldc motors
exactly,,, I was wondering the same,,, a comparison to stock to the AXll antennas... is there that much difference with penetration....really appreciate that Nurk was testing in a dense wood forest...
I live in the Nederlands and i want to have the dji fpv drone and want to buy the best antenne booster and i have the best battery frommelde tesla and i paid 900euro for 1 batterij and the fly time is almost 90 minutes i have the best battery there are and i have made a deal with tesla and of i want to buy 100batterys the price is 600euro per batterij and the dji fpv drone can carry the waight of the batterij it is bigger then the dji fpv drone intelligent accu but now i have the best battery but now i have the range probleem and i want to send the dji fpv drone to a pro to make my DJI FPV drone an drone that can fly a range of several km and the reward is an tesla accu, but i have a secret that my father is the financial director of tesla netherlands but i have had help form a student that is a stagiaire who has bought the best drone that Israël has built and the noice is 8decibel and that is because the props are printed with safier and i have to have a 3D printer for myself to make my won props
Almost pulled the plug on these...but I'm now seeing 'iFlight' just put out the iFlight Crystal Patch Antennas.....I'm guessing they'll perform similarly but not much information out there on them yet. Hopefully, you'll have a chance to review those as well.
Very nice test but one thing just curious why you didn't end up using only one x-air antenna and the two Stubby's and just switched to the axii 2s? That seems to be more of a fair test but still nice to see how they perform against one another.
I’m still learning but I have a DJI FPV and I want to use your recommended set up. Have all stock stuff. Can I just add great antenna to the goggles to improve plus that 1200W hack? Please send help!
Andy rc did a video on why you should not change the dji antennas. Not sure if its a good idea to use third party antennas because dji antennas meet the safety requirments and shielding. But we will see in time if people start to get lumps on there heads
@@stewpidazole I have had these since 8/24 and in my static penetration tests thru block house at 25mw, top or bottom 2 ports had exact same results pointed direct 39.6mbps ....but having onmis on top did better turned 90 and 180 from kwad, so mine stay on top ;)....ur welcome
Hello Nurk, it would be good to do the test also connecting the antennas at the top, which according to other videos are responsible for transmitting and receiving. Greetings from Colombia
Nah ....3 ports send & recieve per fcc filing by dji m.imgur.com/R8TEFGW. Had these for a week, my static test at 25mw confirm, & i got higher mbps turned 90 & 180 w stubbys on top
Running the antenna sideways like that means the radiation pattern goes up and down, rather than side to side. Great for tall building but limits the angle side to side and isn't the optimal choice for the antenna design. Have you tried using two crosshair extreme? Smaller than your current antenna and as good punch with a better radiation pattern.
@@MoppelMat it is bust for storage? Where did he say it was bust for storage? Try to proof read your own comments for once mate! Also, if you watch he runs one of the antenna at a 45 rather than vertical, that's not correct position either. Try using your eyes for once mate!
@@MoppelMat riiiiiigh. Giving advice on how to run directional antennas correctly is trolling. Lol 😂 you sure are salty, I bet your mother was a sailor.
If urs are lhcp, just buy the patches dude and keep the stubbs on top....3 ports send & recieve per fcc filing by dji m.imgur.com/R8TEFGW. Had these for a week, my static test at 25mw confirm, & i got higher mbps turned 90 & 180 w stubbys on top
Will this work well with DJI Goggles 2.0 for their FPV Drone combo system? I would love to be able to increase range/performance. We added Alientech and 4Hawks antennas to our Mavic 2 controllers for better performance and are somewhat happy. Thanks!
great video, i would like to get a answer of the sma ports from DJI i seen a few video that contradict each other. Glad you learn something about the dvr w/o losing the drone.
Guys. I really like these videos, trying to find out, what is the best equippement for us. Even if this isent a scientic approach, like rcschimm's attrmps. You guy just missed a critical point. The goggles (Antennas) must be in a lock, fixed position. A slight move with the head makes huge differents in such a high gain antennas. ❤
You need to ask your sponsors for some new hats Bro :) Keep up the good video's! It would have been awesome if reversed the patches from bottom to top to see if there was a difference.
FYI: if footage corrupts due to unexpected power loss (from the machines' POV), most DJI Products will un-corrupt it when you re-boot the device with the SD Card in it. Saved me from *_probably_* getting fired a couple of times.
Oh man. You seemed so relaxed when the video dropped. I would have 💩 my pants.
@NURK FPV - It's 3 tx/rx and 1 rx-only ports according to the FCC documents. However, actual power testing has shown that only the top two connectors ever transmit anything.
When using the AXII HDs you've got them on the rx-only connectors. That will somewhat hamper the retry mechanism which DJI relies on very heavily.
FWIW, I run em plugged into the top two ports, and have some long AXII 2 "long range" omnis with right angle connectors in the bottom ports which stick up over the top of the goggles.
Yes I have to remove and reinstall the omnis to fit in my bag, but they're a lot easier than removing/reinstalling the TrueRC antennas. If I want all directional, I use 2 Triple Feed patches on bottom connectors instead of the omnis.
Nurk getting all professional with his production quality. Looking good
I know that sounds nerdy, but I would have liked to see the Bitrate in an excel chart ;)
I can send you a little script I wrote to convert srt files to csv, that is - if you have a valid recording ;)
Great test tho, nice to see you are also not to keen about diving down into the woods. I always wanna do this, but never have the balls ;)
Greets, Mario
I have had these for over a week and in my static penetration tests at 25mw, patches on top or bottom 2 ports had exact same results 39.6mbps ....but having onmis on top did better turned 90 n 180 from kwad.....sold all my VAS ions stubbys n crosshair xtremes already
Mario, that script sounds sweet. Would you mind sharing it? I’d like to use it for some antenna testing on the channel.
@@Quadcopterguide hey, I can send you the link tomorrow or you just check
my last test videos description. Let me know if you have troubles using it.
And send me mail if you want, I also wrote an excel script to import csv and create chart for all files in one directory. Schim@gmx.at
RCSchim will check it out. Danke! Then realized I’m on Mac so will have to see if i can get it to work. Thanks again.
@@Quadcopterguide you can just send me your SRT files (without video) and I would convert them for you - it's really quick and easy. Do you have excel? just send em via mail, I gave you my mailadress above...
Insane in the membrane... totally awesome run man ..I love the trail run...I would be in trouble. So Turk did I win the t shirt....lmao. Be Safe and RC Crazy. Thank You for your time I really appreciate it.
This guy is doing signal testing over a lake!!! Balls of steel!! Smh. Lol
Yup- NURK THE NERD BOY HAS GOT SOME “NARDS” THATS FIR SURE LMAO !
Explains why he talk about "penetration" so much
I'm going for the minimalist approach. Keeping everything small and compact. Oddly enough that means the AXII over the stock antennas.
Thank you for the review Nurk! Please keep making your videos, we really appreciate them brotha!
The x-acto throw in the table was so smooth lol
Pretty nice flying, Paul! Great testing!!! 😃
Honestly, the difference seems pretty small!
Stay safe there with your family! 🖖😊
great video nurk. personally I've found the goggle 1000-1200mw setting to be night and day more powerful than the '700mw'. like over 4 times more transmission range. as though 700mw is only 200.
what watts were you on the crossfire module? great vids man!
You had my heart pounding on the last lap of the tree penetration test
Good! Muah hahaha
Yeah he was having a penetration test with camera man 😂😂😂
Many thanks again Nurk. I own both sets but don’t feel like taking the time to compare them. The convenience factor is a big one. Putting the X2’s on and taking them off is not convenient I don’t touch the antennas on any of my other sets of goggles because I’m a little bit lazy, and fortunately I don’t have to unless I want to try something new. So, I am grateful that you tested them for us. Also, I didn’t know that the DJI DVR stopped if it lost signal; thanks for that bit of knowledge too.👍👍
Tru rc x air is so good long range and penetration compare to stock antenna
When you chucked the package on the table, I got mystery tech vibes and it was great
Over 2 miles nice. That got hairier than your beard. Nice test your killing it Nurk
the middle of the lake is right below us: it is the time to test failsafe, RTH, how it survives goggles switching off and TX switching off.
Hey - Do you have a comparison between the Axii / TrueRC patch antennas and the stock Dji antennas? Just curious what boost you get.
This video needs a good rename. I had so much trouble finding it. Thanks for making it though. I really appreciate it
I wanted to see the stock antenna test as well nurk. Whyyyyyyyyy lol
So do I 😊
Yeah... Had no issues with stock doing long range so far....
Wtf? 25m/bits? Update that shit and test the stock antenna at 50mbs, please? :-)
Sometimes I get disappointed with reviewers these days. They get things for free and never talk about cost vs effectiveness. If I got it all for free I would also be jumping for joy and all would be great.
Cuz he said ...stock antennas SUCK, dji specifically made them shit to lower output to meet FCC regulations, if ya want cheap get lollipops they work great
Hi will these work flying the stock dji fpv that comes with the combo.
Out the box that comes from dji .
Many thanks.
Great Vid Nurk, whilst I don't have DJI at the moment I'm close to making my next quad HD so this is great information. Thanks mate.
Its totally worth it, its a transformative experience after flying with garbage all this time.
Haha, I recognize that park. I lived in Indianapolis for a year and that one of the first parks I flew FPV at.
Talk about trust in your gear. "New antennas? Let's fly over water" o.O!
That scalpel dart move made me so happy no lie
yeah mate
@NURKFPV Joshua Bardwell posted a video on mounting the AXII on the top vs the bottom. It was pretty interesting. (I'm commenting at 9mins so sorry if you discussed this!)
after your test i ordered them, because of size and handling. i really hope they are working well on the V2 googles the same good way. even with only 10% behind the others, it is still a good result.
I’m in the same boat as you. Lol still headhunting the best antennas for my first upgrade on these
I’m so late to the HD party.
@@creationlabsinc.189 Late? They just managed to get the first system running ok. There is more coming. We are still first adopters or what you call this craziness
And now my question! Is this still a Good Choice with the v2 Version?
I need to get those stock antenna's off my DJI FPV Goggles. I'm all about the form factor and being able to put my googles in a bag (convenience). Are the Lumenier AXII HD still the way to go or should I be looking at something newer already (I know this video was posted in Sept. 2020) ...I'll check the rest of your videos too...just to see if you tested anything else. Thanks for the review...I'm right there with you. Don't like the stock DJI antenna's...pain to pack up in a bag (and I know their not the best - FCC regulations and all).
Really digging the studio set up, looking forward to educational fpv stuff and shenanigans 🤘. Can’t wait for these to be back in stock, Dan dibble stubbies on the FatSharks just so I can fit them in my bag as is
wth u did with your goggles? there scratched and bumped soo bad... wow...im using mine very heavy, but it doesnt seem like yours...
Hello,
I have a problem with my DJI FPV Goggles V2. One of the antennas got broken and I can't find a single replacement for it, only bundles. I am unsure if I can mix and match antennas, so I need some advice.
Would it be possible to use a 5.8Hz antenna with my remaining stock antennas? Or would it be better to just buy two new antennas and replace them both? I don't have much knowledge about antennas, so any suggestions or recommendations would be greatly appreciated.
Good spot, and a good, thorough test. I especially like the wooded path as a penetration test. When the time comes, I'd really like to see FrostByte run the same course vs the DJI system.
The way you dropped the drone at 8:30 lol 4 foot drop for landing
Why do you connect the long range Antennas to the bottom why not the top? I have another aftermarket ones similar but I saw in the picture they were on top. Just wondering if im hooking it up wrong
I think I'd leave the AXII's on all the time. They are practically just as good, and easier to pack with them on all the time.
Also glad you told us what you learned about DJI recording.
Great video!
Great video
instaBlaster
Which antenna upgrade is compatible with that bid analog adapter? Or just get upgraded antennas? (No patch for the eye piece?)
When you switch the bottom 2 antennas to the patch antennas do you lose any omni directional capability? Reworded... if I use the patch antennas for long range and I switch to a short range flight where I want the best onmi capability should I unplug the patches and put in 4 omni antennas or does it not matter?
hi
, quick question , for max range on dji air unit v1 with googles v1 , do you think 25mb/s and low latency got more range than 50mb/s low latency ?
Very good review. Just got the dji goggles and vista. The form factor and how compact the antennas are impressive going to have to order one myself! These stock antennas suck!!Thanks 🙏🏻
Would there be any benefit of running one True RC Patch, AND one Lumenier AXII HD (like a combo)? Asking, because curious.
Thank you.
Never mind, it was addressed down below by a " Victor Galvez".
Would you happen to have said footage of the combination of each patch, maybe in future works?
Again, thanks.
Quick question Nurk. What is the compatibility of the fpv goggles with phantom 4 and mavic 2 pro? Also, can I have someone watching the live feed in the goggles while I use the feed in the tablet? Thanks for all the great content.
have you tried the DragonWing FPV Drone antennas, just wondering what you thoughts are
If you take a look at the link you gave the antenna attachments are different than yours. Have you right attached the antennas?
Thanks a lot for the awesome video...is it possible to use two cameras and switch between there views for live stream ?
Surprised to see only 3km maximum with patch antennas. Isn't DJI advertising up to 4km line of sight reception with the stock stubby antennas ?
Awesome videos. I know this is an older one so i hope you are still commented on it. Have you done any comparisons of the dji transmitter vs crossfire? I've got the V1 goggles and have had a couple of drop outs with the crossfire even with it showing 92%LQ
Another great video! I ordered these and now feel good that I don’t need the True RC antennas.
Dude you gonna luv em...I have had these for over a week and in my static penetration tests at 25mw, patches on top or bottom 2 ports had exact same results 39.6mbps ....but having onmis on top did better turned 90 and 180 from kwad, so mine stay on top
Got them, so thanks for testing. saves me the effort in finding out , much appreciated
mine didn’t come with the stubbies inside - did i get a cheaper package? I saw you pull those out i panicked, went and found the box and found just two holes where the stubbies were meant to go. but the box was sealed, so confused
@@danimalthefirst
There are two different kits. The complete kit is around 70 ducketts
Drew Hampton nice one, thanks for clearing that up Drew
can you maybe do a follow up with the dji google v2? also did you use the stock antennas on the air unit?
Please redo the test with the patches on top. just ordered mine from getfpv, hope they are better than stock😄
Dude you gonna luv em...I have had these for over a week and in my static penetration tests at 25mw, top or bottom 2 ports had exact same results 39.6mbps ....but having onmis on top did better turned 180 from kwad, so mine stay on top
I saw another reviewer saying that the top antennas both send and receive data whereas the bottoms only receive. Wouldn’t this affect the results?
@@etops.flight 3 ports send recieve per fcc filing by dji m.imgur.com/R8TEFGW
I've been looking into getting the DJI FPV Goggles but so far haven't seen many videos of a Radio Transmitter other than DJI's and I'm not a fan of DJI's radio so is it just a matter of using a different flight controller? I'm fairly new to the hobby just have used a few different Video Drones and GPS drones but I've been learning Acro with a simulator any differences you had to make or just any flight controller with the DJI Video controller?
most people are just using the caddex Vista air unit. I just bought an iflight nazgul 5 HD and all I had to do to run my radiomaster zorro was to solder on my elrs reciever onto the board.
Great Video... I Just got into the Hobie and cant wait to do something cool like this..
Is it just me, or is the Lumenier AXII HD quite a bit cheaper? Seeing as you need to purchase 2x TRUE RC MX at 80$ each whilst the Lumenier is only 70$ for two?
How do you record or get the GPS map overlay? I have GPS on one quad, but I find no way to record the GPS data..
This might be a stupid question but is there a reason to run the DJI system in 25mbps when it's capable of 50? Surely that means better range and penetration?
Does anyone know if these will work with the stock DJI air unit antennas? Do i need any special antennas on the drone itslelf?
Thanks all - new here so apprecaite the help!
They will
@@NURKFPV thanks Nurk! Your the reason I got into this. Documenting the journey been a blast! Thanks for your tutorials etc!
What if you swap out the stubbies for something more advance? The axll on bottom and larger antennas on top? That should really outperform true rc, right?
please wood you do a fatshark VS DJI in the same spot i am interested in that test not sure if i want a DJI yet trying to figure that out thanks
You definitely want DJI, it crushes everything on the market outside of special long range gear.
Let me help.....digi is 300 trillion times better than analog.. proof?...watch any of my vids, all dji goggle dvr superviewed w beats of course ;)
awesome … will it work as good if i use it to fly the DJI FPV???
thanks
Hey Nurk - did you lower your camera angle when you went through the trees? Also, I have an all-white German Shepherd 8 week old arriving Saturday. I was inspired by your beautiful black beauty.
I left it the same place I always leave it
Flying LR over the lakes on the TrueRC held much stronger than the Lumeniers, like 15% better in range and 25% in performance. And 5-10% in penetration through the bush-course. We'll try to custom form factor the TrueRC antennas we sell a little better soon.
Im new, one is antenna, the other is called patch? Do they work together?
I use a simonk 30A ESC, and it catches fire every time i crash... Any suggestions please??
I am using KK 2 flight controller, 2200mah lipo battery and 1000kv bldc motors
Great video! Would have been interesting to have seen what the stock antennas would do
exactly,,, I was wondering the same,,, a comparison to stock to the AXll antennas... is there that much difference with penetration....really appreciate that Nurk was testing in a dense wood forest...
I live in the Nederlands and i want to have the dji fpv drone and want to buy the best antenne booster and i have the best battery frommelde tesla and i paid 900euro for 1 batterij and the fly time is almost 90 minutes i have the best battery there are and i have made a deal with tesla and of i want to buy 100batterys the price is 600euro per batterij and the dji fpv drone can carry the waight of the batterij it is bigger then the dji fpv drone intelligent accu but now i have the best battery but now i have the range probleem and i want to send the dji fpv drone to a pro to make my DJI FPV drone an drone that can fly a range of several km and the reward is an tesla accu, but i have a secret that my father is the financial director of tesla netherlands but i have had help form a student that is a stagiaire who has bought the best drone that Israël has built and the noice is 8decibel and that is because the props are printed with safier and i have to have a 3D printer for myself to make my won props
Great comparitives! Practical Paul
Almost pulled the plug on these...but I'm now seeing 'iFlight' just put out the iFlight Crystal Patch Antennas.....I'm guessing they'll perform similarly but not much information out there on them yet. Hopefully, you'll have a chance to review those as well.
I definitely recommend supporting more usa companies!
@@NURKFPV Didn't even notice that...still getting the FPV 'basics' under my belt but certainly a consideration. Gotta keep it local when we can!
Hello great video how did you manage to record real time the position of the drone moving on the map thank you
Range and penetration!! Nuff said! Subscribed!!
Very nice test but one thing just curious why you didn't end up using only one x-air antenna and the two Stubby's and just switched to the axii 2s? That seems to be more of a fair test but still nice to see how they perform against one another.
Are the True RC stubby's worth getting over the stock dji antennas?
How do truerc stubbys compare to just the lumenier stubbys?
What's the battery set up that you have for your DJI goggles?
I’m still learning but I have a DJI FPV and I want to use your recommended set up. Have all stock stuff. Can I just add great antenna to the goggles to improve plus that 1200W hack? Please send help!
Yep. I don't even use 1200
I like the "benchmark" testing :) 14:43
Witch are the best and What is the price
Andy rc did a video on why you should not change the dji antennas. Not sure if its a good idea to use third party antennas because dji antennas meet the safety requirments and shielding. But we will see in time if people start to get lumps on there heads
How far do you think the stock antennas would of gotten you over the lake?
Where is this trail at? Thanks Nurk.
Now do it all again with the axii patches on top
Dont matter dude only 1 port is rx only per dji fcc filing m.imgur.com/R8TEFGW
@@flo-ridafpv5713 wrong. better with patches on top
@@stewpidazole I have had these since 8/24 and in my static penetration tests thru block house at 25mw, top or bottom 2 ports had exact same results pointed direct 39.6mbps ....but having onmis on top did better turned 90 and 180 from kwad, so mine stay on top ;)....ur welcome
Doesn't really explain that Chinese guys video showing better penetration with patch up top though does it.....
@@Clynikal didnt see that vid, but i hear at super long range directionals on top is best
Hello Nurk, it would be good to do the test also connecting the antennas at the top, which according to other videos are responsible for transmitting and receiving. Greetings from Colombia
Nah ....3 ports send & recieve per fcc filing by dji m.imgur.com/R8TEFGW. Had these for a week, my static test at 25mw confirm, & i got higher mbps turned 90 & 180 w stubbys on top
Running the antenna sideways like that means the radiation pattern goes up and down, rather than side to side. Great for tall building but limits the angle side to side and isn't the optimal choice for the antenna design.
Have you tried using two crosshair extreme? Smaller than your current antenna and as good punch with a better radiation pattern.
It is bust for storage, not flying! Try to listen for once mate
@@MoppelMat it is bust for storage? Where did he say it was bust for storage? Try to proof read your own comments for once mate!
Also, if you watch he runs one of the antenna at a 45 rather than vertical, that's not correct position either.
Try using your eyes for once mate!
N0FPV yeah. Troll on mr
@@MoppelMat riiiiiigh. Giving advice on how to run directional antennas correctly is trolling. Lol 😂 you sure are salty, I bet your mother was a sailor.
I don't know what all this is but why don't you use 1.2ghz?
I have trueRC stubby antenna on now ,, do you think can use them with AXII patch or should use AXll stubs ?? great review Thanks man
If urs are lhcp, just buy the patches dude and keep the stubbs on top....3 ports send & recieve per fcc filing by dji m.imgur.com/R8TEFGW. Had these for a week, my static test at 25mw confirm, & i got higher mbps turned 90 & 180 w stubbys on top
@@flo-ridafpv5713 Thanks Man 👍🏻💰💰💰
Try these Menace DJI HD Antenna Pack .loving em so far.
how did you fix the corrupted recording?
What would you use with dji fpv drone?
Great flying!
Now it's time to try with stock anntenas? :)
oh but its not "cool" to use stock ! someone should make a 3D cover to put over stock.
3 way test next please o bearded one. What was the product quality like ? There’s been some bad sets sent out with glue all over them.
what the total cost for all the controller's goggles and drone and batteries? Can you send a link to where I can buy a badass drone like your.
If you want to just buy something off the shelf, this is what you need: bit.ly/3neamLD
@@NURKFPV Thankyou I can't wait to start flying instead of destroying my #krakenrc
Will this work well with DJI Goggles 2.0 for their FPV Drone combo system?
I would love to be able to increase range/performance.
We added Alientech and 4Hawks antennas to our Mavic 2 controllers for better performance and are somewhat happy.
Thanks!
Yes it will
Will it work in both V1 and V2 DJI goggles?
great video, i would like to get a answer of the sma ports from DJI i seen a few video that contradict each other. Glad you learn something about the dvr w/o losing the drone.
Here ya go, 3 ports send & recieve per fcc filing by dji m.imgur.com/R8TEFGW. My axii hd static test at 25mw confirm
Would this antenna work well with the stock antenna that comes with the Caddx vista
Yes
Guys. I really like these videos, trying to find out, what is the best equippement for us. Even if this isent a scientic approach, like rcschimm's attrmps. You guy just missed a critical point. The goggles (Antennas) must be in a lock, fixed position. A slight move with the head makes huge differents in such a high gain antennas. ❤
Noob question: Why does Blue.FPV have so much longer range than this?
You need to ask your sponsors for some new hats Bro :) Keep up the good video's! It would have been awesome if reversed the patches from bottom to top to see if there was a difference.
yoo you live in clearlake brother??? Ca?