Thank you. I've been waiting to see a confirmation on this from anyone... Glad it's working. Obviously the built-in "Road Link" is adequate. I was worrying that I'd have to downgrade to an 6800 RD + Roadlink to fit my 11-42T Cassette
Chet Langford No he is saying to remove the washer at the b screw so it it can go farther in. You will only be able to use up to 40cog if you dont do this.
yeeeeesssssssss! yea bro! you think it will do a 11-46??? i want to do this with the 46t xt ! let me know you just got a new sub!!!!! plus im putting a oval 38t 1x on my ultegra 8000 crank
Thank you. I've been waiting to see a confirmation on this from anyone... Glad it's working. Obviously the built-in "Road Link" is adequate. I was worrying that I'd have to downgrade to an 6800 RD + Roadlink to fit my 11-42T Cassette
Instablaster.
Great video! Thanks mate!
The video provider say with 42T need to untie waher of B screw.
40T just stay the way they are.
Will be expecting 46T video from you Langford sir.
下爪要換嗎?
What size cassette can the Short cage version fit?
I got the answer on my channel
Did it work in the big big?
介紹的很清楚．受益良多
你最好的兄弟
im so sorry i wish i could speak your language but at 3:50 are you talking about making the b screw longer to fit a 46t?
Chet Langford No he is saying to remove the washer at the b screw so it it can go farther in. You will only be able to use up to 40cog if you dont do this.
@@schmuak Not in the video, but you can just get a longer screw. Those are M4×12.5mm, and you can easily find M4×14 or 16 in hardware stores.
very nice setup bro great job!
Hi
I run 3x10 speed system with 11-36t. I wanna upgrade it to 11-42t and keep 3x10s. Will it wodk with my deore xt m781 rear mech?
爬90度的坡嗎XD
For better, need Nautilus goatlink and replace original rear end of the RD.
does it require a spacer to fit mtb cassette on a road hub?
Wayne Wang Yes, it require a spacer on a road hub.
1.85mm one, the same that are used to fit 10s cassettes on a 11s freehub body.
換後飞轮不如換大盘？
可是如果還要速度的話，換飛輪的確是好選擇
r7000可以用嗎？
yeeeeesssssssss! yea bro! you think it will do a 11-46??? i want to do this with the 46t xt ! let me know you just got a new sub!!!!! plus im putting a oval 38t 1x on my ultegra 8000 crank
And You really need 42T?
Why you watch it
后拨线管太长了
其實還好 一般後變速外管線長度落在30cm 太短太長會影響順暢度
@@LayWay_exe 我见很多用新款影子后拨的都只留不到10cm在车架外面，不过出线孔靠近叉脚。这个车架的出线孔比较靠前，我觉得这线管还可以再截个几cm, 还可以增加一点气动玄学。
What the hell you think about?!
起步一般不会用太大的齿片吧？最常用都是最小的那几个
在坡上起步用小的會摔死
平地在起步時
大齒片起步在切到小齒片其實會比直接用大齒片起步來的快
30T打天下😂，42T有點誇張
我怎樣也調不好 最大對最大的時候 前變一定卡到鍊條
可以的話，建議不要大對大，大對大基本上一定會磨到，大盤對二檔幾乎是極限了，再上去建議降小盤
@@Gryphus9277 就是 我就因為看到youtube的人組裝完車最後調變速,在大對大的時候好像好正常,真想請他來我這邊,來,調給我看.
@@980120 但電變大對大是不會磨到，因為電變都有自動校正的功能
山地车？
即(登山車)
山地車是對岸(中國)的說法