Creating a big door opening rsj fit

Поділитися
Вставка
  • Опубліковано 7 лют 2025
  • fitting steel beam across door way load bearing

КОМЕНТАРІ • 37

  • @brickrightbuildinglandscaping
    @brickrightbuildinglandscaping 5 місяців тому +1

    Showing all your talents again Mark.
    Hope you had a nice holiday mate 👍

    • @markhep
      @markhep  5 місяців тому +1

      @@brickrightbuildinglandscaping cheers justin.yes was fantastic need it lol .will have to watch a few of your videos now I got the time again .I was working every weekend before I went away for some spending money lol 👍👍

    • @brickrightbuildinglandscaping
      @brickrightbuildinglandscaping 5 місяців тому +1

      @@markhep
      I no the feeling Mark.
      As long as you enjoyed it mate you deserved it mate 👍

    • @markhep
      @markhep  5 місяців тому +1

      @@brickrightbuildinglandscaping yere mate was well worth it 👍👍

  • @smarty0604
    @smarty0604 5 місяців тому +1

    Hahah that was fun . Lifting those steels in reminded me of causality right at the beginning of the program where’s there’s a dude up a ladder ready to go over 😂
    Nice work chaps

    • @markhep
      @markhep  5 місяців тому

      @@smarty0604 🤣I getting too old for this stuff 🤣👍👍

  • @marcopetrillo6867
    @marcopetrillo6867 5 місяців тому +1

    Funny as watching you lift the big steel inside 😂 did well to get that up there, always a tense moment when it's above your head hoping the arms don't give in

    • @markhep
      @markhep  5 місяців тому

      @@marcopetrillo6867 🤣 thought we were stuck at one point lol 👍👍

  • @SteveAndAlexBuild
    @SteveAndAlexBuild 5 місяців тому +2

    Massive respect for taking that job on mark . We don’t do big steels if we can avoid them .
    Weird decision to leave the archs in . Easier for you though which is always good 👌🏼😁🧱👍🏽

    • @markhep
      @markhep  5 місяців тому

      Cheers mate .yere they like the old look this place used to be a hall or church or something.so they trying to keep as much as it as they can 👍👍👍

  • @nigel1964
    @nigel1964 5 місяців тому +2

    What a challenge Mark. As usual you come up with a solution and the end result ain't half bad. Thanks for the video warts and all. Take care 🧱🧱👌

    • @markhep
      @markhep  5 місяців тому +1

      @@nigel1964 cheers Nigel yere it looks good now got the doors in .just got to go back hopefully next week then I can finish the next video off .they are getting the kitchen installed now it's looking good 👍👍

  • @DIY_Dad_Pat
    @DIY_Dad_Pat 5 місяців тому +3

    Mark that was a challenge getting those blocks in using the hammer. But you are the man that can sort it 🤜🧱🤛 I hope you enjoyed your holiday

    • @DIY_Dad_Pat
      @DIY_Dad_Pat 5 місяців тому +1

      Tim is a monster lifting that steel

    • @markhep
      @markhep  5 місяців тому +1

      @@DIY_Dad_Pat cheers pat.yes holiday was very good .I feel great again now 👍👍👍

    • @markhep
      @markhep  5 місяців тому +1

      @@DIY_Dad_Pat 👍👍👍

  • @daverichardson5861
    @daverichardson5861 5 місяців тому +2

    Yep, you needed a hol after lifting that! Great vlog Mark, good to see you back at it. Stay well.

    • @markhep
      @markhep  5 місяців тому

      @@daverichardson5861 cheers dave.yere was an amazing holiday good brake .feel good again now 👍👍👍

  • @michaelingram4539
    @michaelingram4539 5 місяців тому +2

    Nice work Mark 👍 you are the A team

    • @markhep
      @markhep  5 місяців тому

      Cheers mate .was a good job this one enjoyed it 👍👍👍

  • @kingofthetrowel1725
    @kingofthetrowel1725 5 місяців тому +1

    Nice one mark 💪👍🙌🏻

    • @markhep
      @markhep  5 місяців тому

      @@kingofthetrowel1725 cheers mate 👍👍

  • @malcelwell7209
    @malcelwell7209 5 місяців тому +1

    Nice to have you back mark and straight back at it 💪😊

    • @markhep
      @markhep  5 місяців тому

      @@malcelwell7209 cheers mate .yere had a good holiday got rid of the back ake for a few weeks lol 👍👍👍

  • @robertmorris5214
    @robertmorris5214 5 місяців тому +1

    Nice one Mark

    • @markhep
      @markhep  5 місяців тому

      @@robertmorris5214 thanks mate 👍

  • @alanhowell2618
    @alanhowell2618 5 місяців тому +1

    They are really safety concerned working off one board

  • @brickbybric
    @brickbybric 5 місяців тому +1

    Nice job mark . That trowel is old , it doesn’t look like marshalltown is printed on the handle mark .

    • @markhep
      @markhep  5 місяців тому +1

      @@brickbybric cheers mate yes mega old ist my second trowel I ever got it about 9in now lol .I use it for all the small stuff getting in small gaps .it doesn't wear down.when marshall town made the to last .the new ones were down so much faster 👍👍

  • @sammy_bw
    @sammy_bw 5 місяців тому +1

    Recognise this house I drive past everyday, I live just round the corner. was it always a house? it’s one I never noticed till the garden was being landscaped?

    • @markhep
      @markhep  5 місяців тому

      Hi mate I think it was like a community hall or church something like that 👍👍👍

  • @darrenhaybuilder8824
    @darrenhaybuilder8824 4 місяці тому +1

    Its 300mm rest either side not the standard for over 2.3m ?

    • @markhep
      @markhep  4 місяці тому

      150mm minimum.but more the better I suppose 👍

  • @joroyle8108
    @joroyle8108 5 місяців тому +1

    The lads not had is weetabix

    • @markhep
      @markhep  5 місяців тому +1

      🤣I feel like everyday that goes by I just get weaker lol 🤣👍👍

  • @glynnepritchard2526
    @glynnepritchard2526 5 місяців тому +1

    Ah building inspectors, yeah fit a cavity tray... I think the clues in the name

    • @markhep
      @markhep  5 місяців тому

      @@glynnepritchard2526 🤣yere bloody ridiculous the guy didn't have a clue .he told me he was used to new builds lol 👍👍